C4i HDV-P332 All To HDMI 4K Converter Box User Manual

June 5, 2024
C4i

ALL TO HDMI 4K
CONVERTER BOX
User Manual

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.

Introduction

ALL TO HDMI 4K CONVERTER BOX converts CVBS, YPbPr, VGA, HDMI and USB media to 720p and 1080p high definition 4k HDMI output.
Respective stereo audio input is achieved for CVBS, YPbPr and VGA. Converter Box makes it convenient to connect such as DVD player, game player, Set-top box, PC and USB device etc. video sources. All inputs will be converted to high definition output. Excellent picture quality provided by the integrated noise reduction, advanced color process engine, dynamic luminance control, gamma control and 3D video decoder features.

Features

  • 1x CVBS, 1xYPbPr, 1xVGA, 2x HDMI and, 2x USB inputs
  • USB movie, picture and music playback
  • 1280×1024,720p,1080p and 4K HDMI output
  • PAL, NTSC and SECAM color systems supported
  • -5% to +5% display ratio range control
  • Auto Detect function (except USB)
  • Brightness, contrast, color, sharpness, hue control
  • Soft, Standard, Bright and Personal 4 preset picture modes
  • Picture mode setting saved for respective source
  • Geometry control for VGA input with auto tune function
  • Capture USB picture and save as user defined logo
  • Volume control
  • Remote control
  • Standby mode

Input formats

CVBS: PAL, NTSC, SECAM with stereo audio input YPbPr: 1080p@50/60Hz, 1080i@50/60Hz, 720p@50/60Hz, 576i/p, 480i/p with stereo audio input
VGA:640×480@60Hz, 800×600@60Hz, 1024×768@60Hz, 1280×1024@60Hz, 1280×720@60Hz, 1360×768@60Hz, 1440×900@60Hz, 1680×1050@60Hz, 1920×1080@60Hz with stereo audio input HDMI: 480i to 4K2K@30Hz USB: MPEG, H.264, RM/RMVB movie decode, JPEG, BMP, PNG Picture decode and MPEG1/2, MP3 audio decode

Package Contents

ALL TO HDMI CONVERTER BOX 1pcs
5V/2A DC power adaptor 1pcs
Operation Manual 1pcs
IR Remote 1pcs

Panel Functions

Part 1. IR: IR Receiver window (accepts the remote control signal of this device only).
Part 2. LED: The LED will illuminate blue when the power is on, red when it is in ‘Standby’ mode.
Part 3. DC POWER INPUT: Plug the 5V/2A DC power supply into the DC 5V power in.
Part 4. Digital audio output: The coaxial output is connected an audio amplifier.
Part 5. Component and audio input: Connect a DVD (YPbPr) source to the YPbPr IN RCA connector.
Part 6. CVBS and audio input Connect a composite video source (for example, a composite video player) to the CVBS IN RCA connector.
Part 7. HDMI INPUT Connect to HDMI sources such as DVD player /Blu-ray player for both video and audio signal conversion.
Part 8. VGA INPUT: Connect a computer (RGBHV) source to the VGA IN video input D-Sub 15pin HD connector.
Part 9. HDMI OUTPUT: Connect the HDMI output connector to an HDMI equipped (for examples, TVs or monitors).

Setting

Remote controller

Power: Enter standby mode or re-enter normal mode
Source: Pop up source menu, press Up/Down button to select and press OK button to enter
USB: Enter USB source directly
Picture: Soft, Standard, Bright and Personal picture mode selection
Ratio: Adjust display ratio, -5% to +5% range can be set
Navigation buttons: Left, Right, Up and Down to navigate menu items or USB media files, press OK to enter
OK: Confirm and enter selection
Menu: Pop up main menu, press Menu button again to return
Exit: Close Menu or exit USB playback mode
Vol-: Decrease volume
Vol+: Increase volume
Output: Set 1280×1024@60Hz,720p@60Hz,1080p@60Hz or 4K2K@30Hz output format

Source menu

  1. Press Source button to pop up source menu
  2. Press Up/Down button to select source item
  3. Then press OK button to enter

Main menu
General control

  1. Press Menu button to pop up main menu
  2. Press Up/Down button to select Picture, Geometry or Setting menu
  3.  Then press Right button to enter

Control for Picture menu

  1. Press Left/Right button to select Soft, Standard, Bright or Personal picture mode
  2. Note that only Personal picture mode settings can be adjusted, others are pre-set modes
  3. Press Up/Down button to select menu item
  4. Press OK button to enter
  5. Then press Left/Right button to adjust
  6. Press Menu button to return, or press Exit button to close menu

Control for setting menu

  1. Press Left/Right button to set Auto Detect function On or Off
  2. Note that when Auto Detect is set On, the converter will automatically switch to the source which is connected with signal lately, except for USB source.

USB menu
General control

  1. Press USB button directly or select USB from source menu to enter USB device playback mode

  2. Press Menu button to pop up media type selection menu

  3. Press Left/Right button to set which type of media to play

  4. Press OK button to confirm

  5. Press Left/Right to select USB device (disk alias)

  6. Press OK button to browse media file

  7. Press Left/Right/Up/Down button to select media file

  8. Press OK button to play

Movie playback control

| Play| | Repeat
---|---|---|---
| Pause| | Repeat A<->B
| Fast Backward| | Media file information
| Fast Forward| | Slow Forward
| Previous| | Ratio
| Next| | Brightness
| Stop| | Contrast

Picture playback control

| Slide show| | Zoom in
---|---|---|---
| Pause| | Zoom out
| Previous| | Move
| Next| | Repeat
| Stop| | Brightness
| Rotate clockwise| | Contrast
| Rotate anti-clockwise| | Capture and save
as logo
| Background music| |

Audio playback control

| Play| | Next
---|---|---|---
| Pause| | Stop
| Fast Backward| | Repeat
| Fast Forward| | Mute
| Previous| | Mediafile information

Connection Diagram

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals