SONGX SX06 True Wireless Earbuds User Manual

SX06 True Wireless Earbuds
User Manual

Product overview

What’s in the Box

SX06 Earbuds……………………….
SX06 Charging Case…………………………..
Silicone Ear Tips (S/M/0…………………………………..
Type—C USB Cable………………………………
User Manual………………………………

How to Pair

1. For the first time, take out the earbuds from the charging case, remove the insulation films, and put the earbuds back into the charging case.

2. Open the charging case, after a few seconds, the Infilte LED on L&R earbuds will flash together, the earbuds will turn to pair mode.

3. Select “SONG )(under Bluetooth menu on your device. The pairing is successful.

4.  Congratulations, your earbuds are connected successfully. You can choose to use them at TWS Mode or MONO Mode.

5. The next time you use it, open the charging case, it will automatically connect to your device, LED lights will always—on.

6. Connect to a New Device When you want to connect to a new device, disconnect this connection, the earbuds will turn to pair mode.

Tap Control

Note 1. The functions of Reertuis are the Sent, end the functions of mono mode end TWS mode we the mere
2. Supped’, Sn. Google Assistant, Akom, Etc.
Power on
-Open the charging case.
Power off
– Close the charging case.
If you are In a call and another call comes
In -Double-tap the L/R earbud to accept the new call and hang up the current call; -Three tap the L/R earbud to keep the current call and reject the incoming call;
Charging
Charge before the first use, remove the insulation films, and put the earbuds back into the charging case.
Charging the earbuds
When low battery, the voice announcement will remind you to charge every 5 minutes. The case indicators will breathe slowly when the earbuds are properly but in charging case and being in charge. LED turns off on the case once the charging Is complete.
Charging the Charging Case
Charging the charging case, you can use the Type-C cable or wireless charger. When the case is in charge, the light on the case will breathe. The indicator light color indicates the battery level of the charging case. The light will turn off once the charging is complete.
70-100%…………………… Green Led
30-70%……………………. White Led
3-30%…………………… Red Led

Factory data reset

Try to reset as following instructions when two earbuds are unable to connect;

1. Take out the earbuds from the charging case, keep the L&R white light flash together for 5 minutes, and the earbuds turn off.
2. The L&R earbuds do the following operations in turn. Put the earbud into the charging case, dose the charging case, and open it again. The light of the earbud flash slowly. After double tapping the earbud, the light changes to flash giddy. Double-tap again, the light will always be on for one second, Factory data reset is complete. Take out the earbud to keep TWS pairing mode.
3. Then the L&R earbuds will TWS pairing successfully, the light lash will turn to flash slowly together. the earbuds turn to pair mode.

FAQ

1. How to change from Mono Mode to TWS Mode.
   a. When you just only use the right earbud, take out the left earbud from the charging case the music will come out from the left and right earbuds at the same time.
   b. When you just only use the left earbud, take out the right earbud from the charging case the music will come out from the left and right earbuds at the same time.

2. How to change from TWS Mode to Mono Mode.
   a. When you put your right earbud into the charging case, the left earbud will continue playing music.
   b . When you put your left earbud into the charging case, the right earbud will continue playing music.

3. The earbuds cannot reconnect to my device automatically. If your earbuds are connected to several devices before, they will reconnect automatically with the recently connected device.
   a.1f the L&R white light flash together, take out the earbuds from the case, please enter the phone’s Bluetooth menu, search for “SONG X” and connect It.
   b.lf the left and right white light always on, please check, maybe the earbuds are connected to another device automatically. And then, disconnect this connection, the R&L light will flash together, please search and connect it again, if all of this doesn’t work, restore the factory settings.

4. The left and right earbuds can’t pair with each other. Please put your earbuds into the charging case, and then take out them again. They will automatically pair with each other. If it doesn’t work, please restore it.

5. No sound from left/right earbud. Please put your earbuds into the charging case, and then take out them again. If still not solve this problem, please carry out restoring the factory settings(Page 7), and then put your earbuds into the charging case and then take out them again.

6. Can’t turn on my earbuds Please put them into the charging case and charge the case at the same time.

FCC Compliance Statement

FCC and IC Statement
This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two tonditions: (1)This device may not cause harmful interference, and(2)this device must accept any interference received, including interference that may cause „undesired operation. CAN ICES-3(B).
FCC/IC Radiation Exposure Statement
This equipment complies with FCCAJC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
FCC I D:2AW7B-SX06
Federal Communication Commission Interference Statement
equipment has been tested and found to comply with the limits for ass 8 digital device, pursuant to part 15 of the FCC Rules. These limits were redesigned to provide reasonable protection against harmful interference once in a residential installation. This equipment generates, uses and c adiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined ming the equipment off and on, the user is encouraged to try to correc interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
consult the dealer or an experienced radio/TV technician for help.
FCC Caution
any changes or modifications not expressly approved by the party set forth for an uncontrolled environment. Responsible for compliance could void the user’s authority to operate the equipment.
Important Safety
Information handle this earbud with care. They contain sensitive electronic components and batteries, which can be damaged or cause injury if dropped/dumped! punctured /crushed/disassembled, or exposed to excessive heat or liquid o not use damaged earbuds. Please follow the instructions:
Do not use this product near water.
Clean only with a dry cloth.
Only use accessories specified by the manufacturer.
Refer servicing qualified personnel.
CAUTION: Prevention of Hearing Loss
Permanent hearing loss may occur If earbuds are used at high volume for prolonged periods of time.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>