SANUS F32b Fixed Position Wall Mounts Instruction Manual

F32b INSTRUCTION MANUAL

F32b Fixed Position Wall Mounts

W e’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
1-888-333-9952. W e’re ready to help!

Scan for easy install video
san.us/254

http://san.us/254QR

IMPORT ANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE

Before getting started, let’s make sure this mount is perfect for you!

1. Does your T V weigh more than 80 lb (36.3 kg) including accessories?
   No — Perfect!
   Yes
   — This mount is NOT compatible. Visit MountFinder.Sanus.com or call 1-888-333-9952 (UK: 0800-056-2853) to fi nd a compatible mount.

2. What is your wall made of?
   | |
   ---|---|---
   Drywall with Perfect wood studs?| Solid concrete or Call 1-888-333-9952
   concrete block? (UK: 0800-056-2853)| Unsure?
   Call 1-888-333-9952
   (UK : 0800-056-2853)

3. Do you have all of the tools needed?

4. Ready to begin?
   Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.
   If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact Customer Service at 1-888-333-9952 (UK: 0800-056-2853).

CAUTION: Avoid potential personal injuries and property damage!

• This product s designed for use in wood stud, solid concrete, and concrete block walls – DO NOT install into drywall alone
• The wall must be capable of supporting five times the weight of the TV and mount combined .
• Do not use this product for any purpose not explicitly specified by manufacturer
• Manufacturer is not responsible for damage or injury caused by incorrect assembly or use

Dimensions

Parts and Hardware

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service.
Never use damaged parts!
NOTE: Not all hardware included will be used.
Parts and Hardware for STEP 1Parts and Hardware for STEP 2 Concrete Installation Kit CMK1 (NOT INCLUDED)
Contact Customer Service at 1-888-333-9952 to have these additional pieces shipped directly to you.

STEP 1 Attach Brackets to TV

1-1 Select TV Screw Diameter
Hand thread screws into the threaded inserts on the back of your TV to determine which screw diameter (M4, M5, M6, or M8 ) to use. 1-2 Select TV Screw Length
If your TV has a flat back AND you want your TV closer to the wall, use the shorter screws (a).
Use the spacers and longer screws (b) to accommodate:

• Round/irregular back TVs
• TVs with inset mounting holes
• Extra space needed for cables

Standard configurations are shown. For special applications, or if you are uncertain about your hardware selection, contact Customer Service at 1-888-333-9952.
CAUTION:
Verify adequate thread engagment with the screw or screw/spacer combination.

• Too short will not hold the TV.
• Too long will damage the TV.

1-3 Attach TV Brackets
Ensure that your brackets are level on the back of the TV . Standard confi gurations are shown. For special applications, or if you are unsure about your hardware selection, contact Customer Service.

IMPORTANT : After attaching the brackets, adjust the straps so they are level with the bottom of the TV .

STEP 2A Attach Wall Plate to Wall – Wood Stud Option

CAUTION: Avoid potential personal injuries and property damage!

• Drywall covering the wall must not exceed 5/8 in. (16 mm)
• Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3 ½ in. (38 x 89 mm)

1. Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.

2. Position the wall plate template 16 at your desired height and line up the holes with your stud center line. Level the template and tape in place.

3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove wall plate template 16.
   IMPORTANT : Be sure to drill into the center of the stud.
   IMPORTANT : Pilot holes must be drilled to a depth of 3 in. (75 mm).

4. Install wall plate assembly 17 and two washers  18 19. Tighten the lag bolts only until they are pulled firmly against the wall plate.
   CAUTION: Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts .

STEP 2B Attach Wall Plate to Wall – Solid Concrete or Concrete Block

Option

CAUTION: Avoid potential personal injuries and property damage!

• Mount the wall plate 17 directly onto the concrete surface
• Minimum solid concrete thickness: 8 in. (203 mm)
• Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
• Minimum horizontal space between the top two fasteners: 4 ¾ in. (120.6 mm)

Concrete Installation Kit CMK1 is not included
(see page 5) Contact Customer S ervice at 1 -888-333-9952 to have the additional hardw are shipped directly to you.

1. Position the wall plate template 16 on the wall at your desired height. Level the wall plate template and mark the hole locations.

2. Drill three pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
   IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Never drill into the mortar between blocks.

3. Remove the wall plate template 16 and insert three anchors (Fischer UX 10 x 60 – included in the Concrete Installation Kit * ).
   CAUTION: Be sure the anchors are seated flush with the concrete surface.

4. Install wall plate 17 using three lag bolts and three washers (use only the lag bolts and washers from the Concrete Installation Kit * ).
   Tighten the lag bolts only until the washers are pulled firmly against the wall plate.
   CAUTION: Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.

• Contact Customer Service at 1-888-333-9952 to have the Concrete Installation Kit shipped directly to you.

STEP 3 Attach TV to Wall Plate

HEAVY! You may need assistance with this step. IMPORTANT : You will hear an audible click when the TV bracket is securely fastened to the wall plate.

Adjustments

ADJUSTING THE LEVEL: If needed, tighten one of the screws on the top of the TV bracket to level the TV.
REMOVING THE TV: Pull down on the straps and lift the TV up and out away from the wall plate.

Thank you for choosing Sanus VuePoint! Please take a moment to let us know how we did:

Milestone AV Technologies and its affiiated corporations and subsidaries (collectively, “Milestone”),intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without natice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibiliy for accuracy, completeness or sufficiency of the information contained in this document.
©2014 Milestone AV Technologies. All rights reserved. Sanus is a division of Milestone.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

SANUS – 6436 City West Parkway * Eden Prairie, MN 55344 USA

Call us: 1-888-333-9952
UK: 0800 056 2853
Email us: info@sanus.com
Leave a review: vuepoint.sanus.com
Find us on Facebook: SANUS
Follow us on T witter @sanussystems
6902-002087 00

References

• SANUS | #1 Brand of TV Wall Mounts in the U.S.
• SANUS VuePoint F32b | Fixed-Position Wall Mounts | TV Mounts and Stands | Products | SANUS VuePoint
• SANUS VuePoint

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>