Bathworks Chip Repair Kit Instructions
- June 9, 2024
- Bathworks
Table of Contents
Tub, Tile, Wall Surround, & Sink
Refinishing Kit
CHIP REPAIR KIT INSTRUCTIONS
IMPORTANT:
Please read through the instructions carefully before using this product
Supplies Included
- Chip Filler
- Cream Hardener
- Applicator Brush
- Gloves
- Repair Paint (Optional)
- Sandpaper (120 grit)
- Alcohol Wipe
- Stir Stick
- Instructions (with Safety Warnings)
Chip Repair Application
STEP 1: Pick or Dremal® away loose matter from edges with sharpedged
utility knife.
STEP 2: Mix three (3) parts Chip Filler with one (1) part Cream Hardener.
Stir mixture well using stir stick.
NOTE: Patch must be used within 2 minutes. Patch will not respond to
surface temperatures under 65°F. Mix only what is needed, any remaining
product may be saved for later use.
STEP 3: Liberally apply patch compound to repair area with stir stick or
razor blade. Using a heat gun or blow dryer will speed dry times.
STEP 4: Once area has completed its cure, it should be hard to the touch.
Sand area, wet or dry, with sandpaper until flush with surrounding areas.
Repeat steps 2 & 3 if necessary.
Repair Paint Application
NOTE: If you are refinishing the full tub/sink and you have purchased one
of our Bathworks® Premium, Standard, or Sink Refinishing Kits, you will not
need to preform the following steps. You may now proceed with refinishing your
surfaces by following the instructions provided within your other kit.
Otherwise, proceed with the touch-up paint steps below.
STEP 1: Wipe the repair & surrounding area clean with provided alcohol
wipe.
STEP 2: Shake repair paint thoroughly. Carefully remove cap. Using
applicator brush, dip into paint container. Lightly stroke & feather edges.
Replace cap after use, and clean applicator brush with Xylene or similar
cleaning agent.
NOTE: Must dry 24 hours before use.
LIMITED WARRANTY
Tub Refinishing, Inc. DBA Munro Products as follows; this warranty is in lieu of all other written or unwritten, expressed, or implied warranties, and Tub Refinishing, Inc. DBA Munro Products expressly disclaims any warranty of merchantability or fitness for a particular purpose. The buyer assumes all risks whatsoever as to the use of the material. Keep away from children, animals, or persons that are sensitive to paint or fumes. Fumes can be harmful to humans and animals, and can also be flammable.
SAFETY
A protective respirator should be worn if available. Use product with adequate
ventilation. Always use rubber gloves. Tub Refinishing, Inc. DBA Munro
Products is not responsible for accidents or misuse of these products or parts
and materials of this kit. Safety is in the hands of the user. Keep all
refinishing kit materials and tools away from
children, animals, and individuals sensitive to paint or fumes. Some items in
this kit are flammable and should be disposed of properly in accordance to
local state, city, & town codes regulating used paint products. Use all paint
products with caution. DO NOT dispose of paint or clean tools by using water
and flushing down household drains – these are solvent-borne products and may
potentially damage pipes & the environment. Use Xylene or comparable cleaner
for cleaning tools & spills. Xylene is capable of permanently damaging
surfaces such as linoleum, plastic, wood, and previously painted surfaces.
Never use xylene on skin and use gloves & eyewear while using. If you are
unsure about the use or safety of this product, please return the unopened and
unused kits to the supplier. All returned goods are at the purchaser’s cost.
Opened or used materials will be refused for credit.
See all Safety Data Sheets (SDS) which are available via our website: bath-
works.net
SUITABILITY FOR USE
The user is responsible for establishing that these products are suitable for
the user’s application and that all requirements for meeting approvals,
standards, codes, disposal, use, and regulations of any kind are satisfied.
Distributor denies any responsibility for establishing suitability of use;
where, when, and how the materials from this kit are used.
Read all information and instruction before use of this product. Use caution.
FOR EMERGENCY: CHEMTREC®
1-800-424-9300
America’s #1 Choice in Bathroom Restoration For Over 50 Years!
“Like” us on facebook.com/munroproducts
Tub Refinishing, Inc. DBA Munro Products, and Bathworks®.
Bathworks® is an exclusive trademark of this company.
www.bath-works.net
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>