Yfw Technology YFWW006 3 in 1 Wireless Charging Stand Instruction Manual
- June 6, 2024
- YFW Technology
Table of Contents
Instnintinn Manual
Please read the instructions carefully first.in order to install the product correctly for quick use.
Product Introduction
1): Cable fixing silica gel
(2) : cable management
3) : type-c interface
4): Mobile Phone Wireless Charging Pad
5): Anti-slip removable rubber(washable for multiple times)
6) : indicator light
7) : Match charger fixed silica gel
Specifications
Product Name:3 in 1 wireless charging stand Product Material: Aluminum alloy,
Plastic, PCB.PE.Rubber
Input:5Vm3A / 9Vm2A
Frequency:115.205kHz
Conversation Efficiency:>7934(max)
Charging distance: C6mm
Power Interface: Type-C
Product Dimension:180’88’133mm
FCC ID:2AY3K-YFWW006
Applicable Mobile Phone Mode: Mobile phone with wireless charging function or
external wireless charging receiver
NOTE: Do not use Apple’s 5v/1A stock charger or a computer’s USB port to
power your wireless charger.
Cases made of metal, attachments such as magnets, cards, grips will interfere
with charging Quick charge 3.0 wall adapter required for fast charge mode
- Tum on the power and the blue light will be on for 1 s
- The blue light is always on when the mobile phone te charging normally
- The red light is flashing, and there are metal foreign matters on the charging board
This device complies with part 15 of the FCC Rules. Operation Is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions. may cause harmful interference to radio
communications. However, there Is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on. the user is
encouraged to try to correct the interference by one or more of the following
measures:
— Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver Is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received. Including interference
that may cause undesired operation.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of the device, a distance of 15
cm surrounding the device and 20 cm above the top surface of the device must
be respected.
Press the round head of the match charging cable Into the round groove
Get the USS head of the Match charging cable through the hole under the ‘watch
charging base
Push out the silica gel with your fingers from the bottom of the bottom shell.
and put the lightning through the hole shown in the figure
The airplanes Pro cable is placed In L larger silica get a hole and the silica
gel is inserted into the bracket
The AirPods cable is placed in a smaller silica gel hole and the silica gel is
Inserted into the bracket
Well Done
Install the USB line according to the diagram bull-In cord organizing space
can help you manage your long cable
Slide forward the bottom cover and fix II