Yfw Technology YFW-F156 Device User Manual
- June 5, 2024
- YFW Technology
Table of Contents
Yfw Technology YFW-F156 Device
PRODUCT OVERVIEW
Specifications
- Product Name:3 in 1 Charging Stand
- Product Material: Plastic. PCB, Rubber, Iron block
- Ipnut:9V2A/9V3A(Max)
- Output:9V2A for iPhone/5V = 1A for iWatch/5Vm1A for AirPods
- Frequency 325.4 Khz
- Power Interface Type C
- Charging Cable 1m USB Type-C cable
NOTE
Do not use Apple’s 5v/1A stock charger or a computer’s usb port to power your
charger. quick charge 3.0 wall adapter required for fast charge mode.
FCC Warning statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for Class B
digital devices, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequencyy energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the product and your body.
Declaration of Conformity
Hereby, Shenzhen Yongfengwang Technology Co., Ltd. declares that the product type 3 in 1 Wireless Charger is in compliance with following Directives: Radio Equipment Regulations 2017, Electrical Equipment (Safety) Regulations 2016 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the UK declaration of conformity is available at the following internet address https://www.hkkk.cn/
RF exposure statement:
This device was tested for uncontrolled environment operations. To comply with
RF exposure requirements, a minimum separation distance of 20cm must be
maintained between the user’s body and the product.
Radiated H-Field: -13.83dBuA/m@10m