BOLY BG710 Infrared Digital ScoutingCamera User Manual

: June 6, 2024
: BOLY

BOLY BG710 Infrared Digital ScoutingCamera User Manual

Getting Started

Product description

BG710 series camera, this is a digital infrared surveillance camera. Use 1.44″ color LCD display and 2*18650 battery (Buttontop, length:67~69mm), the USB port connects to the solar panel canchargethe18650 battery.

You can choose different models according to different needs.

BG710-M 4G Wireless Camera
BG710-MFP BG710-M Full Package mode, BG710-Mwith218650battery, 1 TF card and 1 * TF card adapter

Camera Operations

Batteries / Power Supply

Battery
The camera is powered by 2*18650 batteries. (Button top,18650 battery, length: 67~69mm)
External power supply
It is also possible to power the device or charge the 18650batteryinthe device via an external USB power supply adapter(5V/2A)or solar panel. (External power supply not included)
- Charging by USB power supply
- Charging by solar panel

USB port function:（Auto detected by Camera）

Power charging
In this mode, USB will charge the camera’s 18650 battery.
Mass Storage
In this mode, the camera will act as a storage device. You can read or copy the photos or videos in the TF card.

TF Card Information

This camera uses a TF card, to take full advantage of the latest technologies, we recommend Class 10 TF cards or better, which have fast transfer speeds and long durability for extensive shooting in the most extreme outdoor conditions.

Insert the TF card into the camera before turning on the camera
This camera supports up to a 32GB capacity TF card and has no built-in internal memory. The camera will not function without the TF card properly inserted into the camera.
Do not remove the TF card while the camera is on
Removing the TF card while the camera is on risks damaging the internal components of the camera.
If you experience any problems with an inserted TF card
Try reformatting the TF card by using the camera’s main settings option.

SIM Card Information

This function is only available with communication function models. Insert the SIM card into the camera before turning on the camera

The camera SIM card slot is sized for a standard SIM card. If you have a nano or micro size SIM card, utilizing a SIM card adapter (included with most of our cameras) will be required to connect your camera to the cellular network via SIM card.

Supported Wireless Carrier Bands:

GSM: B3/B8
WCDMA: B1/B8
LTE FDD:B1/B3/B7/B8/B20/B28A

NOTE: The camera will still function without a SIM card. The SIM card is needed only for the wireless/cellular messaging capabilities.

Camera Modes

The different modes are accessed by pressing the OK button, marked on the camera.

OFF Mode
To turn off the camera when the display screen is active, press and hold the OK button until the screen powers off. The camera will still consume a small amount of battery power while in OFF mode. Were commend removing the batteries if the camera will not be used for a long period of time.
SETUP Mode [Test Mode]
To turn on the camera, press and hold the OK button until the display screen activates, In this mode, you can customize the camera settings or play back pictures and videos the camera has taken on the LCD display. After switching the camera to the ON position and if the camera is left alone for more than 180 seconds, the camera will automatically switch to Hunting Mode, as described below.
On [Hunting Mode]
In order to enter the on mode, you can press and hold the ▼/Down button for about 4 seconds. Before entering Hunting Mode, the front (red) LED light will continuously blink for approximately 10 seconds and then turn off. This preset time allows you to adjust the camera’s position if needed before the camera becomes active. The camera will take pictures or videos when motion is detected and/or at specific time intervals, according to the programmed settings.

Manage Images and/or Videos

Place the camera in TEST/SETUP mode and press the POWER button to view images or videos, the latest image or video will be shown on the LCD screen. Press the ▲/Up or ▼/Down buttons to cycle through the pictures and videos were taken.

NOTE: Video cannot be viewed directly on the camera

Sending via MMS/GPRS/Molnus/FTP

This function is only available with communication function models.

Images can be sent directly to your wireless device/email/Molnus, based on the Send Mode settings.

Insert the TF & SIM card into the camera before turning on the camera.
Turn on the camera in TEST/SETUP mode. Make sure the SIM card is recognized, and signal strength is adequate.
Indicates the camera recognizes the SIM card.
Indicates the camera or the SIM card do not recognize the SIM card is not working due to connection/activation issues.
Select the send mode setting and fill in the correct parameters. You have the options of Molnus (default setting), MMS, Email , or FTP. Videos will be sent in less than 20M.
Press “Power” to view the photos stored on the camera.
Find the picture you want to send manually.
Press the MENU button to pull up the Send To option.
Press “OK” to send the picture via the messaging option chosen in your camera settings.

Password Setup

For encryption settings, enter your four-digit pre-set password to enter the camera. This function helps protect your privacy.

This function is off by default. To use this function:

Press ▲/▼ to adjust the number from0~9, and /►to change the password
The same password must be entered twice to take effect.
After the password is set up, you will be required to enter the same password on the next boot to enter the camera.

If you forgot your password, please contact us for assistance.

Camera Setup Settings & Display

Settings Interface & Display

To update the camera settings, turn the camera on to activate the display screen.

OK/Power: Switch on and off, save parameter settings, enter or exit playback mode
Menu: Enter or exit Menu
▲/Up: Setting items switching
▼/Down: options parameter switching, manually take a photo or record a video, enter the ON mode

When the camera is in the ON Mode, the screen will activate and display the following:
Settings Interface & Display

Indicates the camera recognizes the SIMcard.
Indicates the camera or the SIMcard do not recognize the SIM card is not working due to connection/activation issues.

Note: SIM card/Signal strength/Telecom provider only appear in models with a communication function.

Wireless Model Setup

The features described in this section only support communication models.

Mobile Communication

The camera can receive and respond to commands sent via SMS ,Molnus and the Apple or Android application, as long as the camera is correctly connected to a wireless carrier. To enable the SMS functionality using the mobile application, you must complete the following steps:

Place the camera in Test/Setup Mode and go into the menu Setup options
Set SMS control to ON

For MMS/Email/Molnus/FTP functionality, the following menu Setup options will need to be set:

MMS network settings (varies depending on carrier)
Email network settings (varies depending on carrier)
FTP network settings (varies depending on carrier)
Molnus (varies depending on carrier)

Setup Software of PC

Download the camera setup application (BMC_config.zip), from our website: www.bolymedia.com/index/Support,connect Camera to Computer with the USB cable, open the software and select camera model.
Setup Software of PC

STEP 1 > Select your country and carrier.
STEP 2 > Check WAP/Internet Parameters. Fill out the required fields (marked with an asterisk), enter an Email server such as “smtp.gmail.com” or “smtp.bolymedia.com.”
STEP 3 > Choose between default or manual settings. For first time users, we suggest using the default settings.
STEP 4 > Enter the phone number of the phone to receive/send the remote commands and images in the “administrator number” field and email address in the “Receive Email 1” field (This is NOT the phone number of the inserted SIM card that resides in the camera).
STEP 5 > Save the .txt file in the GSM folder of the TF card after all settings are complete. The program names the .txt file. The txt file must be loaded into the specific camera’s GSM folder.

If your country or SIM card provider is not listed, select “Others.”

You will need to ask the SIM card provider for their specific MMSURL, MMS APN, Port, MMS IP, Account, Password, GPRSAPN,GPRS account, GPRS password. For sending emails, your email service provider will be able to provide the send email server and port settings.

Setup for Mobile applications

When the camera is switched to the ON mode, you can change some of the basic camera settings on the mobile application. There are currently apps supported by Android and Apple devices. Charges or fees may apply when sending text messages to the camera depending on your cellular provider.

For Android, you can search BG Tools from the Google store or download the application directly from our website, under the Downloads section: http://www.bolymedia.com/index/Support
For Apple, search BG Tools in the official Apple Apps store.

BG Tools Usage Instructions for Android App

The Android APP makes it easy to communicate with the camera, so you don’t need to edit the SMS.

STEP 1: Open the BG Tools app and click on the icon to add a new device.
STEP 2:

1. Input the model of your camera
2. Input your SIM card number which is inserted in your camera
3. Select your camera model number, then click “Add” to finalize.

BG Tools Usage Instructions

STEP 3: Click “send,” then choose the country and provider that corresponds with your SIM card (which is inserted in your camera). After that, choose “Check WAP/Internet Parameters” to check whether you have all the required parameters filled in. The “Username and User Password” is your MMS name and password.
STEP 4: In the Select Mail Server: you can decide on using a Boly Email or Other Email service. Select “my device” to add or delete a device.
STEP 5: Select “Setting” to set the user’s parameters or set to default.
STEP 6: Select “Get Photos” means you can get a photo from your camera device. There are two ways to send an image via: Cellphone: Send MMS to the phone. Email: Send an email by GPRS.

Set password:

If you forget your password, you can get a new one.

Add or Delete a device:

Android
Select “My Device” to add a device, a long click on the device to select the delete option. IOS

Click“ ” to add a device and choose your device, or slide to the left to delete it.

Cloud Service – Molnus

Molnus is a cloud service that allows users to access to transfer and store images taken through the cameras with the use of compatible devices or a computer.

To get started, you need to supply the camera with batteries and a SIM-card that has internet access.

You also need to have the phone number and the APN name to the SIM-card you will use for the camera.

The operator of the SIM card provides the APN name. Each operator has its own APN name. If not present in any documents sent along with the SIM-card, then please check the operator’ show me page for APN settings.

IMEI, Control Code can be found on your camera. You will need a SIM-card that has internet access. Start the camera in SETUP mode, look for the operator ’ s name in camera display, then check the Version.
Cloud Service

Step1 Register your Molnus account. (In Molnus)
Step2 Log in to your Molnus account and go to the My Cameras page. (In Molnus)
Step3 Power on the camera, into SETUP Mode, and set Send mode is “Molnus.”(On camera)
Step4 Press the Register camera button to register your camera. (In Molnus)
Step5 Press the Register button in Molnus, and wait for about5minutes. (In Molnus)

The registration should now be done, and the camera should now be able to upload images to Molnus.

If you would like to use Molnus on your smartphone, please download the app on Google Play or Apple App Store. For more details please check on the website: https://www.molnus.com/

Camera Setup Options

To view the camera settings menu, press OK to power on the camera. When the screen is active, press MENU to enter into the menu settings. Use the ▲ /Up key to select the different items, use▼/Down key to select the different options. Press OK to save the setting and press MENU to exit the camera settings menu.

Note: After changing EACH setting in the Setup menu, you must press OK, or the camera will not save new settings.

Main Options	Descriptions
Language	Language options include: English, Czech, German, French,

Spanish, Swedish, Finnish, Norsk, Dansk, Italian, Russian.

Default: English

Camera Mode| There are three camera modes:

Photo: to take a photo

Video: to record a video

Picture + Video: to take a picture with a video clip. This mode disables the photo burst function.

Default: Photo

Set Clock| Set the date and time of the camera. The date format is day/month/year and the time format is hour: minute: second.
Photo Size| Choose the image size:24MP,18 MP ,12 MP ,5 MP

Default: 5 MP

Photo Burst| Choose the number of photos taken after the camera is triggered: 1 Photo, 2 Photo, or 3 Photo. If Pic+Video is selected, Photo burst defaults to 1 photo regardless of the entered value.

Default: 1 Photo

Video Size| Choose the video size: 1080Por 720P.

Default: VGA

Video Length| Choose the duration of the video recording. Valid values extend from 5-60 seconds in 5 second increments.

Default: 10 seconds

Time Lapse| The camera can capture images or videos at a preset time interval regardless of motion detection. Changing this setting to a non-zero value turns on Time Lapse mode, and the camera will take photos at the set interval time. If PIR Trigger/Sensitivity and Time Lapse options are BOTH OFF, the camera will not capture any photos or videos.

Default: Off

PIR Trigger/Sensitivity| This setting is for the sensitivity of the PIR sensor. There are four sensitivity parameters: High, Normal, Low, and Off. It is recommended to use HIGH sensitivity in areas with little environmental interference and warmer, humid climates. Use LOW sensitivity for areas that have a lot of interference. The sensitivity of the PIR is affected by temperature. Higher temperatures lead to lower sensitivity.

If PIR Trigger/Sensitivity and Time Lapse options are BOTH OFF, the camera will not capture any photos or videos.

Default: Normal

PIR Interval| This setting indicates how long the PIR sensor will be disabled after each camera triggering. During this time the PIR sensor will not react to any detected motion. The PIR Interval can be set between zero seconds to a maximum of 1 hour.

Default: 10 seconds

Work Day| Choose the days of the week you want the camera to work. This setting is only available in Hunting Mode.
**| Default: All
Work Hour**| This parameter defines a certain time in a day when the camera can be triggered, while the device will shut off during non-working hours. The effective value ranges from 00:00 to 23:59.

When this parameter is set to Off, the camera works at all times. When the timer switch is ON, the camera works only during the time according to the preset settings.

Default: Off

Camera Position| Used for multiple cameras in an area. You can set an A-Z indicator for each of your cameras to distinguish between which photos are from a specific camera.

Default: Off

Recycle Storage| In hunting mode, if the TF card is full, the oldest images or videos will be overwritten by new pictures or videos. This keeps you from having to retrieve your memory card manually. In SETUP mode, this option is disabled.

Default: Off

Send To| Send the image to your phone or email options.

MMS: Send the image to the cellular device via WAP.
Email: Send the image to an email address via SMTP.
Molnus: Send the image/video to Molnus via network.
FTP: Send the image to FTP address via network.

Default: Molnus

Send Mode| There are 3 options for this setting.

Daily: Only works in ON mode.

Photo Mode: This setting will send summarized information, and the last picture was taken at the end of the time you had set.

Video Mode: The summarized information will include how many videos were taken and the last video taken at the end of the time you had set (less than 10M).

Pic+Video Mode: The summarized information will include how many videos and pictures were taken and the last picture taken at the end of the time you have set.

Instant: Only works in ON mode. The camera will send a message instantly after it captures a photo or video.
OFF: Disables all communication functions.

****| NOTE: Some cellular carriers limit the size of files being sent. Some images and video files may be too large to send.

Default: Instant

SMS Control| SMS Control enables mobile communication functionality. When SMS Control to ON, the camera can receive and respond to your SMS commands.

Default: Off

SIM Set| When this function is turned auto, the camera automatically recognizes the carrier after booting and automatically configures communication parameters, such as MMS_URL, MMS_APN, MMS_IP, MMS_PORT, MMS_ACCOUNT, MMS_PASSWORD, GPRS_APN, GPRS_ACCOUNT, GPRS_PASSWORD.

When you select manual option, you can input parameters by manual.

Default: Auto

Note: When this function is turned auto, the first boot time will be about 2min or later.

Select network| You can lock network, there are 2G,3G,4G option. If you select 2G, camera will send picture through 2G network.

Default: Auto

Attachment Size| Setting the picture size which will be sent to your phone or email. There are 3 options for this setting.

Low: Sends a severely compressed picture.

Normal: Sends a slightly compressed picture.

*High: Sends the original pictures.

Default: Low

Password Set| Enter your four digits password to enter your camera when powering it on.

Default: Off

Time Stamp| When this function is turned on,the camera can print time and Logo on video.

Default: ON

Format SD| All information on the TF card will be deleted. Make sure to make a backup of important data already on the TF card.
Default Settings| Restores all settings back to default values.
Version| Shows firmware Version.
Register Camera| Used only for the Molnus app to register the camera.

Troubleshooting

The display screen is suddenly black.
A: The camera may be in “Hunting mode.” Press MENU to wake it up. If there is no response, the camera may be powered off. Please check if the batteries are still good and in place. Once battery power and placement is verified, press and hold down the OK/POWER button until the display turns on, indicating the camera powering up.
Why my phone can’t receive MMS?
A: MMS/GPRS function needs the SIM cards in both your camera and phone to have enough balance and to be opened to data exchange.

PIR Detection Zone

This camera has a new patented PIR, the following picture shows the compared detection zone between normal PIR and the new patented PIR.
PIR Detection Zone

The PIR detection angle (α) is smaller than the field of view(FOV)angle (β). The advantage of this design is to reduce empty an empty picture’s rate and capture most, if not all, objects in motion.
PIR Detection Zone

Technical Specifications

Image Sensor	5MP CMOS Sensor
Lens	F/NO=2.4

FOV(Field of View)=57°

Dimensions

| BG710:1158145 mm

Solar Panel:748930mm or 17912613mm

Operation Humidity| 5% – 90%
Security Authentication| FCC, CE, RoHS

Parts List

BG710-M/BG710-MFP

Part Name	Quantity
Camera	One
Belt	One
USB Cable	One
User Manual	One
4G Antenna	One
18650 Battery (BG710-MFP with)	Two
TF Card (BG710-MFP with)	One
TF Card Adapter (BG710-MFP with)	One
Iron Sheets	One

WARRANTYCARD

Customer Name:_____
Contact Address:_____
Date of Purchase:_____
Contact Tel:__
Model No.:__
Series No.:___
Retailer:_____

The camera manufacturer provides 12 months warranty for this product against manufacturing defects or malfunctions. If your camera fails to function under regular use within one year, the camera manufacturer will repair or replace the camera free of charge. This warranty does not cover improper use of the camera resulting in damage. The camera manufacturer can provide extra service for your camera after the warranty expiration, but the customer has to be responsible for additional charges on parts, labor and shipping costs therefore brought.

Please contact your reseller for warranty service

BOLY LOGO