PIDZOOM FH30 Finger Horn FH30 for EUC Onewheel Skateboard Riders User Manual
- June 16, 2024
- PIDZOOM
Table of Contents
PIDZOOM FH30 Finger Horn FH30 for EUC Onewheel Skateboard Riders
MAIN FEATURES
Note : Ensure charging the main unit to activate the remote control prior to its initial use.
COMPONENTS
SPECIFICATIONS
MAIN UNIT MOUNTING
Two installation options
Option 1 : Main unit attached with reusable fastener.
Option 2: Fasten the bracket with ties and secure the main unit with the screw
REMOTE CONTROL AND GENERAL OPERATION
Disarm & Setting mode (hold for 4s)
Hom & 4 Ringtone options
Anm & Volume Adjustment
Hom
In the disarmed state, short press the alarm button to trigger the
previously set ringtone. Short press for short ringtone, long press for long
ringtone.
Motion Alarm
Arm : Press the arm button on the remote to activate the motion alarm
function. The main unit will respond with a “do-Re-Mi” melody and confirm the
armed status with a beep after three seconds. If the device detects motion on
the vehicle, it will emit a warning sound. Afr/ subsequent motion will trigger
a 30-second duration alarm.
Disann : Press the disarm button on the remote to deactivate the motion
alarm function. The main unit will acknowledge with a “Mi-Re-Do” melody.
Customization Setup
- To enter setting mode, press and hold the disarm button on the remote for four seconds. The central button’s LED will illuminate to confirm successful entry.
- Toggle between ringtone types by pressing the central button.
- Adjust the ringtone volume by pressing the arm button.
- Save your settings by pressing the disarm button. A beep will confirm a successful setup
CHARGING PROCESS
- As the battery level decreases on the main unit, the indicators gradually turn off until fully depleted.
- To initiate charging, connect the USB-C cable. As the battery level increases, the number of indicators will illuminate accordingly. Once 2-3 hours have elapsed, the third indicator LED will remain steady, confirming that the battery is fully charged.
Low Battery Indications
- Only one power indicator remains lit.
- A “Biu-” sound accompanies the standard beep when pressing the remotE”s buttons.
- A decrease in control range or responsiveness is associated with a low battery. If you notice any of these signs, charge the main unit
MAIN UNIT IND REMOTE PAIRING
- While in normal or disarm status, press and hold the main unit’s button until you hear a “beep;’ then release it
- Press any button on the remote. The main unit will beep twice to indicate a successful pairing.
- To erase the list of paired remotes, while in normal or disarm status, press and hold the main unit’s button for about 7 seconds until you hear a long “beep” sound, confirming the unpairing process.
Note : A single main unit can pair with up to three remotes.
WARNING&NOTICES
- To prevent hearing damage, refrain from placing the main unit close to your ears.
- After charging, make sure to securely close the charging port.
- The ultimate interpretation of this manual lies with our company. Please contact us in case of any doubt
WARRANTY
This product is covered by a one-year warranty from the date of purchase
against manufacturing defects. Please retain the proof of purchase document
and contact us if you have any doubtwww.pidzoom.com
FAQ
Why is the motion alarm not responsive?
After arming the motion alarm, wait for the beep (about 3 seconds) before touching or moving your vehicle. This confirms it's fully armed.
Why is the main unit no longer responsive to the remote control?
Ensure adequate power for both the main unit and the remote. Charge the main unit or replace the remote' s battery.
What's preventing my device from charging or causing it to charge slowly?
Use the provided charging cable and ensure proper insertion into the USB port. Charging starts when the power indicator is active.
When is it time to charge the battery, and how to know the power is low?
Can I buy additional remote controls?
Yes, each main unit can be paired with up to three remote controls and used simultaneously.
What to do in the event of a lost remote control?
Is it necessary to re-pair the devices after replacing the remote's battery?
No, it's not necessary.
can I use the main unit while roller skating?
Yes, you can wear the main unit by attaching its bracket to your pants' belt or backpack straps.