Guangdong Meizhi Compressor MZNA21 Smart Kit User Manual

Guangdong

USER MANUAL OF SMART KIT

IMPORTANT NOTE:
Read the manual carefully before connecting your Smart kit(Wireless module). Make sure to save this manual for future reference.

DECLARATION OF CONFORMITY
Hereby, we declare that this dehumidifier is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
A copy of the full DoC is attached.

SPECIFICATION

Model: EU-OSK105/US-OSK105
Standard: IEEE 802. 11b/g/n
Antenna Type: Printed PCB Antenna
Frequency: WLAN 2400~2483.5 MHz
Operation Temperature:0 C~45 C/32 F~113 F
Operation Humidity: 10%~85%
Power Input: DC 5V/300mA
Maximum TX Power: ＜20dBm

PRECAUTIONS

• Applicable system: iOS, Android.
  Please keep your APP up to date with the latest version.
  Due to the special situations that may occur, we explicitly claim below: Not all of the Android and iOS system ible is compatible with APP. We will not be respons for any issue as a result of the incompatibility.

• W wireless safety strategy Smart kit only supports WPA-PSK/WPA2-PSK encryption and no encryption.
  WPA-PSK/WPA2-PSK encryption is recommended.

• Cautions
  Due to different network situations, control proc y not may return time-out sometimes. If this situation occurs, the display between the board and App ma ls or be the same,  please do not feel confused.
  Smart Phone camera needs to be 5 million pixels above to make sure scan QR code well.
  Due to different network situations, sometimes, request time-out could happen, thus, it is necessary to do network configuration again.
  The APP system is subject to update without prior notice for product function improvement. The actual network configuration process may be slightly different from the manual, the actual process shall prevail.
  Please Check The Service Website For More information.

DOWNLOAD AND INSTALL THE APP

CAUTION: The following QR Code is only available for downloading the APP. It is totally different from the QR code packed with units.

| | Android
https://play.google.com/store/apps/details?id=com.midea.aircondition| iOS
https://itunes.apple.com/us/app/nethome- plus/id1008001920?l=zh&ls=1&mt=8
---|---

• Android Phone users: scan Android QR code or go to google play, search the ‘NetHome Plus” app and download it.
• iOS users: scan iOS QR code or go to APP Store, search ‘NetHome Plus” app and download it.

USER REGISTRATION

Please ensure your mobile device is connected to a Wireless router. Also, the Wireless router has already connected to the Internet before doing user registration and network configuration.
It is better to log in to your email box and active your registration account by clicking the link in case you forget the password. You can log in with third-party accounts.

1. Click ” ” Sign up| 2. Enter your email address and password, and then click ” Registration “

 NETWORK CONFIGURATION

Cautions

• It is necessary to forget any other around the network and make sure the Android or IOS device just connects to the Wireless network you want to configure.
• Make sure the Android or IOS device Wireless function works well and can be connected back to your original Wireless network automatically.

Kindly reminder:
The user must finish all the steps in 8 minutes after powering on the dehumidifier, otherwise, you need to power on it again.

Using Android or iOS device to do network configuration

1. Make sure your mobile device has already been connecting to the Wireless network which you want to use and active the Bluetooth system. Also, you need to forget another irrelevant Wireless network in case it influences your configuration process.
2. Activate the AP mode (The pictures in the manual are for explanation purposes only. Your machine may be slightly different. Please read the WIRELESS MODE IN OWNER’S  MANUAL for detailed operations.).

3 Press “ + Add Device ”| 4. Press “Scan for nearby devices”

5. Wait for smart devices to find, then click to add it| 6. Select home Wi- Fi, enter the password

7. Wait connecting to the network

8. Configuration Success, you can see the device on the list, you can also custom the device name.
NOTE: If the Bluetooth connection is a failure, please select the appliance type of Dehumidifier to do the network configuration.

9. Follow the above steps to enter “AP” mode.

10. Choose the network configuration method.| 11. Choose the “ Scan the QR code ” method.

NOTE: Steps 10 and 11 are applicable to the Android system only.

12. Or choose the “Manual Setup” method.| 13. Please enter password

14. Network configuration is successful

NOTE:

• When finishing network configuration, APP will display success cue words on the screen.
• Due to a different internet environment, it is possible that the device status still displays “offline”. If this situation occurs, it is necessary to pull and refresh the device list on the APP and make sure the device status becomes “online”. Alternatively, the user can turn off the AC power and turn on it again, the device status will become “online” after a few minutes.

13. Configuration Success, you can see the device on the list.

HOW TO USE APP

Please ensure both your mobile device and dehumidifier are connected to the Internet before using the app to control the dehumidifier via the internet, please follow the next steps:

1. Click ” Login ” cc| 2. Choose the dehumidifier.

3. Make sure the Bucket is not removed and place it in the right position.

From left to the right, these button means Power, Fan, Continuous, Auto Dehumidification, and Pump.

1. Power
   Press to turn on/off the humidifier.

2. Fan mode
   Press Fan icon to activate high, med(on some models), low fan speed.

3. Continuous mode
   Press the Continuous icon to activate. Press again to deactivate.

4. Auto dehumidification mode(on some models)
   Press the auto dehumidification icon to activate. Press again to deactivate.

5. Pump mode(on some models)
   Press the Pump icon to activate. Press again to deactivate.

6. Humidity control.
   The range of humidity is 35%RH-85%RH. Users can add humidity by clockwise adjusting the white pointer. Similarly, the user can minus humidity by anticlockwise adjusting the white pointer. The yellow pointer means current indoor humidity.

NOTE:
Not all the function of the APP is available on the dehumidifier please check the user manual to find more information.

 SPECIAL FUNC TIONS

Schedules

• Weekly, users can make an appointment to turn on or off the dehumidifier at a specific time.

Share Device
The dehumidifier can be controlled by multi-users.

1. Click ” Share device “| 2 Let the others scan the displayed QR code.

3. Click ” Add Share Device “| 4. Add the shared device.

FCC ID:2AS2HMZNA21
IC:24951-MZNA21
This device complies with Part 15 of the FCC Rules and it contains license- exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development  Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1.  This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Only operate the device in accordance with the instructions supplied.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the radio frequency exposure limits,  human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

The company will not be liable for any issues and problems caused by the Internet, Wireless Router, and Smart Devices. Please contact the original provider to get further help.

NOTE:
All the illustrations in the manual are for explanation purposes only. Your unit may be slightly different.
The actual shape shall prevail.

CD001IU-APWIFI(OEM)
XXXXXXXXX
20210401

Documents / Resources

| Guangdong Meizhi Compressor MZNA21 Smart Kit [pdf] User Manual
MZNA21, 2AS2HMZNA21, MZNA21 Smart Kit, MZNA21, Smart Kit
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>