inFace CF05ES Lite Visual Blackhead Remover User Manual

inFace CF05ES Lite Visual Blackhead Remover

Welcome to Use in face

inFace Visual Blackhead Remover (Lite) is independently developed and manufactured by Shenzhen in Face Technology Co., Ltd., which is affiliated to Shenzhen Migoosmart Co., Ltd .. Since the company was founded, it has been designed the core concepts of practicality, functionality and safety, aiming to create products with technology and intellectual, and striving to explore and innovate.
inFace Visual Blackhead Remover (Lite)

Functions of t he Product I
Removing Blackheads and Acne I Removing Oil and Exfoliating l Cleaning Pores I Blue Light AntHnflammatory

Precautions!

Please read and follow the following safety guidelines·

1. This product is not waterproof, please do not soak the product in any form of liquid.
2.  Keep the product away from bathtub, shower basin, washbasin or other water-containing utensils, and keep the product and the power adapter dry.
3.  Dry your hands to prevent water or other liquids from entering the product and damagingthe product.
4. Do not overuse it on the same area of the face, otherwise, it may cause the skin to become red, purple and swollen. It is  recommended that the detention lime in the same area during use should not exceed 3 seconds, and each treatment time should not exceed S minutes.
5.  Do not use on delicate skin areas, such as the chin, corners of the mouth and around the eyes.
6. Do not use this product on skin with open wounds, acne or pimples
7. Do not use it on cuts, areas that have undergone cosmetic surgery, skin inflammation, itching and redness.
8. If you feel unwell during use, please stop using it immediately
9. After a long time of continuous use, if the body appears heating phenomenon, it is not a product failure, please rest assured to use it.
10. After using the product, the skin may appear reddish condition, which is a normal phenomenon, generally within l hour, the redness will self- fade.
11. Do not look directly at the running LED light at close range.
12. Do not allow children to use this product, please place this product out of the reach of children.
13. lf the product is damaged, please stop using it
14. you have any skin problems, please consult a doctor before using this product.

FCC Warning

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions,
(1) This device may not cause harmful interference, and
(2] this device must accept any interference received, including interference that may cause undesired operation.
Note , This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following  measures.

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Product Details

Open the box and you will see

1. in Face Visual Blackhead Remover (Lite) x1
2. Suction Nozzlex4
3. Silicone o Ringx2
4. Dust Netx2
5. USB Charging Cable xl
6. User Manual and Warranty Card Ml
   (If one or more of the above accessories is missing, please contact our after- sales customer service center. )

Small Suction Nozzle: Specially care for stubborn blackheads Middle Suction Nozzle: Small suction, suitable forsmall parts of the elliptical hole suction head which is not easy to be fitted Silicone Suction Nozzle: Gentle care and sensitive skin care specifically for the face Oval Suction Nozzle: Strong suction, suitable for facial T zone

Note: The product pictures and the description of the relevant features shown in this manual, as well as the explanations of some nouns, can only be used as a reference, the users shall base on the actual object. In view of the consistent policy of continuously improving in Face products, we reserve the right to change the specifications of products without further notice.

Product Parameters

Product Name: inFaceVisual Blackhead Remover (Lite)

• Model : CF-OSES
• Product Size: 140.5*315″31.Smm
• Net Weight About 100g
• Battery Capacity : 800mAh
• Charging lnput : 5V~ 1A
• Rated Voltage :3.7V~
• Rated Power: 3.6W
• StandbyCurrent: About30uA
• Charging Mode; LISB DCS\/
• Charging Current : 600mA
• charging time: About2 hours
• Continuous Working Time: About 60 mins
• Working Temperature Range : O”C-4 0″C

instructions

1. Long press the ” ON / OFF (Function Switch) Button ” for 1.5 seconds to turn on the device. The default mode is Level· I in “cleaning mode,” the corresponding indicator always lights “
2. ln the power-on state, short press the ” ON / OFF (Function Switch) Button ” to switch between “cleaning mode” (levell – level3) and “blue light mode”, and the corresponding indicator always lights on.
3. ln the “blue light mode”, the blue LED at the top of the device lights up.
4.  ln the “clean mode” (level! – level3) state, the device will automatically enter the “blue light mode” after5 minutes of continuous work, and then the device will automatically shut down afters minutes olcontinuousworkin the “blue light mode”.
5. ln any working state, long-press the ” ON /OFF (Function Switch) Button ” for l.S seconds, the device will shut down
6.  When the battery voltage is lower than 3.4V, the low battery red indicator flashes for 90 seconds and automatically shuts down.
7.  When charging, the three white indicators (LEDs / LED2 / LED3) turn on in tum, and the three white indicators (LEDl/ LED2 / LED3) are always on after fully charged.
8.  Do not use when charging, the key operation is invalid.

Operations

1. .Download and install the APP (see APP download and install steps for details);
2. Connect the device with the APP (see APP function description for details);
3. Please clean the face before using, apply a hot towel to compress or use a facial steamer to heat the face for five minutes to help open the pores, and then apply a blackhead export nasal mask to soften the blackheads and acne;
4. Please select the suitable suction nozzle and install it on the top ofthe device, and test the suction force on the palm or forearm before using;
5. .When using, you can select a suitable level according to your skin condition by pressing” ON I OFF (Function Switch) Button “;
6. When using, make sure that the suction head is close to the skin, and there should be no gaps, otherwise vacuum negative pressure will not be formed, and the blackheads will not be effectively sucked out;
7. Keep moving when using the device, and the detention time in the same area during use should not exceed 3 seconds, and each treatment time should not exceed 5 minutes.
8. .After cleaning, the device will automatically enter the “blue light mode” for skin care;
9. .The device will automatically shut down after the “blue light mode” care is over (in any working state, you can long press “ON /OFF( Function Switch I Button ” for l.Ssecondsto shut down);
10. .Facial cleaning care is recommended once a week, the specific frequency of use must be adjusted according to their own skin conditions.

[APP Download and Install]

Use your mobile phone browser to scan the QR code in the manual, then dick download and install it ( if usingwechat to scan, manually jump to the browser to open ) .

[APP Function Description]

Connecting to the camera of the device through APP makes it more intuitive and convenient to clean pores during use.

1. Turn on the device and enter level·l deaning mode, then click on the phone WiFi setting page to select the corresponding WiFi name (such as inFace· JUOO<) to connect the device.
2. .0pen the ” LID LI ” APP and go to the home page. If the device is not connected, the APP will prompt for operation instructions.
3. After clicking ” Turn on “,you can see the image transmitted by the device camera in the APP interlace.
4. During using, the working position of the blackhead meter can be adjusted a pproprlately according to the condition of he displayed facial skin.
5. After clicking ” Video ·, the Images transmitted by the device camera can be saved to the mobile phone as a video.
6. After clicking ” Photo “, the image transmitted by the camera of the device can be saved to the mobile phone as a photo.
7. After using it, Just dose the APP in the background of the phone.

Charging Instructions

Please fully charge the device before using it for the first time.

1. Please use a standard qualified DCSV/lA adapter for charging.
2. During the charging process, the three-level indicators flash in turn.
3. After being fully charged, the three-level indicators are always on.
4. When the battery is low, the red indicator will flash slowly for 90 seconds. Please use it after fully charged. 0 Connecting to the power supply, if charging is not started after 10 seconds, please confirn, whether the Type-C cable is
   connected badly or whether the power supply is normal.

cleaning and Maintenance

1. When cleaning, make sure that the device is turned off and cannot be washed with water to avoid electric shock.
2. When cleaning the suction nozzle, please remove the suction nozzle from the device and rinse it with warm water.
3. The device is not waterproof, after each use can be used wet tissue or wet cloth wipe clean fuselage, prohibit the use of corrosive solution wipe or wash with water.
4. .Device camera lens with a cotton swab for cleaning, do not touch the lens with a hard object to avoid scratching the Lens.
5. Please store the device in the normal drying room.

Do not strongly impact, knock ordropthedevicePlease do not disassemble or repair this device by yourself. For maintenance matters, please contact the after.,;ales service provider ofthe device.

• Q: Why can’ t the blackheads be extracted?
  A: © In nonnal cases, pores are kept shut. Before using the device, it is recommended to apply hot compress or use the facial steamer to open the pores, and then use the blackhead export fluid to soften and simply export the blackheads. ® Use an appropriate suction nozzle and select the appropriate suction level based on the skin conditions. of the device or pore convergence fluid can be used additional<,

• Q: Why is it painful during use?
  A: © Please apply a lower level of suction; @ Please select asmaller suction nozzle; @ Please keep moving during operation, and do not keep the device on one part for more than 3 sec; @ Each treatment time should not exceed S
  minutes.

• Q: How often do you use it?
  A: Once in a week for sensitive skin and dry skin, twice a week for oily and mixed skin.

• Q: How to select an appropriate level?
  A: Before using the device, please check the suction force with your palm or forearm, then for the face, it is recommended to start the test from “Level 1 •, and then gradually adjust it to the appropriate level.

• Q: Why can’ t the APP be connected?
  A: © Please ensure that the visual blackhead vacuum device is turned on. @WIFI in setting in your phone, then connect to the right WIFI of the device.

• Q: Why does the APP always about crash back?
  A: Probably due to low battery, please try again once the device isfullycharged.

• Q: How long can it be using once it is fully charged?
  A: It can be using continuously for 60 mins when it is connected to the mobile phone and for90 mins when it is not connected to the mobile

Environmental Protection

1. This product and packaging materials and accessories are recyclable materials.
2. Dividewaste into different recycling levels tofacilit- A ate the recycling of useful materials.

waste Treatment

This label on this product or in the owner’ smanual or on the package indicates that the product cannot )t be disposed of as general household waste at the end of its useful life. Please consult the local govemmentf or recycling according to tot he classification of – the waste. Please remove the battery from the machine before discarding the appliance, and must keep the machine power off when removing the battery; the battery must be safely disposed.

After-sales Protection and Service!

1. inFace provides a one-year warranty for products service standard . The warranty period starts from the date of purchase.
2. During the warranty period, for the failure of the product due to defects in the material or production process, we will replace the parts or the entire product as appropriate
3. To apply for warranty, the product and the proof(purchase invoice) that can prove the purchase date must be handed over to the merchant.

The following conditions are not covered by the warranty: ©Damage caused by improper use, for example: using the wrong power supply, inserting the product into an unsuitable outlet, man-made damage, etc. @Product aging and wear caused by normal use. ®For other purposes, or improper operation or non- professional maintenance and use of non-our company’s accessories, resulting in product problems \1X:onsumables, accessories, etc.
@Damage caused by force majeure factors (such as lightning, earthquake, flood, etc.).
Note: Do not immerse the instrument in water at any time Damage to the machine caused by human factors is not covered by the warranty. II there is any change in the above list, the relevant regulations newly formulated by the company or the relevant laws and regulations updated by the country shall prevail. For specific warranty terms, please consult the national unified service hotline 0086-400-007’8388

After-sales Contact Information

Tel: 0006-400–007 ·8388
Service Wechat Account, migoosmart
Working Hours: 9: 00·18: 00 from Monday to Saturday
( China time, dayoffin holidays and weekend I
Company Information, Shenzhen MigoosmartCo., Ltd.
Address: RM1701 Building B, Fenghuang ZhiGu, No.SO TieZai
Road, Gongle Community, Xixiang, Bao’an District, Shenzhen, China
E•mail: [email protected]
Official Website: www.migoosmart.com
ofl\a.,IWeb,lt,
Post Code: S18000

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>