JBL IPX8 Reflect Flow Pro Plus User Guide

June 6, 2024
JBL

QUICK START CUIDE
REFLECTFLOWPRO

WHAT’S IN THE BOX

APP

JBL Headphones
GET EVEN MORE CONTROL AND PERSONALIZATION OF YOUR LISTENING EXPERIENCE WITH THIS FREE APP.

HOW TO WEAR

FIRST TIME USE

POWER ON & CONNECT

DUAL CONNECT + SYNC

CONTROLS

AUTO PLAY/PAUSE

POWER OFF

MANUAL SETUP

DO MORE WITH THE APP

HANDS-FREE VOICE CONTROL

Get more done on the go. Say “Ok Google” to get started.
“Play my workout playlist”
“Turn up the volume”
“Send a message”
“What’s my schedule today?”
“Set an alarm for 7 AM”

Note: Only available on Android™

HANDS-FREE VOICE CONTROL

Ask Alexa to play music, answer questions, play the news, check the weather, set alarms, control compatible smart home devices, and more.

“Alexa, play today’s hits”
“Alexa, volume up.”
“Alexa, skip this song.”
“Alexa, what’s the weather?”
“Alexa, turn off the TV.”
“Alexa, start my commute”

Note: Android TM 6.0 or higher is required for full access to Alexa features when using this device.

CHARGING

LED BEHAVIORS

TECH SPEC

Model: REFLECT FLOW PRO
Driver Size: 6.8 mm/ 0.27” Dynamic Driver
Power supply: 5 V  1 A
Earbud: 7.2 g per pc (14.4 g combined)/ 0.016 lbs per pc (0.032 lbs combined)
Charging case: 61.5 g/ 0.136 lbs
Earbud battery type: Li-Polymer (85 mAh/ 3.7 V)
Charging case battery type: Li-Polymer (540 mAh/ 3.85 V)
Charging time: 2 hrs from empty
Music play time with BT on and ANC off: up to 10 hrs
Music play time with BT on and ANC on: up to 8 hrs
Frequency response: 20 Hz – 20 kHz
Impedance: 16 ohm
Sensitivity: 100 dB SPL@1 kHz
Maximum SPL: 94 dB
Microphone sensitivity: -38 dBV/Pa@1 KHz
Bluetooth version: 5.0
 Bluetooth profile version: A2DP V1.3 AVRCP V1.6 HFP V1.7
Bluetooth transmitter frequency range: 2.4 GHz – 2.4835 GHz
Bluetooth transmitter power: 10 dBm
Bluetooth transmitter modulation: GFSK, π/4 QPSK, 8DPSK
Maximum operation temperature: 45 °C

IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-RFLOWPRO) has also been tested against this  SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.125W/Kg.

The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories thajt maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters, and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF jexposure requirements and should be avoided.

Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0  cm must be maintained between the user’s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

Google, Android, and Google Play are trademarks of Google LLC.

Amazon, Alexa, Amazon Music, and all related logos are trademarks of Amazon, Inc. or its affiliates.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals