Whirlpool WCD5090JWH Compact Dryer User Guide
- June 6, 2024
- Whirlpool
Table of Contents
- OPTIONS
- RINSE CONDENSER ONCE A MONTH
- EMPTY WATER TANK BEFORE EVERY CYCLE
- CLEAN BOTTOM FILTER EVERY 5 CYCLES
- USE KNOB TO SELECT OPTION/ SETTING/CYCLE AND PRESS TO ADVANCE
- CYCLES AND SETTINGS
- CLEAN LINT SCREEN BEFORE EVERY CYCLE
- TOUCH AND HOLD POWER TO TURN ON DRYER
- TOUCH START/PAUSE TO BEGIN CYCLE
- LED INDICATORS
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Whirlpool WCD5090JWH Compact Dryer User Guide
OPTIONS
- Cycle Signal, Control Lock, and Delay Start can be selected with all cycles.
Other Options
RINSE CONDENSER ONCE A MONTH
EMPTY WATER TANK BEFORE EVERY CYCLE
NOTE 1: These clothes dryer’s Government energy certifications were based
on the Normal Cycle, Nonadjustable Temperature Setting and Normal Dryness
Level. The as-shipped default of Wrinkle Shield off, was used.
NOTE 2: See “Program/Cycle Guide” in the Owner’s Manual for more
information about cycles, settings, and options. Not all settings and options
are available on each cycle. Read your Owner’s Manual before using your dryer.
CLEAN BOTTOM FILTER EVERY 5 CYCLES
Some small amount of water will be present when the filter is removed.
USE KNOB TO SELECT OPTION/ SETTING/CYCLE AND PRESS TO ADVANCE
CYCLES AND SETTINGS
- Each cycle has default time and dryness level settings. To use these settings, simply touch the Start/ Pause button to begin drying.
- To modify drying time for the Timed Dry cycles, select the Timed Dry setting.
- For all other cycles, you can modify the dryness level by selecting the Dryness Level setting.
CLEAN LINT SCREEN BEFORE EVERY CYCLE
TOUCH AND HOLD POWER TO TURN ON DRYER
TOUCH START/PAUSE TO BEGIN CYCLE
LED INDICATORS
®/™ ©2021 Whirlpool. All rights reserved. Used under license in Canada.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>