Shakti B0CKH8XYWH Duster Handheld Vacuum Cleaner Instruction Manual
- June 14, 2024
- Shakti
Table of Contents
Shakti B0CKH8XYWH Duster Handheld Vacuum Cleaner
Product Information
The handheld vacuum cleaner is a convenient and portable cleaning device designed to effectively clean various surfaces. It features a dust cup for easy debris collection, a handle release button for effortless operation, and a power switch for convenient control. The vacuum cleaner operates on a main power supply of 220-240V~ 50Hz and should not be used to vacuum water or inflammable materials.
Product Usage Instructions
Assembling the Vacuum Cleaner:
- Follow these steps to assemble the vacuum cleaner:
- Press the handle release button to attach the handle to the main body.
- Insert the dust cup into the designated slot and ensure it is properly installed.
- Attach the wind hook to the main body for easy storage.
Using the Accessories
- To utilize the different accessories, please follow these instructions:
- For nozzle tool and brush installation, select either the crevice nozzle or brush and insert it at the suction end based on your cleaning needs.
- Use the connector tool to connect the multipurpose brush.
- Install the pipe and nozzle for specific cleaning tasks.
Operating the Vacuum Cleaner
- To use the vacuum cleaner, follow these steps:
- The power switch has two positions. Slide the switch button to ON to start the unit and OFF to switch it off.
- Select the appropriate accessory and connect it to the suction end.
- Switch on the vacuum cleaner for cleaning and switch it off after use.
- Use the upper hooker to wind the power cord during storage and the lower hooker to unwind the power cord during use.
Maintenance
- Proper maintenance of the vacuum cleaner ensures optimal performance. Follow these maintenance steps:
- To remove the dust cup from the main body, hold it and press the designated button.
- Clean the dust cup and use a soft brush to remove dust from the filter.
- If the filter becomes blocked, wash it and allow it to dry for 24 hours before reinserting it.
Troubleshooting
- If you encounter any issues with the vacuum cleaner, refer to the following solutions:
- If the power plug is not properly fitted in the socket, reinsert it correctly.
- Check the circuit breaker if there is no power.
- If the power switch is not working, press the switch of VC, pull the plug, and wait for the thermal protector.
- If there is low suction, clear any blockages in the main brush or accessories and timely remove dirt.
- If there is too much dust in the filter, clear the filter.
- If dust leaks out from the vacuum cleaner, replace or reinstall the filter.
Disposal and Recycling
Waste electrical products should not be disposed of with household waste.
Please recycle them where facilities exist. Check with your Local Authority or
local store for recycling advice. Do not dispose of this product with normal
household waste; take it to a collection point for recycling of electrical and
electronic equipment.
Contact Information
For further assistance or inquiries, please contact:
- Shakti Technology
- Rajkot, Gujarat (India)
- Email: shaktiservice70@gmail.com
- Phone: +91 90997 08177, +91 95582 85760
- Website: www.shaktitool.com
Caution:
- Before using the appliance, make sure the dust cup is properly installed
- Make sure the main power supply is 220-240V~ 50Hz
- Do not vacuum water or inammable material
- Do not store or use the machine close to high temperature places
- If abnormal noise, smell, smoke or any other failure is detected, you should turn o the appliance and unplug it. Then contact with the service center for repair. Do not repair by yourself
- If the supply cord is damaged, it must be replaced in order to avoid a hazard
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety
- Children should be supervised to ensure that they do not play with the appliance
- The plug must be removed from the power socket before any maintenance or replacement
How to assemble
How to use the accessories
-
Install nozzle tool and brush: Select crevice nozzle or brush and insert at the suction end according to your cleaning need.
-
Connector tool: To be used to connect the multipurpose brush.
-
**Install Pipe and Nozzle :
**
How to Use
The power switch has two dierent positions. Slide the switch button to “ON” to start the unit and “OFF” to switch OFF the unit.
- Select the correct accessory and connect at the suction end. Switch on the vacuum cleaner for cleaning and switch o after using it.
- Use the upper hooker to wind the power cord during storage and lower hooker to unwind the power cord during use.
Maintenance
-
Hold the dust cup and press the button to remove the dust cup from the main body.
-
Clear the dust cup. A soft brush can be used to clean dust on lter.
-
If the lter gets blocked, wash the lter and get it dry. Put it back after 24 hours.
TROUBLESHOOTING
DISPOSAL
- Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice.
- Do not dispose this product by normal household waste, but take it to a collection point and recycling of electrical and electronic equipment. This is indicated by the symbol on the product, user manual or packaging. Re-use, material utilization or other forms of old appliances, you make an important contribution in protecting our environment.
CONTACT US
- Shakti Technolgy Rajkot, Gujarat (India).
- +91 90997 08177
- +91 95582 85760
- shaktiservice70@gmail.com
- www.shaktitool.com