BRESSER 3810030 Mobile Solar Panel Instruction Manual

: June 6, 2024
: BRESSER

BRESSER 3810030 Mobile Solar Panel

GENERAL SAFETY INSTRUCTIONS

INTENDED USE

The device is intended for charging or operating mobile devices.
The device is intended for private use only.
Suitable for use in dry, sunny outdoor areas.

DANGER!
Danger of bodily injury!

·This device contains current-generating electronic parts (solar modules) as well as current-car- rying parts. Never leave children unattended when handling the device! Only use the device as described in the manual. Otherwise, you run the DANGER of an ELECTRIC SHOCK.
Do not hit or pierce the solar modules. Damaged solar modules can release toxic and corrosive chemicals. Do not touch damaged solar panel. In the event of contact, wash appropriate parts of the body thoroughly with clean water and contact a doctor if necessary.
Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a DANGER OF CHOKING!

WARNING!
Fire/Explosion hazard!

Never operate solar panel near extreme heat sources such as fire or similar. Do not short-circuit or throw into fire! This can cause explosions!

WARNING!
Danger of environmental damage!

Do not hit or pierce the solar modules. This can release chemicals that can cause environmental damage.

ATTENTION!
Material damage due to improper handling!

Do not disassemble the device! In the event of a defect, please contact the after sales support number listed below.
Do not subject the device to excessive vibrations.

EC DECLARATION OF CONFORMITY

A”Declaration of conformity” in accordance with the applicable directives and corresponding standards has been prepared by Bresser GmbH. The full text of the EC declaration of conformity is available at the following Internet address:
Modell 21W: www.bresser.de/download/3810030/CE/3810030_CE.pdf
Modell 40W: www.bresser.de/download/3810040/CE/3810040_CE.pdf
Modell 60W: www.bresser.de/download/3810040/CE/3810050_CE.pdf

UKCA DECLARATION OF CONFORMITY

A”Declaration of conformity” in accordance with the applicable directives and corresponding standards has been prepared by Bresser UK Ltd. The full text of the UKCA declaration of conformity is available at the following Internet address:
Model 21W: www.bresser.de/download/3810030/UKCA/3810030_UKCA.pdf
Model 40W: www.bresser.de/download/3810040/UKCA/3810040_CE.pdf
Model 60W: www.bresser.de/download/3810040/UKCA/3810050_CE.pdf

SCOPE OF DELIVERY (Fig. 1)

Model 3810030
A. Panel bag with solar modules1,2 and connection panel 1,3
B. 3 pcs. DC adapter plug2
C. 2 pcs. snap hook (karabiner)
D. DC connection cable

E. Instruction manual
Models 3810040 & 3810050
A. Panel bag with solar modules1,2 and connection panel1,3
B. 3 pcs. DC adapter plug2
C. 4 pcs. snap hook (karabiner)
D. DC connection cable1
E. Instruction manual

PARTS OVERVIEW (FIG. 2)

All models

Panel bag
Compartment with connections1,2
Solar modules1,2
Eyelets1,2

CONNECTION PANEL1,3 (Fig. 3)

Model 3810030
5. USB-A (black)
6. DC1,2 (direct current)
7. Function indicator

Models 3810040 & 3810050
5. USB-A (black)
6. DC (direct current)
7. Function indicator
8. USB-A (orange) QC 3.0 (quick charge)

SITE SELECTION AND ASSEMBLY

All models
Note:
A steady supply of sunlight to the solar modules is absolutely essential for consistent power generation and thus for charging or operating a connected device. An interruption due to shadowing or similar can lead to an interruption in power generation.

Open the panel bag (Fig. 2, 1) and unfold it so that the solar modules (Fig. 2, 3) point upwards.
Select a location for the solar panels where they will receive direct and continuous sunlight.
Through the eyelets (Fig. 2, 4), the panel bag can be secured with the snap hooks (Fig. 1, D) must be fixed in a suitable place if necessary.
The solar panel is ready for use.

CONNECTING DEVICES

CAUTION!
Before connecting an end device (smartphone, tablet, powerbank, etc.) to the solar panel, make sure that it is suitable for connection. For more information, please refer to the user manual of the corresponding terminal device. The manufacturer accepts no responsibility for damage resulting from improper handling and/or the use of unsuitable connections.
Protect the terminal device connected to the solar panel from direct sunlight to avoid damage.
Place it, for example, under the solar panel or in a separate bag, preferably in the shade.

Note:
As soon as a terminal device is connected and supplied with power by the solar panel, the function light is illuminated.

USB-A (black)

All models

Connect a suitable USB cable4 to the USB-A port (black) (Fig. 3, 5).
Insert the plug on the USB cable into the socket provided on the desired end device. The device is automatically powered or charged.

USB-A (orange) Quick Charge 3.0 (QC 3.0)
Only models 3810040/3810050

Connect a compatible USB cable4 to the USB-A port (orange) (Fig. 3, 8).
Insert the plug on the USB cable into the socket provided on the desired end device. The device is automatically powered or charged (fast charge)

DC direct current
Model 3810030

Note:
The above model is supplied with a separate DC connection cable (Fig. 1, D).

Insert the DC connection cable (Fig. 1, D) into the DC socket (Fig. 3, 6) on the connection panel.
Connect a suitable DC adapter plug (Fig. 1, B) to the plug of the DC connection cable (Fig. 1, A).
Insert the DC adapter plug into the designated connection socket on thedesired end device. The device is automatically powered or charged.

Models 3810040/3810050

Note:
The above models have an integrated DC connection cable (Fig. 1, D).

Connect a suitable DC adapter plug (Fig. 1, B) to the plug of the DC connection cable (Fig. 1, A).
Insert the DC adapter plug into the designated connection socket on the desired end device. The device is automatically powered or charged.

CLEANING AND MAINTENANCE

Before cleaning, remove the solar panel from the sun and allow it to cool in the shade for a few minutes!
Only wipe the solar modules with a dry, soft and lint-free cloth (not a microfiber cloth) to remove dust or dirt.
Do not use hard or sharp-edged tools or cleaning fluids to avoid damage to the solar modules.
Protect the device from dust and moisture! Fold up the solar panel after use and store it at room temperature in a dry, dust-free place.

DISPOSAL

Dispose of the packaging materials properly, according to their type, such as paper or cardboard. Contact your local waste-disposal service or environmental authority for information on the proper disposal.

PACKING

| Your device is packaged to protect it from damage in transit. Packaging is made of materials that can be disposed of in an environmentally friendly manner and recycled properly.
---|---
| Separation note on packaging:
Other cardboard
---|---

ELECTRONICS

Do not dispose of electronic devices in the household garbage!
The adjacent symbol of a crossed-out dustbin means that the device is subject to Directive 2012/19/EU. Old devices must not be disposed of in normal household waste. In accordance with Directive 2012/19/EU, the device must be disposed of in an orderly manner at the end of its service life. In the process, recyclable materials contained in the device are recycled and the burden on the environment is avoided. Hand in the old device at a collection point for electrical waste or at a recycling centre. Contact your local waste disposal company or your municipal administration for more information.

WARRANTY

The regular warranty period is 2 years and begins on the day of purchase. For complete warranty terms and services, please visit www.bresser.de/warranty_terms.

SERVICE

In case of warranty/damage, please always contact our customer service first (preferably by e-mail).
Here our competent employees are at your disposal. In many cases, small problems can already be solved in this way. However, if in individual cases a repair or replacement of the device is necessary, the customer service will arrange for an appropriate return.

CONTACT DETAILS:

e-mail: service@bresseruk.com
Service hotline*: +44 1342 837 098

* Monday-Friday, 9 a.m.-4 p.m.
Call number in the British fixed network, charges for calls depend on the tariff of your telecommunication provider, calls from abroad may be more expensive

TECHNICAL DATA

Item no./model	3810030 (21W)	3810040 (40W)	3810050 (60W)
Capacity	21W	40W	60W
Efficiency	≥20%	≥20%	≥20%
Peak power Voltage (Vmp(V))	18V	18V	18V
Peak power current (Imp(A))	1.1A	2.2A	3.3A
Open circuit voltage (Voc(V))	21.6V	21.6V	21.6V
Short circuit current (Isc(A))	1.22A	2.44A	3.66A
Panel type	Monocrystalline PET solar module	Monocrystalline PET solar
module	Monocrystalline PET solar module
Material	Polyester splashback fabric	Polyester splashback fabric	Polyester

FREQUENTLY ASKED QUESTIONS (FAQ) & SOLUTIONS

What can be charged/operated with the solar panel?
• End devices with USB or DC connection such as smartphones, tablets, GPS trackers as well as portable power banks or power stations. The basic prerequisite is the suitability for the connection to a solar panel with the corresponding power.
Is the solar panel waterproof?
• The solar panel is splash-proof.
• Never immerse the solar panel into water and do not leave it outdoors in extremely damp or wet and cold weather – especially not in frost, snow and rain or similar!
If my terminal requires a current of 1A, can it be damaged by the applied current of 2A of the solar panel?
• No. The solar panel has an intelligent charging technology that detects the needs of your end device and delivers only the required current. For example, if your smartphone requires 1A, only 1A will be delivered.
What can I do if my terminal is not charging from the solar panel?
– Consult the user manual of your terminal device to find out whether the applied current voltage is supported or sufficient. 5V (USB) or 12V~18V (DC).
• A cloudy sky and indirect sunlight can affect the flow of current, which in turn interrupts the charging process. Place the solar panel in direct sunlight or wait for a cloudless sky.
• Clean the solar modules. Be sure to follow the instructions under “Cleaning and Maintenance” to avoid damage.
• Keep fire, water and chemicals away from the solar panel.
Does the solar panel work under partly cloudy skies or in partial shade?
Yes, but this affects the efficiency and duration of the charging process.
Can the solar panel be used to charge a powerbank?
Yes. When charging the powerbank, make sure it is protected from direct sunlight to avoid damage.

Service

Please contact the service centre first for any questions regarding the product or claims, preferably by e-mail.
E-Mail: service@bresseruk.com
*Telephone:** +44 1342 837 098

BRESSER UK Ltd.
Suite 3G, Eden House
Enterprise Way
Edenbridge, Kent TN8 6HF
United Kingdom

*Number charged at local rates in the UK (the amount you will be charged per phone call will depend on the tariff of your phone provider); calls from abroad will involve higher costs.

Bresser GmbH
Gutenbergstraße 2
46414 Rhede · Germany
www.bresser.de
@BresserEurope

© 2021 Bresser GmbH, 46414 Rhede, Germany.
Errors and changes reserved. Irrtümer und Änderungen vorbehalten.
_Manual_3810030-3810040-3810050_Mobile-Solar-Panel_en-de_BRESSERv062021a

Documents / Resources

| BRESSER 3810030 Mobile Solar Panel [pdf] Instruction Manual
3810030, 3810030 Mobile Solar Panel, 3810040, 3810050, Mobile Solar Panel, Solar Panel
---|---