Baseus BS-W523 Swan 2-in-1 Wireless Magnetic Charging Bracket User Manual

June 6, 2024
Baseus

Baseus Swan 2-in-1 Wireless Magnetic Charging Bracket 20W ( suit for iPl2)
User Manual

Please Read This User Manual Completely And Keep It Property

Product Introduction: Thanks for your choosing our wireless charger, Before you use this product, please read this manual carefully and save it.

Product parameters

Name: Baseus Swan 2-in-1 Wireless Magnetic Charging Bracket
Model No.: BS-W523
Material: Plastic + Stainless steel + Silica gel
Color: Black/White
Interface: Type-C
Input Current: 9V 2A, 12V 2A Max. (It is recommended to use with a standard adapter or 24W or higher QC/PD adapter.) Output Power: Up to 10W charging stand Up to 10W charging dock
Compatibility:
Charging stand: Only compatible with iP12 series
Charging dock: Supports Qi-compliant wireless charging devices
Product Size: 106.5mm106.5rnm158.2mrin (Without packaging)
Product Weight: 270g (Without Packaging)
The above data are measured by the Baseus laboratory, the actual use will be slightly different depending on the specific circumstances.

Packing list

Wireless charger1
Type-C data cable lm

1 User manual1
Warranty card
1

User instruction

  1. Plug the USB port into the adapter port, and put your phone on the emission area, make sure the receiving area of the mobile is magnetic suction with the emission area of the wireless charger. (normally the receiving area is in the middle of the mobile)
  2. Remove your phone once charging is completed.

Indicator

  1. Connect the wireless charger to the USB port, The white, indicator will be light on;
  2. The indicator light is breath at charging mode;
  3. If the indicator light flashes very fast, please check if you placed the Wireless Charger and the mobile properly, and please make sure there is no metal placed between the Charger and the mobile.

Safety Instructions

If your mobile is running an APP with high power consumption or is running the APP for a long time, while charging wirelessly, the mobile may heat up. It is a normal situation, will not influence the life or performance of the mobile and the Wireless Charger.

  • This charger only supports iP 12 series with magnetic wireless charging function;
  • This chargeronly compatible with standard iP12 series cases and Baseus magnetic cases. Third-party magnet accessories may not be compatible with the charger;
  • It is recommended to use PD certified adapters or other PD adapters that meet international safety standards(9V 2A,12V 2A);
  • The applicable operation temperature range is from 0°C to 35°C. And the storage temperature range is from -20°C to 50°C. Using the Wireless Charger out of the suggested temperature range may damage the product or shorten battery life;
  • Avoid children and pets chewing, swallowing the Wireless charger;
  • Do not disassemble, modify or repair the Wireless Charger by yourself;
  • Do not place the magnetic stripe card (e.g. credit card, phone card, bank passbook, and record card) near the Wireless Charger while charging, to avoid the magnetic field generated by the Wireless Charger damaging the magnetic stripe card.

Statement on Toxic and Hazardous Substances in Electronic Information

Products

Part Description  Toxic or hazardous substances and elements 5
Lead (Pb) Mercury ( Hg)
chromium (CrVI)) Polybrominated
biphenyls (PBB ) Polybrominated

diphenyl ethers (PBDE)
PCB| X| 0| 0| 0| 0| 0
Casing| 0| 0| 0| 0| 0| 0
Accessory| 0| O| 0| 0| 0| 0

This form is compiled in accordance with SJ/T 11364.
0: It indicates that the content of the toxic and harmful substance in all homogeneous materials of the component is below the limit specified in GB/T 26572 standard.
X: The content of toxic and harmful substances in at least one homogeneous material of this part exceeds the limit stipulated in GB/T 26572 standard.
This product complies with EU RoHS 2.0 Directive(2011/65/EU)
Warm Tip: The 5-year icon refers to the “effective life of environmental protection”, not the product quality assurance period. Electronic products all contain toxic and harmful substances such as lead, mercury and cadmium. Once they are overused, toxic and harmful substances may leak or mutate, cause pollution to the environment, or cause serious damage to people and property. The term of “environmental protection use” means that all electronic products will be required to use within this effective period. We will no longer be responsible for the quality of the products due to the safety risks that arise after the safe use period.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

Shenzhen Times Innovation Technology Co., Ltd. Add: 5th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen
Executive Standard: Q/SSCZ 021-2020
Hotline: +86-4000-712-711
Website: www.baseus.com
Copyright©2010-2021 Shenzhen Times Innovation Technology Co., Ltd.
All Rights Reserved

http://weixin.qq.com/r/JnXp8RfE6kqVrVOS9yA0

PB3093Z
Designed by Baseus
Made in China

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals