laser HIT WIRELESS-X HDMI Dongle iPhone Instructions

laser HIT WIRELESS-X HDMI Dongle iPhone

SETUP WIRELESS-X HDMI DONGLE iPhone

CONNECT THE DONGLE

OPTION 1 – DONGLE POWERED BY TV

1.  Connect the 3-END CABLE to the WIRELESS-X dongle.
2.  Plug-in the dongle directly into an HDMI port on your TV.
3.  Plug the USB-END to USB port labeled 5V/1A on your TV.
4.  Place the ANTENNA-END of cable at a location with good WiFi reception.
5.  Turn ON the TV and select the Input to the HDMI port.
6.  Wait few seconds until dongles’ SSID and Password appears on the TV screen.

OPTION 2 – DONGLE POWERED BY POWER ADAPTER

1.  Connect the 3-END CABLE to the WIRELESS-X dongle.
2.  Plug-in the dongle directly into an HDMI port on your TV.
3.  Plug the USB-END to power adapter labeled 5V, 1A.
4.  Plug the power adapter to power outlet.
5.  Place the ANTENNA-END of cable at a location with good WiFi reception.
6.  Turn ON the TV and select the Input to the HDMI port.
7.  Wait few seconds until dongles’ SSID and Password appears on the TV screen.

Warning: Make sure the Antenna-End is located as much as possible from TV body, power outlets/adapters, any cables, especially power cable.

SETUP THE DONGLE (1st time)

1.  Find Dongles’ SSID and Password on the top of the TV screen.
2.  On your iPhone go to Settings -> WiFi -> Choose a Network… and select LaserHIT XXX.
3.  Enter the password.
4.  Verify the phone connected to the dongle (wait for blue check mark appears).
5.  Verify the dongle connected to the phone (wait for blue bubble appears).

MIRRORING iPHONE SCREEN

START MIRRORING iPHONE SCREEN

1.  Swipe-up on the iPhone screen (Swipe-down on iPhone X) to open short-cut settings.
2.  Tap on Screen Mirroring and select LaserHIT XXX.
3.  Wait for the Phone screen appears on your TV.
4. . You are all set. Open LaserHIT app and start practice.

STOP MIRRORING

1.  Swipe-up on the iPhone screen (Swipe-down on iPhone X).
2.  Tap on Screen Mirroring button with LaserHIT XXX label.
3.  Tap on Stop Mirroring.

SETUP WIRELESS-X HDMI DONGLE Android

CONNECT THE DONGLE

OPTION 1 – DONGLE POWERED BY TV

1.  Connect the 3-END CABLE to the WIRELESS-X dongle.
2.  Plug-in the dongle directly into an HDMI port on your TV.
3.  Plug the USB-END to USB port labeled 5V/1A on your TV.
4.  Place the ANTENNA-END of cable at a location with good WiFi reception.
5.  Turn ON the TV and select the Input to the HDMI port.
6.  Wait few seconds until dongles’ SSID and Password appears on the TV screen.

OPTION 2 – DONGLE POWERED BY POWER ADAPTER

1.  Connect the 3-END CABLE to the WIRELESS-X dongle.
2.  Plug-in the dongle directly into an HDMI port on your TV.
3.  Plug the USB-END to power adapter labeled 5V, 1A.
4.  Plug the power adapter to power outlet.
5.  Place the ANTENNA-END of cable at a location with good WiFi reception.
6.  Turn ON the TV and select the Input to the HDMI port.
7.  Wait few seconds until dongles’ SSID and Password appears on the TV screen.

Warning : Make sure the Antenna-End is located as much as possible from TV body, power outlets/adapters, any cables, especially power cable.

SETUP THE DONGLE

Find Dongle SSID on the top of the TV screen. The password is not necessary for screen mirroring on the Android platform.

START MIRRORING PHONE SCREEN
(refer to LaserHIT XXX instead of MiraScreen XXX on the images below)

SAMSUNG

HUAWEI

SONY

LGE

MOTOROLA

HTC

ONEPLUS

MEIZU

LENOVO

FCC

Documents / Resources

| laser HIT WIRELESS-X HDMI Dongle iPhone [pdf] Instructions
WIRELESSX, 2AZIE-WIRELESSX, 2AZIEWIRELESSX, WIRELESS-X HDMI Dongle iPhone, WIRELESS-X, HDMI Dongle iPhone
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>