crest CVLSL Selfie Ring Light User Manual
- June 6, 2024
- CREST
Table of Contents
SELFIE RING LIGHT
CVLSL
SPECIFICATIONS
- 40 LED’s (20 warm + 20 cold)
- Max power output 1.2W
- Light on running time 45min
- Colour temperature 3500 – 7500K
- Lithium battery: 250mAh – 3.7V
- Charging voltage DC5V
USER MANUAL
- Power / Mode / Brightness select button
- Charging indicator
- USB charging port
- Anti-scratch grip
- Clip mount
- LED light ring
CHARGING
- Insert the supplied micro USB cable into the charging port (3).
- Connect the USB end to a USB power supply 5V.
- The charge indicator will show red light while charging and will turn green when fully charged.
USAGE
- Place selfie ring light over phone/laptop/tablet. Do not cover the camera with light.
- Press the Power / Mode / Brightness button (1) to turn on and adjust the mode of the light.
- Press and hold the Power / Mode / Brightness button (1) to adjust the brightness level.
- Double-tap the Power / Mode / Brightness button (1) to initiate flashing mode.
TO TURN OFF / ON
Cycle through the Power / Mode / Brightness button multiple times until the light turns off.
PO Box 5658
Brendale QLD
Australia 4500
Customer Support
1800 812 261
www.crest.com.au
AUSTRALIAN OWNED
1712/3
Documents / Resources
|
crest CVLSL Selfie Ring
Light
[pdf] User Manual
CVLSL, Selfie Ring Light, CVLSL Selfie Ring Light, CVLSL Selfie Ring Light
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>