MICRODAM MDV500 Prime Digital Vacuum Gauge Instruction Manual
- June 6, 2024
- MICRODAM
Table of Contents
MICRODAM MDV500 Prime Digital Vacuum Gauge
Special features
- Bluetooth connection with smartphone
- Ball-valve to protect vawum sensor
- Replaceable oil filter
- Target vacuum and alarm
- Large bright LCD with big button
- Unit of measure: Micron/Torr/mbar/Pa
- T fitting for easy connection
- Foldable hook for easy mounting
- Back-light display
- Power supply: AA battery x 2
Set target vacuum
- Press Target button ► “Target” on upper right of screen flicker
- Press Left/Right arrow button to select target vacuum ax)Torr unit: OFF ► 0.200 ► 0.300 ► 0.400 ► 0.500 ► 0. 750 ► 1.000 ► OFF
- Press Target button to confirm target vacuum
How to Use Bluetooth
Connection to the smartphone
This equipment can be connected to the smartphone which makes the measured
value checked, saved and sent to the outside.
For this, you need to install an application (the app) on your smartphone.
{Android smartphone: Google Play Store, Apple iPhone: App Store)
Installation of smartphone application (app)
Install the MICRODAM M:>i app on Google Play Store of the Android phone and App Store of Apple iPhone (Store search term : MICRODAM MDi)
Connection of manifold gauge to the smartphone
Prepare for the Bluetoolh connection by pressing the button on the manifold
gauge.
- fyou press the wn button for about 3 seconds, the Bluetooth marl< on the top of the LCD blinks, making the eQuipment ready to be connected to the smartphone.
- When the eQuipment is connected to a smartphone, the Bluetooth marl< stops blinking.
Control buttons
- set measuring unit :
- power on/off
- set target vacuum
- LCD back light on/off I Bluetooth connection
- change unit / change target vacuum
Specification
| r Item | Descriptions l |
|---|---|
| Unit of measure | Micron /Torr/ mbar / Pa |
| Sensor | • Vacuum : Vacuum sensor x 1 |
| Measuring range | 0-25Torr |
| Ambient conditions | • Ambient temperature : -20′-60″C |
• Operating 18rJ1;)8r’atJXS: -1o-50°C
Power supply| • 1.5V AA batteries x 4 units
• Battery rite: about 100 hours (without display light)
Turn on the Bluetooth function of the smartphone.
Implement the MICRODAM MJi app on your smartphone •
Connecting the manifold gauge to the smartphone.
- When yau implement the app, the list of manifold gauges that can be connected automatically is displayed on the screen in green.
- Touch the manifold gauge marked in green on the device list, and then the manifold gauge will be connected to the app.
FCC STATMENT
