DELTA IPC-B200 Industrial PC User

Disclaimer

This manual is only for Delta Electronics, Inc, no copyright without permission. the contents of this manual are not representative of the manufacturer’s commitment,due to the continuous improvement of products, we reserve the right to change the manual, please forgive that if no information in advance.
In no event will the manufacturer be liable for direct. indirect.
Special .incidental or consequential damages. arising out of the improper installation or use. Or inability to use the product or documentation.

Guarantee Clause:
The warranty on the product lasts for 18 months, if the user has additional requirements,the contract sighed between the two sides shall prevail.

Trademarks
All the trademarks mentioned in this manual are registered trademarks of their respective companies.

AMI® is the registered trademark of AMI Company.
Intel®, Celeron®, Pentium®, Atom are the registered trademarks of Intel. NetWare® is the registered trademark of Novell Inc.
PS/2 and OS/2 are the registered trademarks of International Business

Machines
Windows 7, Windows XP, Windows 8 are the registered trademarks of Microsoft

Safety Instructions

• Please read the user manual carefully before using the product, and carefully keep it for future reference.
• Before connecting power supply to the product, please confirm the voltage is compliant with the requirement of the device.
• To avoid electric shock or damage to the product, please unplug the power cord from the socket before cleaning the device by wet rag.
• Please do not use liquid or aerosol cleaner to clean up the device.
• To avoid short circuit or fire, please do not let any liquid get into or splash into the product.
• For a device which needs to use power cord, there must be an easy-to-reach power socket around the device.
• Please do not use the product in a damp environment.
• Before installation, please make sure the device is placed on a solid surface; accidental drop or tipping may cause malfunction or damage to the device.
• Before you connect or unplug any signal cable, make sure all power cords are unplugged in advance;
• To avoid unnecessary damage caused by frequent power-on/off, wait at least 30 seconds after turning off the computer before re-turning on the computer.
• If the product will not be used for a long time, please disconnect the power cord, to avoid damage to the product by transient voltage.
• If the product needs to be upgraded, installed or dismantled, please implement all the operation on an ESD workstation, for some precision devices are sensitive to ESD;
• Ensure excellent heat dissipation and ventilation of the system.
  Please do not open or dismantle the device by yourself. For the sake of safety, this device can only be opened by a professional maintenance person.

Packing List

• A fanless industrial Computer
• 1*AC 100V～240V to DC+12V/5A power adapter
• 1*AC220V power cable
• 2Mounting Bracket & 4Screw
• 1*Driver CD & manual
• 1Certification,1packing list

Product Introduction

1.1 Brief introduction
IPC-B200-9X3E1X00 is a low-power-consumption, high-performance and fanless embedded industrial computer, with material of high-strength and elegant al- alloy and the high-density al-alloy radiator.
This product has low power consumption Intel Baytrail J1900 on board, 4GB DDR3L RAM，max to 8GB (optional), and it has rich I/O interfaces and fully- sealed fanless design, supporting Windows 7/ 8.1/10 Linux and so on.
This product can be used in the field of mechanical equipment，intelligent transportation, industrial automation control and other different embedded solutions.

Product specifications

Main function

| processor| Intel® Baytrail J1900
memory| 4GB DDR3L RAM(up to 8GB)
display| Integrated Intel
storage| SSD 128GB
ethernet| 2RTL8111E GbE
audio| 1Line out
expansion| Mini-PCIE bus expansion, support Wifi ,Bluetooth

I/O

| l   3USB2.0, 1USB3.0

l   2* LAN

l   1*VGA

l   1*HDMI

l   1Line out,1MIC IN

l   1*COM

l   1TF,1SIM(optional)

perform| Dimension| 154 (L) x 126 (W) x 40 (H) mm

ance| ****

structure

| l  Material: high-strength Al-alloy heat dissipating plate

l  color：black

l  Heat dissipation：fanless design

---|---|---
weight| l   720g
Temp| l   Operationg temp:-10°C ～ 50°C

l   Storage temp:-20°C ～ 60°C

Humidity| 90% @ 40°C（non-condensing）

EMC

| l  Limit of radio disturbance meets GB9254-1998 standard Class A

l  Immunity meets the limits of GB/T

17618-1998 standard

Reliability| l   MTBF≥25000h

l   MTTR≤0.5h

safety| Meets basic requirements of GB4943
Mechanic environment

compatibility

| l  Anti-vibration: 5-19Hz/1.0mm amplitude; 19-200Hz/1.0g, acceleration

l   Anti-shock: 10g acceleration, 11ms duration

Power

| l  100~240VAC/50~60Hz 12V5A（with adapter）；

l   Power consumption： 30 W（standby）；

l  Power consumption： 36 W(running MaxPower 100%）；

Application planning

Transportation
Well-packaged products are suited for transportation by truck, ship, and plane. During transportation, products should not be put in open cabin or carriage. During transshipping, products should not be stored in open air without protection from the atmospheric conditions. Products should not be transported together with inflammable, explosive and corrosive substances and are not allowed to be exposed to rain, snow and liquid substances and mechanical force.

Storage Requirements
Products should be stored in package box when it is not used. And warehouse temperature should be -20℃～70℃, and relative humidity should be 20% ~ 85%. In the warehouse, there should be no harmful gas, inflammable, explosive products, and corrosive chemical products, and strong mechanical vibration, shock and strong magnetic field interference. The package box should be at least 10cm above ground, and 50cm away from wall, thermal source, window and air inlet

Caution!

Risk of destroying the device!
When shipping the PC in cold weather, please pay attention to the extreme temperature variation. Under this circumstance, please make sure no water drop (condensation) is formed on the surface or interior of the device. If condensation is formed on the device, please wait for over twelve hours before connecting the device.

Unpack and check the delivered equipment
Unpack the equipment
Pay attention to the following things when you unpack the equipment.

• Please take the advice not to throw away the original packaging material and please retain to use it when the equipment should be transported again.
• Please put the document in a safe place. It will be used in the initial adjustment of equipment and it is a part of the equipment.
• When you check the delivered equipment, please check whether it is obviously damaged during the transportation.
• Please check whether the delivered parcel includes the whole equipment and the accessories you ordered separately. If there is any discrepancy or damage during transportation, please contact our customer service staff.

Installation instructions

Product outline

Product assembly

Interface Definition

USB port
There are 2 USB2.0 and 4 USB 3.0 on this product,following is the pin definition:

USB1~2

| USB2.0| Definition
---|---|---
1| +5V
2| USB Data-
3| USB Data+
4| GND

USB3~6

| USB3.0| Definition
---|---|---
1| GND
2| D＋
3| D－
4| VBUS
5| StdA_SSTX＋
6| StdA_SSTX－
7| GND_DRAIN
8| StdA_SSRX＋
9| StdA_SSRX－

Ethernet

There are 2 Ethernet 1000M on this product,following is the pin definition:

LAN1,LAN2

ACTLED

(Green light)

|

Netstat

| LILED

（green/orange）

|

netstat

| green| 1000Mbps

Twinkle

| With data

transmission

|

orange

|

100Mbps

Light off

| No data

transmission

|

Light off

|

10Mbps

4.3 Standard DB9

COM1～4

| ****

Pin

| Definition
---|---|---
RS-232| RS-485| RS-422
1| DCD#| T/R+| T/R+
2| RXD| T/R-| T/R-
3| TXD| X| RXD+
4| DTR#| X| RXD-
5| GND| GND| GND

6

| ****

DSR#

| VCC (+5V

spare input)

| VCC (+5V spare

input)

7| RTS#| X| X
8| CTS#| X| X
9| RI#| X| X

Standard VGA

VGA Display, its interface is 15 core type D VGA display socket.

VGA

| pin| definition| pin| definition
---|---|---|---|---
1| Red| 2| Green
3| Blue| 4| N.C.
5| GND| 6| Detect
7| GND| 8| GND
9| +5V| 10| GND
11| NC| 12| DDCDATA
13| HSYNC| 14| VSYNC

4.5 Standard HDMI A Type

HDMI

| pin| definition| pin| definition
---|---|---|---|---
1| DATA2+| 2| DATA2 shield
3| DATA2-| 4| DATA1+
5| DATA1 shield| 6| DATA1-
7| DATA0+| 8| DATA0 shield
9| DATA0-| 10| DATA1_CK+
11| DATA1_CK| 12| DATA1_CK-
13| CEC| 14| Reserved
15| SCL（DDC| 16| SDA（DDC data）
17| DCC/CEC GND| 18| +5V
19| Hot swap test| /|

4.6 Power
This product support DC+12 V power in, together with power adapter, and following is the power pin definition:

DC12V input

| pin| definition
---|---|---

1

|

+12V

2

|

GND

Appendix

Host BIOS settings

Main

Press F2 to boot, go into BIOS →CMOS, setting date and time as shown in picture 5-1：

CSTIPC

Enter page of picture5-2, choose “LCD setting” to page of picture5-3

Picture 5-3
In “LCD Panel Type” options, you can change panel pc’ s original resolution, if the resolution you choose is uncompatible with screen’ s real resolution, may lead to an unnormal showing.
On page of pictures 5-4, choose ”AC power Loss Setting” to enter “Restore AC Power Loss” :

• 【Power off】Press switch to boot after power on，
• 【Power on】Auto boot after power on，
• 【Last Status】After power on, if illegal shutdown last time, the pc will return last status ,if normal shutdown, pc will be in power on status.as shown in picture 5-5:

Advanced

• ACPI Settings；
• CPU Configuration；
• SATA Configuration SATA；
• Intel (R) Anti-Theft Technology Configuration；
• USB Configuration；
• SMART Settings；
• Super IO Configuration；
• H/W Monitor；

Chipset
Here you can set I/O port, system memory, graphics memory,as shown in picture 5-7:

Boot

The menu can set Num Lock’ s status when booting, or set storage’s boot program， firstly, choose the first boot device in “Hard Drive BBS Priorities”,， then choose it in “Boot Option #1”,press F4 to save and exit. choose “Hard Drive BBS Priorities” to enter, as shown in pictures 5-8.

Enter “Hard Drive BBS Priorities”, choose first boot device in “Boot Option

1”,as shown in 5-9:![](https://manuals.plus/wp-content/uploads/2022/03/DELTA-

IPC-B200-Industrial-PC-Userfig-18.png)

After last step, press “ESC” to return to last page，choose first boot decvice in “Boot Option #1”again,as shown in picture 5-10,preess “F4” to save, press “enter” to exit.

Security

This menu is used to set a password to enter BIOS Setup and boot.as shown in picture 5-11:

Save & Exit

Enter the CMOS page， choose “Save & Exit” , as shown in picture 5 -12 ：

Press“F3”to recover factory reset, press“F4” to save.

Driver software installation

Chipset driver installation

1. Enter “Driver\Chipset\”, double click “Intel _inf.exe”.
2. Follow notice, click “next step” and “continue”.
3. After installation, choose “Yes” and “finish” in “restart”, the driver software would auto load after restart.

Onboard graphics card driver installation

1. Enter driver CD “Driver\ Graphic\ ”，choose related OS files. double click “setup. exe” with left key.
2. Follow notice, click “next step” and “continue”.
3. After installation, choose “Yes” and “finish” in “restart”, the driver software would auto load after restart.

On board sound card driver installation

1. Enter driver CD “ Driver\Audio\ ”.Choose related OS files, double click “setup. exe” with left key. Following notice, click “next step” and “continue”.
2. After installation, choose “Yes” and “finish” in restart options. the driver software would auto load after restart.

On board network card driver installation

1. Enter driver CD “Driver\LAN\ ”, Choose related OS files,  double click “setup. exe” with left key. Following notice, click “next step” and “continue”.
2. After installation, choose “Yes” and “finish” in restart options. the driver software would auto load after restart.

Trouble & Troubleshooting

Common

Malfunction

| Possible Reasons| Trouble shooting and solution
---|---|---

The device is not operating

| No power supply| Please check the power supply and the power

cable/connector

Improper device

operating environment

| 1.   Check the environment conditions

2.   Please wait for 12 hours before powering on the device shipped in cold day.

The external display is black

| The display has not

been turned on

| Turn on the display
Display output skip to other display channel| After enter OS(check light through “Num Lock”) Use composite key “Ctrl+ALT+F1/F2/F3/F4” to switchover video output between

VGA/DVI/LVDS/HDMI

The display is under “power saving”

mode

| ****

Press any key on the keyboard.

The luminance control is set to

“Black”

| Increase the screen luminance by luminance control. Please refer to the instructions of the

display for detailed information.

Power cable or display cable is not connected

| 1.   Please check whether the power cable & display cable is correctly connected with the display, the system unit or the ground port。

2.   Contact technique support if the screen

remains black after implementing the above measures.

Incorrect time or date

on PC

| Incorrect BIOS setting| Follow the power-on prompt and press the key to enter the BIOS setup, adjust the time and date in

BIOS setup.

BIOS setting is correct while the time and date are not

correct

| ****

Insufficient backup battery capacity

| ****

Replace the battery

USB device has no response

| USB port is disabled

in BIOS

| Use other USB ports or enable that port.
USB2.0 device is connected while

USB 2.0 is disabled

| ****

Enable USB 2.0.

USB port is not supported by the operating system| 1.   Enable USB Legacy Support for the mouse & keyboard (legacy USB is supported);

2.   For other device, appropriate USB drivers are

required.

Common

Malfunction

| Possible Reasons| Trouble shooting and solution
---|---|---

Boot device not found

| In booting priority of the BIOS setting, the device is not the first priority or the device is not include

in the booting device

| ****

Modify the booting priority of the device in the Boot menu of BIOS setting or include that device into the booting priority

No system disk can be found when powering on

| The HDD power cable or data cable is not connected

well

| Check whether the power cable and the data cable of the hard disk(the hard disk shall be installed with operating system and is bootable)

are well connected

System files on the hard disk are damaged| Enter the system(usually WinPE system) with a bootable disk check whether the system in the hard disk is damaged. Reinstall the system if

necessary.

Plug and play I/O card, no I/O card is detected, or I/O card can be used when used

again

| ****

Poor contact of the slot

| ****

Poor contact is usually caused by frequent installation/ uninstallation of the PCI or ISA card, unstable fixing or improper dust-proof measures;     please remove and install the card for a few times or use another slot.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm the radiator of your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>