HAMPTON BAY HBDB73J-SL 73 Gallon Driftwood Grey Resin Wicker Deck Box Installation Guide
- June 6, 2024
- HAMPTON BAY
Table of Contents
HAMPTON BAY HBDB73J-SL 73 Gallon Driftwood Grey Resin Wicker Deck Box
THANKYOU
We appreciate the trust and confidence you have placed in Hampton Bay through
the purchase of this deck box. We strive to continually create qualityproducts
designed to enhance your home. Visit us online to see our full line
of products available for your home improvement needs. Thank you for choosing
Hampton Bay
safety Information
CAUTION:
- Never use this product to store flammables, explosives, or hazardous materials
- To avoid the risk of suffocation, never allow children to play inside the container.
- Supports 225 lb evenly distributed weight
- This product Is not a toy and Is not Intended for use by children.
Pre-Assembly
- Phillips Screwdriver
PACKAGE CONTENTS
| Part | on |
|---|---|
| A | Front Panel x 1 |
| B | Back Panel x 1 |
| C | Seat-Lid Panel x 1 |
| D | Bottom Panel x 1 |
| E | Side Panels x 2 |
| Part | on |
| --- | --- |
| F | LidSupportx1 |
(Pre-assembled at factory)
G| Self-TappinP, Screws x 4
(Pre-assemb ed at factory)
H| Lid Strap/Clip x 2
I| Washersx2
J| Machine Screws x 4
(2 pre-assembled at factory)
Attaching Side Panels to the Bottom PanelAssembly
- Attaching Side Panels to the Bottom Panel
-
- {D) on a level surface.
- Slide a side panel (E) onto the bottom panel {D) then repeat with the other side panel.
- {D) on a level surface.
- Attaching the Back Panel
-
- Slide the back panel (B) Into t position using the slots at the rear edge of the two side panels (E).
- Press the lock tabs (1) Into the slots (2) in the bottom panel and lock in place.
- Slide the back panel (B) Into t position using the slots at the rear edge of the two side panels (E).
- Attaching the Front Panel
-
- Slide the front panel (A) into position using the slots at the front edge of the two side panels (E).
- Press the lock tabs (1) into the slots (2) in the bottom panel and lock in place.
- Slide the front panel (A) into position using the slots at the front edge of the two side panels (E).
- Attaching the Seat-Lid Panel
-
- Hold the seat-lid panel (C) / horizontally and line up the lid ~ hinge tabs (1) with the back “-. _ ~ panelhingepins(2). -G::J
- Push the seat-lid panel (C) /1’X ., horizontally into the back panel % hinge pins (2) and rotate th -lid panel (C) closed In lock in place.
- Hold the seat-lid panel (C) / horizontally and line up the lid ~ hinge tabs (1) with the back “-. _ ~ panelhingepins(2). -G::J
- Attaching Straps
-
- Fold strap clip around the metal loop at the bottom end of the lid strap (H).
- Attach the finished end of the lid strap/clip In the inside of the side panel (E) with a machine screw (J ).
- Repeat with the other side panel.
- Fold strap clip around the metal loop at the bottom end of the lid strap (H).
Care and Cleanlng
- Use soap and water with a soft cloth to clean the product. DO NOT use bleach, ammonia, or caustic cleaners, as these will damage the finish.
- Locks, latches, and hinges should be lubricated regularly, and gas
- shocks wiped with a dry cloth to remove dust and dirt
- Rinse with clean water and dry with a soft, absorbent cloth tnwel.
Warranty
WHAT IS COVERED
This product is covered under a 2 year limited wananty against defects in
materials and workmanship from the date of purchase.
WHAT IS NOT COVERED
This wananty does not cover damage due to neglect, abuse, or weather related
damage. Contact the Customer Service Team at 1-1155-HD-HAMPTON or visit
www.HAMPTONBAY.com.
Questions, problems, missing parts?
call Hampton Bay Customer Service.
8 a.m. – 7 p.m., EST Monday- Friday, 9 a.m. – 6 p.m., EST Saturday
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>