BRESSER 9621601 NightExplorer 15×70 Astronomy Binoculars Instruction Manual
- June 6, 2024
- BRESSER
Table of Contents
9621601 NightExplorer 15×70 Astronomy Binoculars
Instruction Manual
MANUAL DOWNLOAD:
Never use this device to look directly at the sun or in direct proximity of the sun. Doing so may result in a risk of blindness.
GENERAL SAFETY INFORMATION!
RISK of physical injury!
Never look through this device directly at or near the sun. There is a risk of
BLINDING YOURSELF!
Children should only use this device under supervision. Keep packaging
materials (plastic bags, rubber bands, etc.) away from children. There is a
risk of SUFFOCATION.
Fire/Burning RISK!
Never subject the device – especially the lenses – to direct sunlight.
Lightray concentration can cause fires and/or burns.
RISK of material damage!
Never take the device apart. Please consult your dealer if there are any
defects. The dealer will contact our service center and send the device in for
repair if needed. Do not subject the device to temperatures exceeding 60°C!
List of Parts
- Centre axle
- Rubber eyecups
- Tripod connection cap
- Body of the binoculars
- Lens tube
- Individual eyepiece adjustment
- Eyepiece
- Objective lens
- Threaded tripod connection
- Image circle with correctly set eye distance
Eyepieces for spectacle wearers
To use the binoculars while wearing glasses, turn the rubber eyecups (2)
towards the sides and down. If you are not wearing glasses, leave the eyecups
in the upright position to achieve the required distance from the pupils.
Adjusting the eyepiece distance
The distance between the eyes differs between individuals. To achieve perfect
interaction between your eyes and the eyepieces of your binoculars set the
angle at
the center of the binoculars (1) so that you see a circular image (10). Note
this setting for later use.
Adjusting the focus
Your binoculars have single eyepiece adjustment (6) means. To focus look at an
object approximately 100 meters away. Close only your left eye and keep
turning the right eyepiece setting ring 1 until the object looked at is in
sharp focus. Then close only your right eye and turn the left eyepiece setting
1 until the object, you are looking at is again in sharp focus. The binoculars
are now precisely adjusted to your eyesight.
The single eyepiece setting (6) is designed to give you a better perspective.
When switching between objects of varying distance the focus needs only be
readjusted if the change in distance is really major.
Mounting the binoculars on a tripod
Remove the tripod connection cap (3) to access the threaded tripod connection
(9). Then screw on the tripod adapter.
You can use this to mount your binoculars on the included tripod.
Tripod mounting
Tripod parts overview
- Tripod adapter
- Tripod connection thread
- The locking knob of the center column
- Tripod plate
- The base for plate mounting
- Tripod leg
- Ball adapter Locking knob
- Locking knob for angle adjustment
- Centre column
- Extension of the center column
- Tripod length lock
- Rubber feet
NOTE!
Make sure that the quick clamping rings and fixing screws are always hand-
tightened so that the necessary stability of the tripod is guaranteed. Check
the stability before putting it on a device.
Keep holding the photographic or optical device until it is balanced and
secured on the tripod.
Never open the quick clamping rings and fix screws with an attached device to
prevent damage from falling.
TIPS on cleaning
Lenses (eyepieces and/or object lenses) should be cleaned with a soft, lint-
free cloth (e.g. microfibre) only. Do not use excessive pressure – this may
scratch the lens.
Dampen the cleaning cloth with a spectacle cleaning fluid and use it on very
dirty lenses.
Protect the device against dirt and dust.
Leave it to dry properly after use at room temperature.
Then put the dust caps on and store the device in the case provided.
DISPOSAL
Dispose of the packaging materials properly, according to their types, such as
paper or cardboard. Contact your local waste-disposal service or environmental
authority for information on the proper disposal.
WARRANTY & SERVICE
The regular guarantee period is 5 years and begins on the day of purchase. You can consult the full guarantee terms at www.bresser.de/warranty_terms.
In the event of a warranty claim, please first contact the service team responsible for your country, preferably by e-mail or by using the contact form on the website. In most cases, they will be able to help you quickly. You will find the relevant contact information under “Service” in this manual.
IMPORTANT!
Do not send in equipment – even in the event of damage – without first
consulting the Service Department. Unfortunately, unsolicited units cannot be
accepted and processed.
SERVICE
Please contact the service center first for any questions regarding the
product or claims, preferably by e-mail.
E-Mail: service@bresser.de
Telephone*: +49 28 72 80 74 210
BRESSER GmbH
Kundenservice
Gutenbergstr. 2
46414 Rhede
Deutschland
*Number charged at local rates (the amount you will be charged per phone call will depend on the tariff of your phone provider); calls from abroad will involve higher costs.
Contact
Bresser GmbH
Gutenbergstraße 2
46414 Rhede · Germany
www.bresser.de
@BresserEurope
Copyright 2021 © Bresser GmbH
Errors and technical changes reserved.
Manual_9621601_NightExplorer-15x70_en_BRESSER_v042021a
References
- Bresser | Startseite | Expand Your Horizon mit BRESSER
- Bresser | BRESSER NightExplorer 15x70 Astronomie-Fernglas | Expand Your Horizon
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>