ISOtunes IT-36 Advance Tactical Hearing Protector User Guide
- June 6, 2024
- ISOtunes
Table of Contents
IT-36 Advance Tactical Hearing Protector
User Guide
Location of Controls
1. Music Volume Up | 6. Bluetooth Mic |
---|---|
2. Music Volume Down | 7. LED Indicator Light |
3. TSC™ Volume Up | 8. Charging Port |
4. TSC™ Volume Down | 9. Magnetic Earbuds |
5. Multi-Function Button (MFB)
Tactical Sound Control™ Technology
This product includes TSC Technology
– Tactical Sound Control™. This is a microphone technology that allows the
user to hear the world around them, but always at a safe listening level. When
ambient noise breaches a safe listening level, the microphone technology
immediately responds and attenuates to a safe level.
This feature automatically turns on when the product turns on. Adjusting the TSC volume is easy. Simply press the TSC Volume Up ( 3 ) and Down Button ( 4 ).
Charging
The earplugs are charged with a micro-USB charger and hold up to 10 hours of music and talk time between charges.
-
Please charge with the included micro-USB cable by plugging it into the Charging Port (8).
*Charging voltage should not exceed 5v. -
While the cable is plugged into the Charging Port (8), the LED Indicator Light (7) will let you know if the battery is charging or fully charged.
LED Indicator Light
Solid Red = Charging (Cable Plugged In)
Solid Blue = Fully Charged (Cable Plugged In)
Power On/Off
Power On: Press and hold MFB (5) for 3 seconds.
(you will hear “Power On”)
Power Off: Press and hold MFB (5) for 3 seconds.
(you will hear “Power Off”)
LED Indicator Light
Blue Flash = Power On
Red Flash = Power Off
ATTENTION
The Itunes Sport ADVANCE features a power-off feature that conserves battery
life. After 2 hours of Bluetooth disconnection, the device will power off.
Simply power back on to continue using.
Bluetooth Pairing
After powering on, the headphones will automatically enter Pairing Mode.
You will hear “Bluetooth Pairing Mode” and the LED Indicator Light (7) will
flash alternating Blue and Red.
-
Open your Bluetooth settings on your device.
-
Search “ISOtunes Sport ADVANCE.”
Pair and connect.
Once connected you will hear “Bluetooth Connected.”
Dual Connect Mode
This product can connect to two devices at the same time such as your phone and your computer.
-
Pair and Connect to your first device as described in Bluetooth Pairing.
This will be device A. -
Press and hold the MFB (5) for 7 seconds until you hear “Bluetooth Pairing Mode” (you will hear Power Off, keep holding the button until you hear “Bluetooth Pairing Mode”).
-
Pair and Connect to the 2nd device as described in Bluetooth Pairing.
This will be device B. -
On Device A, go to the Bluetooth menu and manually connect to ISOtunes PRO Aware.
-
Both devices are now connected.
Pairing Reset
If you have issues connecting to any device, we recommend a Pairing Reset:
- The headphones need to be powered on.
- Press and hold the Volume Up (1) and the Volume Down (2) for 4 seconds.
- Continue holding, listen for a double tone, and then release.
LED Indicator Light
Alternating Blue & Red = Pairing Mode
Music
Play/Pause: Short single press MFB ( 5 )
Next Track: Double press MFB ( 5 )
Previous Track: Triple press MFB ( 5 )
Music Volume Up Short single press Volume Up ( 1 )
Music Volume Down Short single press Volume Down ( 2 )
TSC™ Volume Up Short single press Volume Up ( 3 )
TSC™ Volume Down: Short single press Volume Down ( 4 )
Phone Calls
Answer/End Call: Short single press MFB (5)
Reject Call: Press and hold MFB (5) for 1 second
Siri/Google Assistant
Press and hold MFB ( 5 ) for 1 second.
Fitting
ANSI S3.19-1974 Table (NRR Table)
EN 352-2:2002 Table (SNR Table)
B5:
SNR: 33 dB
H= 33 dB
M= 30 dB
L= 28dB
APVf=MF-SF9 (dB)
Models
IT-36 ISOtunes Sport ADVANCE
Full manual can be found
atISOtunes.com/ADVANCEManual
Important
Please read, understand, and follow all safety information.
Fitting
The Itunes Sport ADVANCE comes with 4 sets of TRILOGY™ foam eartips (XS, S, M,
L) and 3 sets of silicone eartips (S, M, L). Choose the size that fits best in
your ear canal.
Remember, the snugger the fit, the better the noise blocking. The silicone
eartips are intended for use when NOT in noisy situations.
ISOtunes® TRILOGY™ foam eartips have a threaded core and the sound port on the
earbud is also threaded.
- Twist the foam ear tip counterclockwise to remove and clockwise to place on a new foam ear tip.
- Carefully compress the foam ear tip on the stem/sound port.
- Insert the foam/ear tip into your ear as deeply as is comfortable and hold for 5 seconds while the foam expands.
- Repeat with the second ear tip.
Hint: To open your ear canal wider, lift the top of your ear up and away from your head, as shown in the diagram.
Introduction
Thank you for purchasing ISOtunes Sport ADVANCE professional noise-isolating
earbuds. These earbuds have been specifically designed to protect against
harmful noise – allowing you to block out much of the surrounding noise so you
can listen to your music or talk on the phone with less interruption.
This product has been tested and meets the ANSI & NIOSH standards for a
hearing protector, with a Single Number Rating (SNR) of 33 dB and a Noise
Reduction Rating (NRR) of 26 dB.
Full testing details are available in the Noise Attenuation section of this
booklet.
Noise Attenuation
ISOtunes Sport ADVANCE is tested and approved in accordance with ANSI
S3.19-1974 Specifications.
ANSI
S3.19-1974
The level of noise entering a person’s ear, when these earbuds are worn as
directed, is closely approximated by the difference between the A-weighted
environmental noise level and the Noise Reduction Rating (NRR). Improper fit
of this device will reduce its effectiveness in attenuating noise. Consult the
enclosed instructions for proper fitting.
A1: Frequency (Hz)
A2: Mean Attenuation (dB)
A3: Standard Deviation (dB)
Example:
- The surrounding noise level measured at the ear is 100 dB.
- The NRR of ISOtunes Sport ADVANCE is 26 dB.
- The noise level entering the ear is approximately equal to 74dB.
Please note that the NRR is based on the attenuation of continuous noise and may not be an accurate indicator of the protection attainable against impulsive noise, such as gunfire.
EN 352
B1: Frequency (Hz)
B2: Mean Attenuation (dB)
B3: Standard Deviation (dB)
B4: Assumed Protection Value (APV) (dB)
B5:
H = Hearing protection estimation for high frequency sounds (f ≥ 2000Hz)
M = Hearing protection estimation for medium frequency sounds (500 Hz < f <
2000Hz)
L = Hearing protection estimation for low frequency sounds (f ≤ 500Hz)
SafeMax™ Technology
ISOtunes Sport ADVANCE incorporates SafeMax™ Technology, therefore its volume
output has been limited to 85 decibels (IT-36, IT-38), and 79 decibels
(IT-39). ISOtunes® devices with SafeMax™ Technology are OSHA, NIOSH, and ANSI
compliant and, when designated, meet the European Safety Standard EN 352.
Tactical Sound Control™ Technology
This product includes TSC – Tactical Sound Control or Aware Technology. This
is a microphone technology that allows the user to hear the world around them,
but always at a safe listening level. When ambient noise breaches a safe
listening level, the microphone technology immediately responds and attenuates
to a safe level.
This feature automatically turns on when the product turns on.
Adjusting the TSC/Aware volume is easy. Simply press the TSC/Aware Volume Up
and Down Button.
Cleaning and Maintenance
TRILOGY™ foam eartips are disposable. To ensure peak performance, we recommend replacing TRILOGY™ foam tips every three months or when they become soiled. In order to purchase additional tips, please go to www.ISOtunes.com or www.ISOtunes.co.uk
TRILOGY™ foam eartips should be regularly inspected for deterioration,
cracking, or other damage. The eartips can be cleaned in between uses with a
damp cloth and water.
Over time, the eartips should be replaced.
Clean your ISOtunes Sport ADVANCE by gently wiping them with a clean damp
cloth. Mild soap can be applied to the cloth.
Do not use abrasive cleaning solvents to clean the headset.
Avoid scratching the headset with sharp objects, as this may cause damage.
Keep the headset away from high-temperature areas.
WARNINGS
ISOtunes Sport ADVANCE does an excellent job of blocking outside noise. As
such, this product should NOT be used in environments where users need to be
fully aware of their surroundings for personal safety reasons. For example, do
NOT use them while driving a car or riding a motorcycle. Similarly, do NOT
use them when riding a bicycle outside. The user is solely responsible for
ensuring that this product is used ONLY in safe environments.
This product may be adversely affected by certain chemical substances, such as
bug spray and sunscreen. Further information may be sought from the
manufacturer.
These earplugs should not be used where the connecting cord is at risk of
being caught up during use.
Recommendations
The wearer should ensure the product is properly cleaned and dry before and
after use. Storage should be in a clean and dry location between -20 °C and 50
°C. The battery should not be fully discharged before long-term storage.
The wearer should ensure that:
- The hearing protector is fitted, adjusted, and maintained in accordance with the manufacturer’s instructions.
- The hearing protector is worn at all times in noisy environments.
- The hearing protector is regularly inspected for serviceability.
If these recommendations are not adhered to, the protection afforded by the hearing protector will be severely impaired.
Additional Notes
ISOtunes Sport ADVANCE is compliant with Bluetooth® V5.
We do not guarantee the compatibility of all functions on every
Bluetooth®-enabled device. Please check your device’s user manual for
compatibility and functionality.
For additional information or questions about ISOtunes® products or spares and
accessories, please contact our support team.
UK & Europe
uk-eurosupport@isotunesaudio.com
North America
support@isotunesaudio.com
1-844-396-3737
Monday-Friday 9-5 ET
FCC
Caution: The user is cautioned that changes or modifications ot expressly
approved by the party responsible for compliance could void the users’
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
References
- ISOtunes.com/
- tunes.com
- ISOtunes® | Bluetooth Hearing Protection | Wireless Ear Defenders
- ISOtunes.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>