uRAGE 00186074 Vendetta 210 Gamepad Instruction Manual

June 6, 2024
uRAGE

uRAGE 00186074 Vendetta 210 Gamepad logo

uRAGE 00186074 Vendetta 210 Gamepad

Operating Instructions

IT’S ALL ABOUT U!
Whether it be sports simulations or beat-em-ups, experience your game even more intensively: with our Vendetta series, you really areinthe centreofthe action right from the get-go. Equipped with motors and vibration functions, they offer you situation-dependent reactions you can feel to your game play.Assign your additional keys as you wish with individual functions or entirecombos. An ergonomic design and ideal grip make our products especially comfortable. They allow you to enjoy complete and precise control at any speed.
Explanation of warning symbols and notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.

Package contents

  •  Vendetta 210 game pad
  •  These operating instructions

Safety instructions

  •  The product is intended for private, non-commercial use only.
  •  Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
  •  As with all electrical products, this device should be kept out of the reach of children.
  •  Do not drop the product and do not expose it to any major shocks.
  •  Do not operate the product outside the power limits specified in the technical data.
  •  Do not use the product in areas in which electronic products arenot permitted.
  •  Be considerate. High volumes can disturb or interferewith your surroundings.
  •  Do not open the device or continue to operate it if it becomes damaged.
  •  Keep the packaging material out of the reach of children due to the risk of suffocation.
  •  Dispose of packaging material immediately in accordance with the locally applicable regulations.
  •  Do not modify the product in any way.Doing so voids the warranty.

Start-up and operation

Connecting the controller
Connect the USB plug on the controller to your PC and press the Home button on the controller
Note -Automatic disconnection
Be awarethat you will need to carry out this procedureeach time you log into the PC.

Additional keys

  •  The following action keys can be assigned to the additional keys: 1/2/3/4/L/R/L2/R2/L3/R3/ D-PAD
  •  Individual functions or key combinations can be programmed.
  •  Your settings remain active after an interruption to the connection.
  •  Programming mode is aborted after 30 seconds
  •  Programming mode is ended after 25 keys

Programming the additional keys

  •  Hold the relevant Mkey and “Start” pressed until all four LEDs start to flash
  •  Now enter the individual key or key combination
  •  To finish, press the relevant Mkey again
  •  To delete the Mkeys, hold “Start” and an Mkey pressed.
  •  Now press the Mkey for which you wish to delete the setting.

Turbo function.

  •  The following action keys can be assigned aTurbo function: 1/2/3/4/L/R/L2/R2/L3/R3
  •  To assign the relevant key,hold the action key pressed and then the Turbo key
  •  To remove the Turbo function, repeat the procedure.
  •  Your settings arereset after an interruption to the connection.

Auto function

  •  The following action keys can be assigned aAuto function: 1/2/3/4/L/R/L2/R2/L3/R3
  •  To assign the relevant key,hold the action key pressed and then the Turbo key twice.
  •  To remove the Auto function, repeat the procedure.
  •  Your settings arereset after an interruption to the connection.

Care and maintenance

Only clean this product with aslightly damp, lint-free cloth and do not use aggressive cleaning agents.

Warranty disclaimer

Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failuretoobserve the operating instructions and/or safety notes.

Technical data

  • Input 5V 200 mA
  • System requirement Windows 10 /8.1 /8/ 7

Recycling information

Following the implementation of European Directive 2012/19/EU and 2006/66/EU into national law,the following applies: Electrical and electronic devices as well as batteries must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries to the designated public collection points or to the point of sale at the end of their service lives. Detailed information on this topic is defined in the national laws of the respective country.This presence of the above symbol on the product, operating instructions or package indicates that the product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices/batteries, you are making an important contribution to protecting our environment.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals