iHOME iZBT3 White Noise Machine with Sunrise Wake Up User Manual

: June 6, 2024
: iHome

Table of Contents

OVERVIEW
GETTING STARTED
LIGHT THERAPY
IMPORTANT SAFETY INSTRUCTIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ZENERGY
SUNRISE

Model: iZBT3
White Noise Machine with Sunrise Wake Up
QUESTIONS? visit www.ihome.com

OVERVIEW

GETTING STARTED

Connecting the Unit
Connect the included AC adapter to the DC jack located on the back of the unit and connect the other end to a working wall outlet not controlled by a light switch. Remove the battery pull tab from the bottom of the unit. Press Power to turn the unit ON.
Connecting to Bluetooth
• Turn on your Bluetooth device and make it ‘discoverable’ by turning on Bluetooth mode.
• Press and hold the Bluetooth Pairing Button on the top of the iZBT3 until the Bluetooth Pairing Icon ﬂashes to indicate the unit is in pairing mode.
• Select ‘iHome iZBT3’ on your device’s Bluetooth menu to connect!
Setting Your Clock

1. Press and hold the Time Set Button on the back of the unit until the display ﬂashes and a beep sounds. Release the Time Set Button.
2. Press the – or + Buttons to adjust the time and tap Time Set to conﬁrm (make sure to set correct AM/PM time). The PM indicator appears on the left side of the display. (There is no AM indicator.)
3. Press the – or + Buttons to adjust the year, and tap Time Set to conﬁrm.
4. Press the – or + Buttons to adjust the month, and tap Time Set to conﬁrm.
5. Press the – or + Buttons to adjust the date, and tap Time Set to conﬁrm clock settings.

By default, the DST Switch is set to Auto and will automatically adjust the time in March and November.
Tip : To toggle between 12/24 hour time displays, press the Sound Alarm- Button or the Light Alarm-Button while in Time Set mode.

LIGHT THERAPY

Press the Light Button repeatedly to cycle through light therapy modes:
Sunrise Light
Glow
Hue
Day
OFF
NOTE: Press & Hold to Turn OFF current Light Therapy Mode

SOUND THERAPY
Press the Sound Button repeatedly to cycle through sound therapy modes:

Meditate
4-7-8
Zen
Dream
Peace
Trance
Nature
Ocean| River
Storm
Wind Chimes
Air
Drive
Focus
Quiet
OFF
---|---

NOTE: Press & Hold to Turn OFF current Sound Therapy Mode

PROGRAMMABLE THERAPY PRESETS
The unit allows you to store presets to easily access your favorite light and sound mode combinations.

When your preferred sound and light modes are active, press and hold the Zenergy Button to set up a preset.
Once set, press the Zenergy Button to activate your preset at any time.

TURNING THE ALARM ON/OFF
Preview the Alarm: Press and release the corresponding Alarm Button (Light or Sound) to preview the alarm time.
Arm/Disarm: Press and release the corresponding Alarm Button (Light or Sound) TWICE to toggle the alarm ON and OFF, indicated by the related LED indicator.
When the alarm sounds, press the corresponding Alarm Button (Light or Sound) or the Power/Alarm Reset Button to disable the alarm and reset it for the next day.

SNOOZE
When the alarm is sounding, press the Snooze/Dimmer Button to snooze (default is 9 minutes).
DISPLAY AUTO DIMMER
This unit is equipped with a sensor that will automatically adjust the brightness of the clock display based on the ambient light in your room. When the room is well lit, the display will adjust to Hi brightness for better visibility. In a dark room, it will dim to a lower brightness. You can adjust the “lower limit” of the Auto-dimmer to ﬁt your personal preference of display brightness in a dark room.

The 3 options are:
“Auto 2” – minimum brightness setting will be level 2
“ Auto 1” – minimum brightness setting will be level 1
“Auto 0” – clock display will turn FULLY OFF in a dark room
To adjust Dimmer settings:
Press the Snooze/Dimmer Button repeatedly to cycle through brightness levels: Auto 1, Auto 2, Auto 0, Hi, 3, 2, Lo, or OFF. (Note: choosing Hi, 3, 2, Lo, or OFF are ﬁxed settings and will not auto-adjust.)

PROGRAMMABLE SNOOZE
Set the duration of your snooze timer:

To program Snooze, press and hold the Snooze/Dimmer Button for 2 seconds during normal operation (when no alarm is sounding). Release the button.
Press the – or + Buttons to select the desired snooze time (between 3 and 29 minutes).
Press the Snooze/Dimmer Button again to conﬁrm setting.

SETTING A SLEEP TIMER
To set a sleep timer:

Press the Sleep Button as needed to cycle to the desired sleep timer duration: 120, 90, 60, 30, 15 minutes, or OFF.
Press release the Sleep Button during Sleep Mode to review the remaining sleep time.

USB CHARGING

Connect the standard end of a USB cable (not included) to the USB port on the back of the unit.
Connect the other end to the charging port on your device.

Note: The unit must be connected to a power outlet in order to charge devices.

MAINTENANCE

Place the unit on a level surface away from sources of direct sunlight or excessive heat.
Protect your furniture when placing your unit on natural wood and lacquered ﬁnish. A cloth or other protective material should be placed between it and the furniture.

BATTERY BACK-UP
The unit uses a CR-2450 backup battery to provide continuous alarm operation and clock settings in the event of a temporary power failure. Remove the battery pull tab before use. When ‘Lo Batt’ ﬂashes on the clock display, it is time to replace the backup battery. The battery compartment is located on the bottom of the unit.

Make sure the AC adapter is connected, or you will lose your time and alarm settings during battery replacement.
Use a Phillips screwdriver to open the battery compartment door.
Insert a fresh CR-2450 battery, checking that the polarity matches the markings on the unit. Replace the compartment door. Do not overtighten.

WARNING

Do not ingest the battery, Chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.”
CAUTION – RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

IMPORTANT SAFETY INSTRUCTIONS

Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference.

Do not use this product near water.
Unplug the unit and clean only with a damp cloth. Stronger cleaning agents, such as Benzene, thinner, or similar materials can damage the surface of the unit.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including ampliﬁers) that produce heat.
Only use attachments/accessories speciﬁed by the manufacturer.
Unplug this product during lightning storms or when unused for long periods of time.
Damage Requiring Service – This product should be serviced by qualiﬁed service personnel when:
– Plug has been damaged.
– Objects have fallen into or liquid has been spilled into the enclosure.
– The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.
– The unit exhibits a marked change in performance or does not operate normally.
No naked ﬂame sources, such as lighted candles, should be placed on this product.
Attention should be drawn to the environmental aspects of battery disposal. Many electronics retailers now recycle batteries and other electronic components at no charge. To ﬁnd a drop-off location near you, visit www.call2recycle.com
This product is suitable for use in tropical and/or moderate climates.

WARNING:
– To reduce the risk of ﬁre or electric shock, do not expose this product to rain or moisture.
– Do not dispose of batteries in the household trash or ﬁre.
– The main plug of the power adaptor is used as the disconnect device, it shall remain readily operable.

FCC Information
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules, the operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modiﬁcations to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
Model: iZBT3

ISED Information
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device complies with the ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
Any Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CAN ICES-3(B) / NMB-3(B)

WARRANTY

For product support information and warranty please visit: www.ihome.com/support

© 2021 SDI Technologies, Inc. All rights reserved.
Questions? Visit www.ihome.com
iZBT3 – QSG (English)
Size: 510 x 150 mm (folded 102 x 150 mm)
Material: 157g Art paper
Color: 1C + 1C (black)
Mar. 11, 2021