Fantem Technologies ZB006 In Wall Dimmer User Guide

Fantem Technologies ZB006 In Wall Dimmer User Guide

In-Wall Dimmer
In-Wall Dmmer, a Zigbee switch device controls on, off and, dim of any type of adjustable bulbs. It supports a variety of installations for wiring connection, such as 2-wire, 3-wire connection. Within the network, it works as a repeater to increase network reliability.

What’s included?

Familiarize yourself with your Dimmer

Description of terminals:
L – Power input for live
N – Power input for neutral
OUT – Output for load
COM – Common port for all external switches
Sl – External switch 1 control for load
S2 – External switch 2 for remote other Zigbee device

Installation: wiring diagram

Safety warning
Failure to follow the recommendations may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and/or reseller will not be held responsible for any loss or damage resulting from not following any instructions in this guide.

1. Risk of electrical shock. The main circuit breaker or fuse must be shut off during installation.
2. A licensed electrician with knowledge and understanding of electrical systems and safety should complete the installation.
3. The installation distance of the product is 20CM from human body.

a) 3-Wire connection (With Neutral)
Tips:

1. Without Bypass
   The minimum load is 5 watts

2. With Bypass
   The minimum load is 3 watts

b) 2-Wire connection (Without Neutral)

Tips:

1. Without Bypass
   The minimum load is 15 watts

2. With Bypass
   The minimum load is 5 watts

c) SPDT connection
(work with/Without Neutral)

Quick start

Download APP

1. Android phone download “Smart Life” from Google play store.
2. IOS phone: download ‘Smart Life” from Apple App store.

Adding In-Wall Dimmer into a Zigbee network

1. Power the Dimmer, LED will blink slowly. f LED is solid or OFF, please do a factory reset
2. Set your Zigbee gateway to “add subdevice” according to Figure 1.
3. Double-click the Action Button on your n-Wall Dimmer indicated by a LED blink If inclusion is a success, LED will lit solid. Otherwise, LED will blink slowly, in which case you need to repeat the process from step 2.

Remove In-Wall Dimmer from network

1. Make sure the In-wall Dimmer is connected to the power supply.

2. Press the Action Button 6 times quickly. If the exclusion is successful the LED on In-Wall Dimmer will blink faster, eventually blink slowly.
   However, if the In-Wall Dimmer widget is still in the APP, to remove the widget from the APP, please follow step 3.

3. Press the “disconnect” button on the edit page of the device in Smart Life APP according to Figure 2.
   Note: These operations don’t delete the configuration value..

Factory Reset

1. Make sure the In-Wall Dimmer has been connected to the power supply.

2. Press and hold the Action Button for 20 seconds, The LED on In-Wall Dimmer will blink incrementally fast and will be lit solidly for 2 seconds after the factory reset.
   However, n-Wall Dimmer widget is still in the APP. To remove the widget from APP, please follow step 3.

3. Press the “disconnect and wipe data” button on the edit page of the device in Smart Life APP according to Figure 2.
   Note: Factory Reset will reset the following settings:
   a) Remove In-Wall Dimmer from Zigbee network.
   b) Delete the association settings. c) Restore the default configuration settings include load type.

Advanced Functions

Identify external switch type
n-wall Dimmer work with some type of wall switches: momentary switch, SPST, SPDT, and rotating knob. Once the n-wall Dimmer is included in the network and if it does’nt control the load, you need to identify its type with the APP.

1. Select the correct switch type on the device edit page of the “Smart Life” on your APP.
2. Or you can let In-Wall Dimmer identify switch type as follows:
   2.1) Select generic switch type to set device into
   identification mode in the device edit page of “Smart Life” APP. Then toggle the external switch one time except for the rotating knob.
   2.2) fits rotating knob, rotate the switch anti-clockwise to start position, then set the device into identification mode in the device edit page of the “Smart Life” APP. Then, rotate switch clockwise to 1200

Identify load type
n-wall Dimmer can controls on, off and dim of multiple types of loads: incandescent halogen, dimmable LED (leading edge or trailing edge), dimmable CFL and Fans. And it still can turn on/off non-dimmable lamps: CFL LED.

Waste Electrical and Electronic Equipment (WEEE)
Information for the User
At the end of its useful life, the product marked with the crossed out wheeled waste bin must be disposed of separately from urban waste.

For more detailed information about disposal, contact the supplier that provided you with the product in question or consult the dedicated section at the website Fantem Technologies Co, Ltd.

Radio Technologies and Frequency Bands
In-Wall Dimmerincorporates the following radio technologies and supports the corresponding frequencies, as specified below:

Advanced Functions

Different load types need to be adapted to the correct dimming mode of the In- Wall Dimmer. Wrong dimming mode will damage n-Wall Dimmer.

Fortunately, n-Wall Dimmer can automatically identify the type of load and select the correct dimming mode. You just need to configure the power setting in the “smart Life” APP to set when n-Wall Dimmer will start to identify the load type. There are 3 options:

None: which means that does not identify the load type.
Power On Self Test: Which will start to identify the load type when In-Wall Dimmer is power on and the load type is unknown. This is the default value.
Power ON: which will start to identify the load type when power on each time.

Note:

1. In-Wall Dimmer can’t turn ON,OFF, and DIM the load before identifying the load type.
2. The light that connect to In-Wall Dimmer will turn on, then turn off to identify the load type when In-Wall Dimmer Power ON in first time.

External switch functions
There are 3 functions of an external switch that can be set in the “Smart Life” APP:
Control load: Just control the load that is connected to In-Wall Dimmen
Remote: Sends the status of a switch to the gateway, then gateway uses the status to trigger scenes or control other devices.
Both: To do both functions of control load and Remote at the same time.

Device update
In-Wall Dimmer can obtain new functions through upgrade firmware wirelessly. thus increasing the value of the In-Wall Dimmer in your smart home system.

Bypass
Bypass prevents LED and CFL bulbs from flickering when the LED or CFL has turn off. Connect it according to installation section.

Safety and regulatory information

WARNING
CHOKING HAZARD
This device may contain small parts which may be a choking hazard to children under 3. Keep small parts away from children.
WARNING
RISK OF ELECTRIC SHOCK

• More than one disconnect switch may be required to de-energize the equipment before servicing (Applicable to all switches without plugs and Dimmer products).

• DO NOT use this device near water and do not expose it to rain or moisture. DO NOT attempt to dry device with a hair dryer or a microwave oven.

• DO NOT attempt to take apart open, service, or modify the product, accessories, or power supply.
  Doing so could present the risk of electric shock or other hazard. Any evidence of any attempt to open and/or modify this device, including any peeling, puncturing, or removal of any of the labels, will void the Limited Warranty.

• DO NOT use any device in combination with a wall switch controlling a receptacle (Applicable to all switches without plugs and Dimmer products).

• Turn off main power at circuit breaker before installing or repairing before installing or servicing any In-Wall series products.

WARNING
RISK OF EXPLOSION
For devices that contain a built-in battery, improper use may result in exploson. Do not heat, open, puncture, mutilate, or dispose of the product in fire. Do not leave the device in direct sunlight for an extended period of time, which could cause melting or battery damage. The battery in these devices is not user replaceable and should only be replaced by Fantem or a Fantem Authorized Service
Provider. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

**WARNING
AC ADAPTER SAFTEY**
Failure to take the following precautions can result in serious injury or death from electric shock or fire or in damage to the device. To select an appropriate power source for your device:

• Use only the power supply unit, plug adapters, and AC power cord that came with your device or that you received from an authorized Fantem retailer.
• Do not use non-standard power sources, such as generators or inverters, even if the voltage and frequency appear acceptable. Only use AC power provded by a standard wall outlet.
• Do not overload your wall outlet extension cord, power strip, or other electrical receptacle. Confirm that they are rated to handle the total current (in amps IA) drawn by the device (indicated on the power supply unit) and any other devices that are on the same circuit
• On devices where the AC prongs may be folded for storage, before plugging the AC adapter into a power outlet, make sure its prongs are fully extended.
• On devices where the AC prongs are removable and where the power supply uses a universal adapter, before plugging the AC adapter into a power outlet make sure the prong assembly is of the proper configuration for the power outlet and fully seated into the adapter.

WARNING
CABLE AND CORD SAFETY
Arrange all cables and cords so that people and pets are not likely to trip over or accidentally pull on them as they move around or walk through the area. Do not allow children to play with cables and cords.

To avoid damaging the power cords and power supply:

• Protect the power cords from being walked on.
• Protect cords from being pinched or sharply bent, particularly where they connect to the power outlet, the power supply unit, and the device.
• Do not jerk, knot, sharply bend, or otherwise abuse the power cords.
• Do not expose the power cords to sources of heat.
• Keep children and pets away from the power cords. DO not allow them to bite or chew on them.
• When d’sconnecting the power cords, pull on the plug—do not pull on the cord.
• If a power cord or power supply becomes damaged in any way, stop using it immediately.
• Unplug your device during lightning storms or when unused for long periods of time.
• For devices with an AC power cord that connects to the power supply, always connect the power cord according to the following instructions:

Step 1: Plug the AC power cord into the power supply until it seats fully.
Step 2: Plug the other end of the AC power cord into the wall outlet.

WARNING
MAGNETS
Parts of some of the devices are are magnetic. They may attract metallic materials. To reduce the
potential risk of sparks, verify the electrical connection area is free of metallic objects before  interconnecting devices. In order to reduce the likelihood of magnetic fields interfering with
compass readings, disrupting the proper operation of pacemakers, or corrupting magnetically
stored data, do not place credit cards or other magnetic storage media or magnetically sensitive
devices near this device.

NOTICE
IN-WALL SERIES DIMMERS AND SWITCHES
Install only in a I-JL Listed junction box sized 3x2x2.75 inch or larger, minimum volume 14 in3 (230 cm3). Use copper conductors only.

Regulartory Warnings
FCC warnings
FCC Part 15.19 Warning statement
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

FCC Part 15.21 Warning Statement
NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT.

FCC Part 15.105 Warning Statement

Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference WII not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit d’fferent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
Th’s equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.

IC Warnings
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
The device has been evaluated to meet general RF exposure requirement. To maintain compliance with RSS- 102 — Radio Frequency (RF) Exposure guidelines, this equipment should be installed and operated with a min-mum distance of 20cm between the radiator and your body.

Disposal of waste batteries and electronic equipment
This symbol on the product or its batteries or its packaging means that this product and any
batteries it contains must not be disposed of with your household waste. Instead, it is your
responsibility to hand this over to an applicable collection point for the recycling of batteries and
electrical and electronic equipment.

This separate collection and recycling will help to conserve natural resources and prevent potential negative consequences for human health and the environment due to the possible presence of hazardous substances in batteries and electrical and electronic equipment, which could be caused by inappropriate disposal. For more information about where to drop off your batteries and electrical and electronic waste, please contact your local city/municipality office, your household waste disposal service, or the shop where you purchased this product.

Simplified EU Declaration of Conformity
Hereby, Fantem Technologies Co, Ltd. declares that the radio equipment type In-Wall Dimmer
is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.fantem.com

Fantem Technologies Co, Ltd.
North,3/F,Yitoa Technology Industrial Park, Baihua Yuan
Rd., Guangming District, Shenzhen, Guangdong, China
Should you encounter any problem with Multisensor, contact our support team via sales@fantem.com.

EUREP GmbH
Unterlettenweg la
85051 Ingolstadt
Germany
Tel: +49 841 9376 4648

Specifications

Get help & learn more
Should you encounter any problem with In-Wall Dimmer, contact our support team via sales@fantem.com.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>