Brio 30234 Play & Learn Action Racer Instructions

: October 27, 2023
: BRIO

Table of Contents

30234 Play & Learn Action Racer
Installing and replacing batteries:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Play & Learn Action Racer
30234

Brio 30234 Play & Learn Action Racer

30234 Play & Learn Action Racer

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Brio 30234 Play & Learn Action Racer - Fig 1

Battery operated play functions: A playful motorized cause & eﬀect play that stimulates ﬁne motor skills and hand/eye coordination when the child pushes the buttons to steer the Race Car in diﬀerent directions. Press one of the four direction buttons on the car’s dashboard. These age-appropriate designed buttons send the car in four diﬀerent directions; forward (1), to the right (2), to the left (3) and reverse (4).

Before using the Action Racer:
– Install the batteries according to the picture and instruction below.
– Switch on the car by pushing the switch button to the ON position on the bottom of the car, see illustration.
– Press any of the four buttons on top of the car and race!

Keep in mind that:
– For best results, always play with the toy indoors on a clean, ﬂat surface.
– The child’s hair can easily get caught in moving parts.
– The toy is not water-resistant and shall not be washed in a dishwasher.
– Wipe oﬀ the toy with a clean dry cloth to remove any foreign materials.
– The toy shall not be disassembled for safety reasons.
– The plastic in the toy can fade over time, avoid strong sunlight and other heat sources.

Please visit our website at brio.net for more information on how to care for your prized BRIO toy.

Brio 30234 Play & Learn Action Racer - Fig 3

Installing and replacing batteries:

This Action Racer is powered by 4 x AAA 1,5V batteries (not included). Use a screwdriver to open the battery cover and loosen the safety screw (A). (see illustration).
Install the batteries as shown (+/–). Close the battery cover by tightening the safety screw (see illustration).

Important:

Only adults should install and replace batteries.
Diﬀerent types of batteries or new and used batteries are not to be mixed.
Only recommended batteries of the same or equivalent type as recommended (1.5V) are to be used.
Batteries are to be inserted with the correct polarity.
Exhausted batteries are to be removed from the toy.
The supply terminals are not to be short-circuited.
Always remove batteries if the toy is not to be used for some time.
Protect the toy from water or dampness.
Do not attempt to recharge non-rechargeable batteries..
Rechargeable batteries are to be removed from the toy before being charged.
Rechargeable batteries are only to be charged under adult supervision.
Used batteries and electrical components must be disposed of at an approved collection point.
Electrical components or batteries must not be thrown with household waste.