Shenzhen Fuhaoxuan Technology WLX-X9 Type-C 18W 8 Ports USB Fast Wireless Charger User Manual

Shenzhen Fuhaoxuan Technology WLX-X9 Type-C 18W 8 Ports USB Fast Wireless

Charger User Manual

Model: WLX-X9

Thank you very much for purchasing our USB smart charger. Please read carefully before using this product Keep this manual in a safe place for future reference.

Product Model: WLX-X9

Product Features

1. PD 18W + QC3.0 18W + 4-port USB has 6 charging ports, which can charge 6 devices at the same time, the total power is 100W. The total power exceeds 100W and the power supply will stop working.
2. The LCD screen automatically goes out after 1 minute of charging the device.
3. Built-in inductive sensor, when the charger receives a vibration signal, the LCD screen lights up.
4. The display can display the current and voltage of each port in real time.
5. Built-in intelligent protection system: over-voltage, over-heat over-current protection, effectively prevent accidents, stability and safety.

Product Parameters

1. Color. Rubber black/Ceranic white.
2. Total output voltage: DC 5V / 20A /100W(maximum).
3. Input voltage: AC 100-240M 50-60Hz
4. Power cord length: 12 metes.
5. Bare metal size: 110 80 45mm.
6. wireless charging: 15W

Warranty Content

1. The warranty scope of the product produced by the company.
2. All products of the company are guaranteed for one year from the date of sale;
3. Failures caused by the normal use warranty period can be submitted to the company for after-sales service a:cording to the terms of this warranty
4. The reasons for product damage are as followers, the company does not provide.

Warranty service:

1. Forging and copying the company’s product
2. Accidental factors or man-made damage;
3. Man-made damage, water ingress mechanical damage, damage, personal dismantling etc
4. Appearance wear and scratch deformation.
5. The company will retain the final interpretation light

Precautions

1. The charger is 100W, which can charge 8 1-2A mobile phones at the same time. Each charger has a different current as long as the total current does not exceed 100W, it can be used normally. When the total current exceeds 204, the charger will be in over current protection state, the indicator will flash (the charger will stop working), immediately unplug the data cable to reduce the charging device automatically reset after about 5 minutes, after re -plugging Can be used normally.
2. Do not apply external force or drop it from a height.
3. The charger generates a certain amount of heat during operation, so do not use it in a closed and  non-ventilated environment

1. Fast charging base
2. Quick charge tips
3. Multi—function charger
4. Shows the port being charged
5. work indicating lamp
6. overload warning
7. output current
8. These 6 interfaces are 5V quick charging interfaces
9. QC3.O quick charge interface
10. PD18W quick charge interface

Note: This product has the function of turning off the screen. if it is not affected by external movement or reseating,  the screen will go out automatically after about 100 seconds, but when there is movement around or reseat,  the screen will light up automatically. The product has a built-in jitter switch, so there will be a rustling sound  when the product is shaking, which is a normal phenomenon. Thank you for using it!

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not  cause harmful interference, and (2) this device must accept any interference received, including interference that may cause  undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of  the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential  installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance  with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that  interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the  equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s  authority to operate the equipment

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>