AXIS A4020-E RFID Reader Installation Guide

AXIS A4020-E RFID Reader Installation Guide

AXIS A4020-E-Reader

Installation Guide

• Read this first
  Read through this Installation Guide carefully before installing the product. Keep the Installation Guide for future reference.

• Liability
  Every care has been taken in the preparation of this document. Please inform your local Axis office of any inaccuracies or omissions. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material. This product is only to be used for its intended purpose.

• Intellectual property rights
  Axis AB has intellectual property rights relating to technology embodied in the product described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the patents listed at axis.com/patent and one or more additional patents or pending patent applications in the US and other countries.

• Equipment modifications
  This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no user- serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals.

• Trademark acknowledgments
  AXIS COMMUNICATIONS, AXIS, ARTPEC, and VAPIX are registered trademarks of Axis AB in various jurisdictions. All other trademarks are the property of their respective owners.

• Electromagnetic Compatibility
  (EMC) Directive 2014/30/EU. See Electromagnetic Compatibility (EMC) on page 2 .

• Contact information

• Axis Communications Inc. 300 Apollo Drive Chelmsford, MA 01824 United States of America Tel: +1 978 614 2000

• Canada
  This digital apparatus complies with CAN ICES-3 (Class B). The product shall be properly grounded. Cet appareil numérique est conforme à la norme CAN NMB-3 (classe B). Le produit doit être correctement mis à la Terre.

• Europe
  This digital equipment fulfills the requirements for RF emission according to the Class B limit of EN 55032. The product shall be properly grounded.

• Radio transmission
  This equipment may generate or use radio frequency energy. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

• USA
  This product complies with FCC radiation exposure limits for an uncontrolled environment.

• Canada
  This device complies with Industry Canada

Requirements for compliance with UL294 7th edition

This section contains information and instructions required for UL compliance. To make sure the installation is UL compliant, follow the instructions below in addition to the general information and instructions provided throughout this document. In cases where pieces of information contradict each other, the requirements for UL compliance always replace general information and instructions.
For use with the UL294 listed AXIS A1601 Network Door Controller.
Safety instructions

•  The Axis product shall be installed and serviced by a factory-trained professional.

•  All wiring methods shall be performed in accordance with ANSI/NFPA 70, local codes, and authorities having jurisdiction.

•  Recommended test method: Verify that the card reader reads cards and provides access.
  est frequency: once a year.

•  There are no replacement parts available for this product.

•  For UL294 compliant installations, the AXIS A4020-E-Reader should be powered by either an AXIS A1601 Network Door Controller or a UL294 listed power supply. All interconnecting devices hall be UL listed and Class 2 low-voltage power limited.

•  DC input evaluated for UL294: 12 V DC

Impaired operation

• The following conditions could result in the impaired operation of the reader:
• The reader can have difficulties reading cards at very low temperatures. The access cards are normally specified to -35° C (-31° F) and should be warmed up if the reader is installed in cold
• • surroundings. The reader can only read one card at a time. Sheet metal behind the access card can result in impaired antenna function and prevent the reader from reading the card. Too low voltage will impair the function of the reader.
    Firmware version
    AXIS A4020-E-Reader has been tested for compatibility with the UL294-listed AXIS A1601 Network Door Controller employing major firmware version 1. Equivalent to other Axis door controllers with major firmware version 1, as well as UL component version 1 in other Axis door controller firmware.
    Performance levels for access control
    This section contains performance level information required for UL 294 compliance. Feature| Level
    ---|---
    Destructive attack test| I
    Security| I
    Endurance| IV
    Standby power| I

Wire area

NOTE: Each wire shall have a conductor cross-sectional area that corresponds to a conductor gauge range of AWG 26–18. Select cables in compliance with your local regulations.

• When switch 1 and 2 are both set to Off, you can use the command

osdp_COMSET to change the address.

Safety information

DANGER: Indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING: Indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
NOTICE:

•  The Axis product shall be used in compliance with local laws and regulations.
•  Store the Axis product in a dry and ventilated environment.
•  Avoid exposing the Axis product to shocks or heavy pressure.
•  Do not install the product on unstable poles, brackets, surfaces, or walls.
•  Use only applicable tools when installing the Axis product. Using excessive force with power tools could cause damage to the product.
•  Do not use chemicals, caustic agents, or aerosol cleaners.
•  Use a clean cloth dampened with pure water for cleaning.
•  Use only accessories that comply with the technical specification of your product. These can be provided by Axis or a third party. Axis recommends using Axis power source equipment compatible with your product.
•  Use only spare parts provided by or recommended by Axis.
•  Do not attempt to repair the product yourself. Contact Axis support or your Axis reseller for service matters.

References

• Axis Communications - Leader in network cameras and other IP networking solutions | Axis Communications
• Learning | Axis Communications
• Patent statement | Axis Communications
• Welcome to Axis support | Axis Communications
• Anatel — Agência Nacional de Telecomunicações

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>