Gas Masks 6502QL Respirator Mask with Filters Instructions

Table of Contents

6502QL Respirator Mask with
Filters Instructions

Half Face Respirator

Cleaning

Remove cartridges and/or filters.
Clean facepiece (excluding filters and cartridges). By immersing in warm cleaning solution, water temperature not to exceed 120’F. and serub with soft brush until clean.
Rinse in fresh. warm water and air dry in non-contaminated atmosphere.
The cleaned respirator should be stored away from contaminated areas when not in use.

Attention

The cartridge or filter should be changed regularly according to the operating environment.
The respirator should be cleaned and maintained regularly.
Check before using each time to ensure its function is intact. If it is damaged, it should be discarded immediately.
The respirator should be kept in a ventilated and cool place to avoid the environment of high temperature, sunlight, high humidity and ultra-low temperature.
The filter shall be kept in a sealed package, and the validity period of the filter in an unopened state is 5 years.

Important
Before use, the wearer must read and understand these User Instructions.

Instructions and restrictions shall be followed during use. Improper use may affect the efficacy of respirators and may result in sickness or death.
Training on proper use of the respirator should be conducted/received before use.
Leave contaminated area immediately if you smell or taste contaminants or it dizziness, suffocated, or other distress occurs.
Store respirator away from contaminated areas when not in use.

This respirator does not supply oxygen. Do not use in atmospheres containing less than 19.5% oxygen.
If the type or concentration of pollutants is unknown, or the type or concentration of pollutants exceeds the protection object or concentration range of this respirator, this respirator is not allowed to be used.
Do not alter, abuse or misuse this respirator.

Warm Tips

The respirator itself has no smell. Some customers may be more sensitive to smell. You can clean the facepiece (excluding filters and cartridges) to eliminate odors or place it in a ventilated place to release the peculiar smell.

Align the cartridge or filter notch with facepiece mark.
Turn cartridge or filter 1/4 turn clockwise to stop. To remove cartridge, turn 1/4 turn counter clockwise.
Repeat with second cartridge or filter.

Put the headband rack on the back of the head, pull back the buckle of the elastic band, and make the respirator buckle the mouth, nose and chin.
Pull the lower elastic band to the back of the neck, tighten the fasteners and adjust the length of the elastic band to make the face comfortable.
Breathe vigorously, check the leakage between the respirator and the face, and adjust to the ideal state.
If the sealing state is not ideal, do not enter the contaminated area, and re-adjust or replace the respirator.
60926 Cartridge: It can protect a variety of gases, and can protect oily particles and non-oily particles

Read User Manual Online (PDF format)