JOYHOOSH K6 True Wireless Earbuds User Manual

K6 User Manual

Product overview

Make sure your wireless headset is equipped with the following items.

A pair Of L&S Size Eartips Type-c Charging Cable Product Instructions

Function Operation

Long press touch
Match| Search the pairing name in the phone setting options window for pairing| | Red and blue lights flash alternately
Connection| Click on the pairing name: K6| | LED light off
Disconnect| Phone settings option window unpairing name| | Red and blue lights flash alternately
Shut- down| | Put it back into the charging box, the earphone will be disconnected automatically in the charging state, and the light will be off after fully charged| | Charging status, red light is on when fully charged,the light automatically goes out
Automa ical connect back| The left and right earphones are directly taken out of the charging box, automatically paired and connected back to the paired devices| | LED light off
Low power| The battery voltage is lower than 3.3v, report a low battery prompt every 30 seconds| |
Status| Charging| DC 5V/0.5-1A| | Red light on
After fully charging| DC 5V/0.5-1A| | The light off automatically
Headphone reset| Put the headset back into the charging box| | Red light on
Charging In the charging compartment| The digital display shows the battery percentage| |
Charging comport- moot discharge| Display batten/ icon marquee on the left and right sides of the screen| |

Function Operation

with the smartphone, touch the earbuds 5 times and the red LED indicator flashes 3 times, then turn it off to complete the factory setting.

Shape And Size

Special Note

Please choose the most suitable and comfortable eartips for the best auditory experience.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

service@joyhoosh.com
Scan the QR Code below for 1 Year Guarantee.

service@joyhoosh.comApply/1Year/Guarantee/from/Joyhoos/hDearCustomer,Thank.youfor.choosing our.products,senduse-mailnowtoapply 1 year guarantee.
Thankyou.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>