EZVIZ DB1 Pro Wi-Fi Video Doorbell User Manual

**EZVIZ DB1 Pro Wi-Fi Video Doorbell User Manual

**

Box Contents

Doorbell (x1)

Mounting Plate (x2) Pick the one for best surveillance angle.

Plate Foam (x1) Stabilize the mounting plate when installing it on the rough surface.

Power Kit (x1)

Drill Bit (x1)

Screwdriver (x1)

Mounting Screw (x3)

Anchor (x3)

Security Screw (x1)

Fixing Screw (x2)

Wire Connector (x4)

Wire Harness (x1)

Fuse Wire (x1)

U-shaped Wire (x2)

Regulatory Information (x2)

Quick Start Guide (x1)

Tools You May Need

Drill (x1)

Basics

• Solid Red: Doorbell is starting up.
• Slow-flashing Red: Network disconnected.
• Fast-flashing Red: Doorbell exception (e.g. Micro SD card error).

Blue

• Solid Blue: Doorbell is functioning properly.
• Fast-flashing Blue: Doorbell is ready for Wi-Fi connection.

Reset Button| Hold for 5 seconds to reset and enter to Wi-Fi configuration mode.

using it.

Get the EZVIZ App

1. Connect your mobile phone to Wi-Fi (suggested).
2. Download and install the EZVIZ app by searching “EZVIZ” in the App Store or Google Play™.
3. Launch the app and register an EZVIZ user account
   
   If you have already used the app, please make sure that it is the latest version. To find out if an update is available, go to the app store and search for EZVIZ.

Wiring Overview

EZVIZ doorbell with chime

If you have mechanical chime or electronic chime installed in your home, install the power kit and doorbell, and connect the wires as shown in the figure below.
Mechanical Chime / Electronic Chime

EZVIZ doorbell with no chime
If no chime is installed, skip power kit installation, install the doorbell, and connect the wires as shown in the figure below.
Doorbell

• We recommend installing a new transformer to bring the output 16 to 24 volts.
• Please refer to Quick Start Guide of your chime or transformer for the chime or transformer installing details.

Power Kit Installation

The power kit ensures that your doorbell gets the power it needs, so be sure to install it before you install your Doorbell.

1. Shut off the electricity at the breaker that controls doorbell’s circuit.

2. Insert one end of the wire harness into the power kit.

3. Remove the cover from your mechanical chime.

4. Remove the existing chime wires in the terminals named TRANS and FRONT.

5. Connect the wire harness to the chime’s terminals named TRANS and FRONT.

6. Insert the existing chime wire and the other end of the wire harness into the wire connector and twist it tightly. Repeat this step with the other chime wire.

7. Mount the power kit to the side of the chime.

8. Put back the chime cover.

Doorbell Installation

Recommended Installation Height: 1.2 m (4 ft) above the ground.

1. Shut off the electricity at the breaker that controls doorbell’s circuit.

2. (Optional) When the wall is uneven, paste the plate foam to the mounting plate

3. Use the mounting plate, or use the inclined mounting plates as a supplementary mounting bracket if you wish to see more on a specific side.
   Using your mounting plate as a template, mark the location of the two mounting holes on your wall, and insert anchors, then fix the mounting plate to the wall.
   Without Inclined Mounting Plate

With Inclined Mounting Plate

Recommended Hole Depth: 25 to 30 mm (1 inch to 1.2 inch).

4. If you have a chime installed, follow Option A; If not, follow Option B. Option A Connect doorbell with your existing doorbell wires.
   Power Supply: 16 to 24 VAC

5. 
   Option B Connect the fuse wire with your existing doorbell wire.
   Power Supply: 16 to 24 VAC
   

6. Install the doorbell to the mounting plate.

7. Insert the security screw into the top of the mounting plate to secure the doorbell.

8. Restore the electricity at the breaker.

Doorbell is powered on when its indicator flashes blue quickly. If not, make sure your electricity is off and check the wiring. If yes, proceed to doorbell setup.

Doorbell Setup

1. Add your doorbell to EZVIZ app.
2. Remove the faceplate of the doorbell.
3. Log in to your EZVIZ account.
4. On the Home screen, tap “+” on the upper-right corner to go to the Scan QR Code interface.
5. Scan the QR code on the device or the cover of this quick start guide when the indicator flashes blue quickly.
6. Follow the wizard to add the doorbell to the EZVIZ app.
7. Put the faceplate back.
8. Choose the corresponding chime type.
9. In the EZVIZ app, tap the Chime Type in the Device Settings interface to go to the Chime Type interface.
10. Choose the chime type which you have installed in your home.

Install the Micro SD Card (Optional)

1. Remove the cover on the side of the doorbell with the screwdriver.
2. Insert a micro SD card (sold separately) into the slot until a click.
3. Place the cover back on, and tighten the screws with the screwdriver.
   After installing the micro SD card, you should initialize the card in the EZVIZ app before using it.

Initialize Micro SD Card

1. In the EZVIZ app, tap the Storage Status in the Device Settings interface to check the micro SD card status.
2. If the card status displays as Uninitialized, tap to initialize it.
3. The status will then change to Normal and it can store videos.

View Your Device

The app interface may be different due to version update, and the interface of the app you installed on your phone shall prevail.

Live View

When you launch the EZVIZ app, the device page displays as shown below.
You can view and listen to a live feed, take snapshots, record videos, and choose video definition as needed.
Swipe left and right across the screen to see more icons

Please refer to the actual interface for specific information.

Settings

In the settings page, you can set the parameters of the device

will have audio
Status Light| You can tell device status by different lights shining. When disabled, lights will be off
IR Light| IR light helps the camera get black and white images in low light conditions. If disabled, quality of images captured in dark environments will be influenced.
Alarm Notification|

• Alarm Notification: You can select different detecting modes and the device will give out alarms accordingly. When enabled, you will receive notifications 24/7 with no Notification Schedule set.
• Notification Schedule: When enabled, the device will turn the message push notification on/off according to your scheduled settings.
• Set Notification Schedule: You can set your notification schedule here.
• Motion Detection Area: You can select detection area here.
• Motion Detection Sensitivity: You can select detection sensitivity here.
• Select the mode: You can select 3 different modes here. If you choose the former two modes, an audible warning will  be prompted if the device detects motion of people or animals.

Time Zone| You can select time zone as needed here.
Daylight Saving Time| Select daylight saving time as needed.
Date Format| You can select date format as needed here.
Wi-Fi| You can see the Wi-Fi that the device has been connected to, and you can tap to connect another Wi-Fi.
Cloud Storage| You can subscribe cloud storage here.
Storage Status| You can see the storage status of your cloud and memory card here.
Device Version| You can see the device version here.
Image Encryption| If enabled, images captured by the device can only be avaliable after you enter a password.
Change Encryption Pass word| You can change your encryption password here. The default password is the device verification code.
Offline Notification| If enabled, notifications will be pushed to your app once the doorbell is offline
User Guide| You can read user guide of the device here.
About| You can mark where the device is installed, and get product category, device model, serial number, and device QR code here.
Delete Device| Tap to delete the device from your EZVIZ account.
For privacy protection, please remove SD card or other storage media(if any)when transferring the device to others.

EZVIZ Connect

Use Amazon Alexa

These instructions will enable you to control your EZVIZ devices with Amazon Alexa. If you run into any difficulties during the process, please refer to Troubleshooting.

Before you start, make sure that:

1. EZVIZ devices are connected to the EZVIZ app.
2. In the EZVIZ app, turn off the “Image Encryption” in the Device Settings page.
3. You have an Alexa-enabled device (i.e Echo Spot, Echo-Show, All new Echo-Show, Fire TV (all generations), Fire TV stick (second generation only), or Fire TV Edition smart TVs).
4. The Amazon Alexa app is already installed on your smart device, and you have created an account.

To Control EZVIZ devices with Amazon Alexa:

1. Open the Alexa app and select “Skills and Games” from the menu.

2. On the Skills and Games screen, search for “EZVIZ”, and you will find “EZVIZ” skills.

3. Select your EZVIZ device’s skill, then tap ENABLE TO USE.

4. Enter your EZVIZ username and password, and tap Sign in.
   Tap the Authorize button to authorize Alexa to access your EZVIZ account, so that Alexa can control your EZVIZ devices.

5. You will see “EZVIZ has been successfully linked”, then tap DISCOVER DEVICES to allow Alexa to discover all your EZVIZ devices.

6. Go back to Alexa app menu and select “Devices”, and under devices you will see all your EZVIZ devices.

Voice Command

Discover a new smart device via the “Smart Home” menu in the Alexa app or the Alexa Voice Control function.
Once the device is found, you can control it with your voice. Speak simple commands to Alexa.

Your device’s name for example: “show xxxx camera,” can be changed in the EZVIZ app. Each time you change the name of the device, you will need to discover the device again to update the name.

Troubleshooting

What should I do if Alexa fails to discover my device?

Check if there are any Internet connecting problems.
Try to restart the smart device and re-discover the device on Alexa.

Why the device’s status is “Offline” on Alexa?

Your device might have been disconnected from the network. Restart the smart device and re-discover on Alexa.
Check if your router is connected to the Internet and try again.

For details about countries where Amazon Alexa is available, see Amazon Alexa’s official website.

Use Google Assistant

With the Google Assistant, you can activate your EZVIZ device and watch live by speaking Google Assistant voice commands.

The following devices and apps are required:

1. A functional EZVIZ app.
2. In the EZVIZ app, turn off the “Image Encryption” and turn on the “Audio” in the Device Settings page.
3. A TV with functional Chromecast connecting to it.
4. The Google Assistant app on your phone.

To get started, follow the steps below:

1. Set up the EZVIZ device and make sure it works properly on the app.
2. Download the Google Home app from the App Store or Google Play StoreTM and log into your Google account.
3. On the Myhome screen, tap “+” on the upper-left corner, and select “Set up device” from the menu list to go to the Set up interface.
4. Tap Works with Google, and search for “EZVIZ”, where you will find “EZVIZ” skills.
5. Enter your EZVIZ username and password, and tap Sign in.
6. Tap the Authorize button to authorize Google to access your EZVIZ account, so that Google can control your EZVIZ devices.
7. Tap Return to app.
8. Follow the above steps to complete the authorization. When synchronization is completed, EZVIZ service will be listed under your list of services. To see a list of compatible devices under your EZVIZ account, tap on the EZVIZ service icon.
9. Now try some commands. Use the name of the camera that you created when you set up the system.

Users can manage devices as a single entity or in a group. Adding devices to a room allows users to control a group of devices at the same time using one command.
See the link for more information:
https://support.google.com/googlehome/answer/7029485?co=GENIE.Platform%3DAndroid&hl=en

Troubleshooting

I have installed my doorbell, but the chime in my home doesn’t function.

Please confirm the following details.

1. Make sure the right input voltage range (16V to 24V) has been used. Your doorbell is designed to work with at least 16 volts of AC power, which is in line with a majority of standard doorbell systems. Doorbell running at a lower voltage (or runs on DC rather than AC) may cause chime malfunction.

2. Select the right chime type (same as the product label) in the EZVIZ app.

3. Make sure the chime model used in your home is compatible with the doorbell. Please check the compatibility list on
   www.ezvizlife.com.

4. By any possibility exhaustion of the Doorbell’s built-in battery, please power up the doorbell for at least 30 minutes before using it for the first time.

I have failed to connect my doorbell to Wi-Fi.

1. Make sure your doorbell is not blocked by firewall or any limitation in your network.
2. Do not connect too many devices to the router.
3. Make sure the static IP setting is disabled and the router can distribute IP address to your device (DHCP is on).

My doorbell is offline frequently.

1. Make sure the doorbell has received strong and stable Wi-Fi signal.
2. Make sure your router and the internet is functional.
3. The doorbell requires at least 2 Mbps uploading speed, please make sure the bandwidth of the network is sufficient, and do not have too many devices connected to the router.
4. If all the troubleshooting techniques listed above does not resolve the problem, please delete the device from your EZVIZ account, reset and re-add.

For additional information about the device, please refer to www.ezvizlife.com.

COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd.. ALL RIGHTS RESERVED.

Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as “EZVIZ”). This user manual (hereinafter referred to as “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of EZVIZ. Unless otherwise stipulated, EZVIZ does not make any warranties, guarantees or representations, express or implied, regarding to the Manual.

About this Manual

The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the
 website (http://www.ezvizlife.com).
Revision Record
New release – January, 2021

Trademarks Acknowledgement

, , and other EZVIZ’s trademarks and logos are the properties of EZVIZ in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE  LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZ’S TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT.
EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE AS THE RESULT OF PRODUCT INTERRUPTION OR SERVICE TERMIN TION CAUSED BY: A) IMPROPER INSTALLATION OR USAGE OTHER THAN AS REQUESTED; B) THE PROTECTION OF NATIONAL OR PUBLIC INTERESTS; C) FORCE MAJEURE;
D) YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT LIMITATION, USING ANY THIRD PARTY’S PRODUCTS,
SOFTWARE, APPLICATIONS, AND AMONG OTHERS.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS AND DATA PROTECTION LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. EZVIZ SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATTER PREVAILS.

References

• EZVIZ - Creating Easy Smart Homes

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>