Shenzhen Qichip Technology QX-001 Battery Free Wireless Doorbell Instructions
- June 6, 2024
- Shenzhen Qichip Technology
Table of Contents
QX-001 Battery Free Wireless Doorbell
Instructions Manual
Product Description:
1. Product Features:
Battery-free wireless doorbell, driving wirelesssignal by pressing power
generation, no battery, no wiring, simple installation, green and
environmental protection, the appearance is minimalist design, simple and
generous, and the shape is round and beautiful.
QX-001 FS can be used with receiving devices such as wireless receivers/smart switches for remote control of electrical equipment, which can easily realize single control, dual control, multiple control and mutual control. It is not only an application doorbell, but also can be used in various fields such as switches and pagers.
2. Product diagram:
3. Technical parameter
QX-001 Technical parameter:
User Instruction
1. Pairing: When the QX-001JS receiver is in the power-on state, the
indicator light is always on, then it is in the pairing mode. Press the BM3FS
button once, the indicator light flashes and the pairing is successful. Up to
5 transmitters can be matched. You can also pair it yourself as shown below.
When the receiver has paired 5 switches and then paired with the new switch,
it will automatically replace the first switch.
(1 ).The receiver has just pressed the pairing button for 3 seconds within 1
minute of power-on.
(2). When the blue light on the receiver is always on, enter the pairing mode.
(3). Press the transmitter, the blue light flashes on the receiver, and the
pairing is successful.
2. Clear the pair code: If the receiver is just pressed for 1 minute, press and hold the button on the receiver, until the indicator light is on, then flash 3 times, all the code is cleared.
(1 ). After the receiver is powered on, press and hold the pairing button within 1 minute, until the blue light is always on and flash 3 ti9:es, and the clearing is successful.
3. The song returns to the first one the receiver can hear the first ringtone by long pressing the “Volume Adjustment and Back button” while the power is on.
4. Song selection: The receiver can replace the built-in 38 songs in sequence by pressing the “Pairing and Choosing” button while power is on.
5. Press the volume button in turns to adjust the volume, There are three volume range: high, moderate, and low.
QX-001 FS Install Instruction:
The QX-001 FS transmitter can be placed or moved at will, or it can be fixed in your favorite position.
1. Method 1 (double-sided stickers): Remove one side of the double-glue sticker and stick it to the bottom of the transmitter , then tear the other side of the double-glue sticker and stick it on the wall or glass. Then the installation completed.
Tip: Please avoid installing on metal objects (iron gates, iron windows, etc.) to avoid affecting the launch distance. Please try it before fixed transmitter.
2. Method 2 (screw mounting): optional accessories As shown, the bottom cover bracket is first screwed to the wall, then slide the transmitter into place.
Tip: Please avoid installing on metal objects (iron gates, iron windows, etc.) to avoid affecting the launch distance. Please try it before fixed transmitter.
Fault analysis and troubleshooting
- No sound: Check whether receiver socket is powered on.
- Short transmission distance: Some objects, such as iron doors and iron frames, walls or ceilings will affect the efficiency of transmission distance. Please avoid the transmitter and receiver near these objects.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.