JBC PA120 Micro Tweezers Instruction Manual
- June 10, 2024
- JBC
Table of Contents
JBC PA120 Micro Tweezers
Product Information
The PA120 Micro Tweezers is a precision tool used for soldering and desoldering electronic components. This tool is compatible with the C120 cartridge range and is sold separately from the DDE 2-Tool Control Unit, AMS Stand for PA120 & AM120 Micro Tweezers, and C120 Cartridges. The maximum power per cartridge is 40W and it complies with CE standards for ESD safety. The product comes with a 2-year warranty against manufacturing defects, excluding product wear or misuse.
Product Usage Instructions
- Ensure that the PA120 Micro Tweezers are compatible with the C120 cartridge range.
- Unlock the fixing screws to remove the old cartridge.
- Insert the new cartridge into the extractor and pull the tweezers to remove the cartridge.
- Use the grooves to insert the new cartridge as far as the mark.
- Lock the fixing screws to secure the new cartridge in place.
- If the tool is not functioning properly, return it to the dealer where it was purchased for warranty coverage.
- Do not throw the product in the garbage. Recycle it at an authorized recycling facility in accordance with European directive 2012/19/EU.
This manual corresponds to the following reference:
PA120-A
Packing List
The following items are included:
Connections
Changing Cartridges
*Important
It is essential to insert the cartridges as far as the mark for a proper
connection.
Compatible cartridges
The PA120 works with C120 cartridge range. Find the model that best suits your soldering needs at www.jbctools.com
Specifications
PA120
Micro Tweezers
Ref. : PA120-A
- Maximum Power Per Cartridge : 40W
- Total Net Weight: 99 g / 0.218 lb
- Package Dimensions/Weight: 277 x 73 x 50 mm / 165.5 g. (L x W x H) 10.91 x 2.87 x 1.97 in / 0.365 lb
Complies with CE standards
ESD Safe
Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at
the end of its life must be collected and returned to an authorized recycling
facility.www.jbctools.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>