iHOME iWBTW200 Timebase Pro+ Bluetooth Alarm Clock with Wireless Charger Instruction Manual
- June 6, 2024
- iHome
Table of Contents
TIMEBASE PRO+
Model: iWBTW200
WIRELESS CHARGING
Supports: Qi-compatible phones (also works with plastic cases up to 3mm
thick*)
Place Qi-compatible device facing forward on the charging rest. Charging
status will be indicated on the LED located under the iHome badge:
Rapid blinking LED:
Slow blinking LED:
Solid LED:| The device is not charging (reposition device)
Device is charging
The device is fully charged
---|---
Note: Qi status LED may continue to blink slowly (indicating charging)
for iOS devices that are fully charged.
CAUTION: Not all cases are wireless charging compatible. Remove the
phone’s metal protective case before charging. Do not place magnetic or metal
objects on the charger during charging.
- Some larger size phone cases may not be able to charge. (Please remove the case to charge the phone properly.)
For questions, full instructions, warranty, and additional
safety information, please scan the QR code or visit:
www.ihome.com/help/iwbtw200
FCC Information
This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body.
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.
This device complies with Part 15 of the FCC Rules, the operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
-
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
ISED Information
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment.
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
The device complies with the ISED RF exposure requirement, users can obtain
Canadian information on RF exposure and compliance.
This equipment should be installed and operated with a minimum distance of 20
cm between the radiator and your body.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
CAN ICES-3 (B) / NMB-3(B), CAN RSS-216 / CNR-216
WARNING
-
Do not ingest the battery, Chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
-
Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.”
-
The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable”
-
CAUTION – RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS. -
The socket outlet shall be installed near the equipment and shall be easily accessible.
IMPORTANT SAFETY INSTRUCTIONS
Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference.
-
Do not use this product near water, and clean only with a dry cloth.
-
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
-
Only use attachments/accessories specified by the manufacturer.
-
Unplug this product during lightning storms or when unused for long periods of time.
-
Damage Requiring Service – This product should be serviced by qualified service personnel when:
– Plug has been damaged.
– Objects have fallen into or liquid has been spilled into the enclosure.
– The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.
– The unit exhibits a marked change in performance or does not operate normally. -
No naked flame sources, such as lighted candles, should be placed on this product.
-
Attention should be drawn to the environmental aspects of battery disposal.
-
This product is suitable for use in tropical and/or moderate climates.
-
WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
-
Do not dispose of batteries in the household trash or fire.
© 2021 SDI Technologies, Inc.
All rights reserved
iWBTW200_IS_101821-D
Printed in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>