Palment Enterprises PGRSSERIES001 Queue Wireless Calling System User Manual
- June 6, 2024
- Palment Enterprises
Table of Contents
**Palment Enterprises PGRSSERIES001 Queue Wireless Calling System User Manual
**
Summary
Thank you for choosing the queue wireless calling system. The revolutionary paging system provides the best solution to avoid long waiting lineup. It will help tremendous users to reducelabor cost and improve the efficiency. The frequent using scenarios are restaurant, cafe, food court, auto shop, clinic, and church nursery, etc.
The long signal range of the device enables guests to walk around during the waiting period. As a result, it will help to keep the place quiet and uncrowded. The system will satisfy different customers’ requirements by providing various settings, such as different alert modes, group calling, mute base sound.
Features
- Six choices of alert modes: Combinations of sound, flashing and vibration.
- Customize different calling numbers from 1 – 998 by repair them.
- Build-in rechargeable lithium battery provides long operation life.
- Mute sound for base: Type 000 and press “CALL”.
- Group call for all the pagers: Type 999 and press “CALL”.
- For long distance calling, please pull out the antenna.
Technical Data
Receiver
Operation Voltage| DC3.7V (Rechargeable lithium battery)
Charging Voltage| DC5V
Operation Frequency| 433.92MHz
Standby Current| 1 ± 0.5MA
Operation Current| 100±20mA
Receive Sensitivity| -117dBm ± 2dBm
Battery Capacity| 250 mAh
Decoder| Learning Code (AM)
Transmitter
Operation Voltage| Dv7 5V/2A Power Adapter
Operation Frequency| 433.92MHz
Standby Current| 24±5mA
Transmit Current| 100±30mA
Encoder| Learning Code (AM)
Diagram of receiver
Button function
(Power)
The upper position is Power ON,
The lower position is Power OFF.
(Power)
Step 1: Switch the power to “OFF” position.
Step 2: Keep holding the “STOP” button.
Step 3: Switch the power back to “ON” position while holding the “STOP” button
at the same time.
Step 4: Release the “STOP” button. Now you have already change to the next
mode.
Step 5: Repeat the procedures until you find the right mode you need.
(Mode)
- Vibration Buzzer Flashing
- Vibration Flashing
- Buzzer Flashing
- Buzzer Only
- Flashing Only
- Vibration Only
Change number paper
Take out the transparent plexiglass cover in the front of the receiver, then
put a number paper inside the paper slot. And then put back the cover.
Note: While do the pairing operation, take out the cover and paper
firstly.
Contact us
FCC Warning
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>