T-Mobile SD-7000T SyncUp Drive User Manual
- October 27, 2023
- T-Mobile
Table of Contents
T-Mobile SD-7000T SyncUp Drive
About This Manual
Thank you for choosing this SyncUP DRIVE SD-7000T. To keep your device in its best condition, please read this manual and keep it for future reference.
Notice
This manual has been designed with the utmost care to ensure the accuracy of
its content. However, all statements, information and recommendations
contained therein do not constitute a warranty of any kind, either expressed
or implied.
Please refer to For Your Safety to be sure to use your phone properly and
safely.
Disclaimer
Images and screenshots used in this manual may differ from the actual product.
Content in this manual may differ from the actual product or software.
Trademarks
Other trademarks and trade names are the property of their respective owners.
Version No. : 1.0
Edition Time: August 1st, 2019
Getting Started
Know your OBD (On-Board Diagnostics) Device
LED Indicator Status
Installing your OBD device
- Download the T-Mobile SyncUP DRIVE Application from Google Play and the Apple App Store.
- Log-in to your App and follow the onboarding process
- Make sure your vehicle is parked outside in a safe location and the engine is turned off.
- Connect your OBD device into the OBD connector port (or into an extension cable if it is required – not included). Ensure that your OBD device is connected in the correct direction.
NOTE: When installing your OBD device, be mindful to prevent damaging the connector pins.
-
Align the device with the port and plug it in for a snug fit. The OBD (On-Board Diagnostics) connector is usually located on or under the dash, on the driver’s side. Other possible locations are at the center console or inside the glove compartment area (see below figure for possible reference).
-
Once Device is connected, go for at least a 10 min Drive.
-
Once powered up, your OBD device automatically searches for and connects to your network provider’s mobile broadband network.
-
Connect your smartphone or other WPS (Wi-Fi Protected Setup) – enabled devices to your network:
Use your normal Wi-Fi application on the client device to search for the available wireless network
-
Select the Wi-Fi network name on your Smartphone WIFI menu; the initial WIFI network name (also called SSID) is T-Mobile_ Broadband## where ## are the 2 last digits of your device IMEI number
-
Input the Wi-Fi network password: for the initial password, refer to the card provided within your product gift box
-
Launch your browser to surf the Internet
Manage Your OBD Device and Settings
The SyncUP Drive OBD Dongle Device includes a 4G Mobile Hotspot accessible via
local connectivity (Wi-Fi).
It includes the newest 802.11 b/g/n/ac Wi-Fi connectivity, both for 2.4 and
5GHz, enabling an enhanced customer experience with the newest generations of
smartphones or tablets.
To personalize the OBD device and change the Wi-Fi settings, use the SyncUP DRIVE Application WIFI configuration menu:
- Wi-Fi ON/OFF
- Change Wi-Fi network (called SSID) and Wi-Fi password
Note: Functionality to configure the Wi-Fi connection frequency bands (2.4/5GHz) will be added to the App during a future App update
Connect Devices to your OBD Device’s Wi-Fi
You can connect up to 5 wireless devices such as smartphones, laptops,
tablets, digital cameras, printers, gaming consoles, and digital picture
frames to your OBD device’s Wi-Fi network.
You can connect a wireless device to your Wi-Fi network by entering the Wi-Fi
password.
Reset the OBD Device
You can reset the OBD device to the factory settings via the OBD device Reset
Pinhole.
Insert a pin into the Reset Pinhole and hold for at least 10 seconds. After
the device has reset, reconnect Wi-Fi devices.
NOTE: When you reset the OBD device, any currently connected devices will
lose access and will have to be reconnected after the OBD device restarts.
Use Your OBD Device
This chapter describes the main features of the App for managing your OBD device.
Wi-Fi Hotspot Configuration Screen
- Wi-Fi ON/OFF (by default: ON)
- Modify Wi-Fi local network SSID name (by default: T-Mobile Broadband XX)
- Modify Wi-Fi password (by default: set randomly in factory)
Troubleshooting
Physical Inspection
Ensure that the Device is adequately plugged in the vehicle OBDII port.
Refer to the LED Indicator Status section in this manual.
Device Conditions Status via SyncUP DRIVE Application
Within the SyncUP DRIVE Application Help Menu, you will be able to check
historical and current information related to your Device conditions.
Frequently Asked Questions
Compatible vehicles
Your vehicle will be automatically identified when installing your OBD device
for the first time.
However, if your experience missing features when using your device, visit the
https://www.t-mobile.com/offers/syncup web page to check compatibility.
Contact your customer care if your vehicle does not appear on the list.
NOTE: Electric cars and other vehicles, like heavy duty trucks,
motorcycles and ATVs, are not compliant with your OBD device.
Specifications
Mechanical specifications
- Dimensions (without connector):
68 x 51 x 27 mm 2.67 x 2.00 x 1.06 in
Supported RF bands
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>