K1616 Series Radio Remote Control Transmitter

Product Information

Specifications

• Model: HS HML(2400 & 2400)

• Manufacturer: Inmotion Controls, Inc.

• Guarantee/Warranty: Covered against material, construction, and
  manufacturing defects

• Guarantee/Warranty Exclusions: Normal wear and tear, consumable
  parts, unauthorized modifications, incorrect installation/use,
  condensation and water damage

Chapter 1: Customer Information

Thank you for purchasing an Inmotion Controls, Inc. radio remote
control. It is important to read all instructions carefully before
mounting, installing, and configuring the product. This manual
provides general information on operating the radio remote control
transmitter.

IC Statement

This device complies with Industry Canada license-exempt RSS
standard(s). Operation of this device is subject to the following
conditions: (1) it may not cause interference, and (2) it must
accept any interference, including interference that may cause
undesired operation of the device. IC: 10821A-8989616201

Chapter 2: General Description

No specific information provided in the user manual extract for
Chapter 2: General Description.

Chapter 3: Receiver

No specific information provided in the user manual extract for
Chapter 3: Receiver.

Chapter 4: Troubleshooting

No specific information provided in the user manual extract for
Chapter 4: Troubleshooting.

Product Usage Instructions

Guarantee, Service, Repairs, and Maintenance

Inmotion Controls, Inc. products are covered by a
guarantee/warranty against material, construction, and
manufacturing defects. During the guarantee/warranty period,
Inmotion may replace the product or faulty parts. Work under
guarantee/warranty must be carried out by Inmotion Controls,
Inc.

The following are NOT covered by the guarantee/warranty:

• Faults resulting from normal wear and tear

• Parts of a consumable nature such as pushbuttons, relays,
  fuses, etc.

• Products that have been subject to unauthorized
  modifications

• Faults resulting from incorrect installation and use

• Condensation and water damage

Maintenance: Repairs and maintenance must be carried out by
qualified personnel. Use spare parts from Inmotion Controls, Inc.
only. Contact your representative if you require service or other
assistance. Keep the product in a dry, clean place. Keep contacts
and antennas clean. Wipe off dust using a slightly damp, clean
cloth.

Frequently Asked Questions (FAQ)

1. 1. Q: What is covered by the guarantee/warranty?

A: The guarantee/warranty covers material, construction, and
manufacturing defects of the product.

1. 1. Q: Who should carry out repairs and maintenance?

A: Repairs and maintenance should be carried out by qualified
personnel.

1. 1. Q: Can I use spare parts from other manufacturers?

A: It is recommended to use spare parts from Inmotion Controls,
Inc. only.

1. 1. Q: How should I clean the product?

A: Wipe off dust using a slightly damp, clean cloth. Keep
contacts and antennas clean.

Contents
Contents Guarantee, service, repairs and maintenance
Chapter1: Customer information General Information on Safety
Chapter2: General description General description END USER INSTRUCTIONS
Chapter 3: Receiver (Technical Data) HS HML(2400 & 2400)
Chapter 4: Troubleshooting
Guarantee, service, repairs and maintenance Inmotion Controls, Inc. products are covered by a guarantee/warranty against material, construction and manufacturing defects. During the guarantee/warranty period, Inmotion may replace the product or faulty parts. Work under guarantee/warranty must be carried out by Inmotion Controls, Inc.
The following are NOT covered by the guarantee/ warranty: Faults resulting from normal wear and tear Parts of a consumable nature such as pushbuttons, relays, fuses etc. Products that have been subject to unauthorized modifications Faults resulting from incorrect installation and use Condensation and water damage
Maintenance: Repairs and maintenance must be carried out by qualified personnel. Use spare parts from Inmotion Controls, Inc. only. Contact your representative if you require service or other assistance. Keep the product in a dry, clean place. Keep contacts and antennas clean. Wipe off dust using a slightly damp, clean cloth.
2

Chapter 1: Customer Information
Thank you for purchasing an Inmotion Controls, Inc. radio remote control. READ ALL INSTRUCTIONS CAREFULLY BEFORE MOUNTING, INSTALLING AND CONFIGURATING THE PRODUCT. This manual includes general information concerning the operation of the radio remote control transmitter.
General Information on Safety ·Persons under the influence of drugs and/or alcohol and/or other medicine that impairs their reaction may not assemble, disassemble, install, put into operation, repair or operate the product. ·All conversions and modifications of an installation/system must conform to the relevant safety requirements. Work on the electrical equipment must be performed only by qualified, authorized personnel and in accordance with the relevant safety requirements. ·In the event of malfunctioning, visible defects or irregularities, the product must be stopped, switched off and the relevant master switches must be switched off.
FCC Part 15 FCC ID: TX ­ (RN489896162JK915S) / RX ­ (RN489896162JK915) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
European Union Regulatory Notice This device bearing the CE marking is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This device complies with the following harmonized European standards. Safety: EN 60950-1:2006+A11:2009+A1:2010+A12:2011 EMC: ETSI EN30 1489-1 V1.9.2 2001-09; ETSI EN 301 489-3 V1.4.1 2002-08 Radio: ETSI EN 300 220-1 v2.4.1: 2012; ETSI EN 300 220-2 v2.4.1: 2012 The following CE marking is valid for EU harmonized telecom products.
IC Statement (IC: 10821A-8989616201) This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
3

Chapter 2: General Description
4

Chapter 2: General Description
5

Chapter 3: Receiver
6

Chapter 3: Receiver
7

Chapter 4: Troubleshooting
8

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>