LUTEC 6935501330 Tuda Smart LED Wall Lamp with Solar and Sensor User Manual
- June 12, 2024
- LUTEC
Table of Contents
- PACKAGE CONTENTS
- TOOLS REQUIRED
- Safety Instructions
- Technical Data
- Installation
- First Use
- Download the free LUTEC connect App
- Sign up & log in
- Set-up
- Smartspeaker
- Personal Settings & Support
- Bluetooth mesh technology Easy Connection
- Function
- Battery Change
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
**LUTEC 6935501330 Tuda Smart LED Wall Lamp with Solar and Sensor User Manual
**
PACKAGE CONTENTS
TOOLS REQUIRED
Safety Instructions
-
You can consult the Safety Instructions on our website: www.lutec.com/service/safetyinstructions
-
Please scan the QR code underneath. For your convenience you can find these Safety Instructions also in the box.
-
The battery must be removed from the luminaire before it is scrapped. The battery is to be disposed of safely.
-
The operating time depends on the charging performance in daytime. This would be affected by environment e.g. weather condition andlocation.
-
Keep batteries out of the reach of children. Do not leave the batteries lying around.
-
There is a risk of children or animals swallowing them. Consult a doctor immediately if a battery is swallowed.
-
Use only rechargeable batteries of the recommended type. Other rechargeable or single-use batteries could explode during charging.
-
Do not allow rechargeable batteries to short-circuit. Otherwise the rechargeable batteries may overheat, become a fire hazard or explode.
-
Never throw rechargeable batteries into fire or water.
Technical Data
Bulb Type:| LED (8.5W)
The light source of this luminaire is not replaceable; when the light source
reached its end of life the whole luminaire shall be replaced
---|---
Battery:| 2 x 3.7 V 2200 mAh Li-ion battery. Item nr: 9759804000
| Conformity with all relevant EC Directive requirements
IP44| Splash-proof
| Class III product – designed to be supplied from a SELV (Separated or Safety
Extra-Low Voltage) power source
| Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or
local store for recycling advice.
Installation
First Use
Primer uso
It is recommended to put the solar panel in the sun for 8 hours to charge the
battery
Download the free LUTEC connect App
Sign up & log in
Set-up
- Register
- Register a new account
- Log in
- Home interface
- Device auto detect
- Add new device
- Bluetooth search and connect
- Select device to add
- Confirm selection
- Ready for use
Smartspeaker
With additional voice control Gateway – Sold separately
Please first connect with Access Box
Personal Settings & Support
Personal Settings & Support
Bluetooth mesh technology Easy Connection
Bluetooth® technology, the global standard for simple, secure wireless connectivity, now supports mesh networking. The new mesh capability enables many-to-many device communications and is optimized for creating mid to large- scale device networks. Bluetooth mesh allows you to solve more complex range and distance problems.
Function
not connected
At dusk, the motion sensor becomes active.
Any movement within the detection reach will switch-on the light. The light stays on for 30 sec. At dawn, the motion sensor will deactivate.
Battery Change
Costumer Support
LUTEC Europe NV
Herentalsebaan 425
B-2160 Wommelgem
Belgium
+32 3 284 51 62
LUTEC UK Ltd
110 Brooker Road
EN9 1JH Waltham Abbey
United Kingdom
LUTEC USA LLC
149B Houston Rd
Troutman NC 28166, USA
+877-714-8669
LUTEC China Head Office
CN8, Far-East Industry Park
Yuyao,Zhejiang
China
DESIGNED IN EUROPE, MADE IN CHINA
info@lutec-europe.com
service@lutec.com
www.lutec.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>