TOOLPORT Everest 6 m x 8 m 6 m x 12 m PVC Tent Instruction Manual
- June 16, 2024
- TOOLPORT
Table of Contents
TOOLPORT Everest 6mx8m 6mx12m PVC Tent
Product Information
Specifications
- Model: Everest
- Dimensions: 6m x 8m, 6m x 12m
- Languages: DE/CH/AT GB PL NL FR CZ ES IT SE DK
- Valid Until: 04/2023-02
Product Usage Instructions
-
Safety Instructions
Before using the product, please read and follow the safety instructions provided in the user manual. This will ensure safe usage and prevent any accidents or damages. -
Assembly Instructions
To assemble the Everest tent, follow the step-by-step instructions provided in the user manual. Make sure to carefully follow each step to ensure proper assembly and stability of the tent. -
Before First Use
Prior to using the tent for the first time, it is recommended to thoroughly clean and inspect all components. This will ensure that the tent is in good condition and ready for use. -
Cleaning and Storage
After each use, clean the tent using mild soap and water. Avoid using harsh chemicals that may damage the material. Allow the tent to dry completely before storing it. Store the tent in a cool, dry place to prevent mold and mildew growth. -
Environmental Considerations
When disposing of the tent or any of its components, please do not throw them away with ordinary garbage. Instead, recycle them to minimize environmental impact. If you are unsure about proper disposal methods, contact the manufacturer or an authorized sales representative for guidance. -
Guarantee and Customer Service
If you have any questions, or issues, or need replacement parts or accessories, please contact our customer service department. Provide the article number and any relevant information to expedite the process. Retain the proof of purchase (receipt) for warranty claims or inquiries.
FAQs
-
Q: Can the tent withstand wind and snow?
A: The tent has not been tested for wind and snow loads. Please monitor weather forecasts and take appropriate measures to protect or disassemble the tent before adverse conditions occur. -
Q: How should I clean the tent?
A: Clean the tent using mild soap and water. Avoid using harsh chemicals that may damage the material. Allow the tent to dry completely before storage. -
Q: How should I store the tent?
A: Store the tent in a cool, dry place to prevent mold and mildew growth. Ensure the tent is completely dry before storing it to avoid any damage. -
Q: How do I dispose of the tent?
A: Do not dispose of the tent or its components with ordinary garbage. Instead, recycle them to minimize environmental impact. Contact the manufacturer or an authorized sales representative for guidance on proper disposal methods.
Safety Instructions
Introduction
Congratulations on the purchase of your new product and welcome to TOOLPORT. Our customer service department or authorized sales representative will be happy to answer your questions and give any valuable instructions. Your new tent will give you the freedom to plan many activities. It can be used at a party, to screen you from the sunlight, as a shelter, for storage, and in many other ways. Please observe the instructions provided below to extend the useful life of your tent.
Important
Please read these assembly instructions before usage of the tent and keep it
for future reference.
Safety
The tent was not tested for wind and snow indicated by the manufacturer.
Therefore, these loads are not covered by a guarantee. Please watch the
weather forecasts to be able to properly protect or disassemble the tent
before problems appear.
Warnings
- Tents are intended for temporary accommodation and should be taken down in adverse weather conditions.
- Always be sure to keep sufficient distance to hoses as well as gas and power lines to avoid possible damage.
- Please check the area for power cables and gas lines.
- Ask your local authority for further information to avoid damages.
- When using suitable heaters (available e. g. in specialist shops), keep a minimum distance of 1.2 m to the tarp material.
- Open fire or heaters with open flames such as patio heaters, umbrella heaters, gas heaters, etc.
- should not be used in any case.
- The person setting up the tent is responsible for adequately securing it to ensure its safety.
- Please check the anchoring constantly to avoid damage.
- A stable anchoring can extend the endurance of the tent.
- Please wear head protection, gloves, and solid shoes.
- The heavy metal parts could have sharp edges and could be oily because of rust prevention treatment.
- Please make sure that there is no permanent snow load.
- It should be removed right away.
- The same applies to rain and other forms of load.
- Children should not play with the spare parts of the tent.
- These components must be adequately protected.
- Please find a flat and even ground base to pitch the tent.
- Only those materials provided with the tent can be used.
Caution!
Please check whether the ground base is suitable for your purpose. The tent
can be used also during temperatures a few degrees below zero. However, before
such use, the tarp material must be stored at a temperature of at least 10 °C
for a sufficiently long time, and then unwrapped at such, or higher
temperature. Otherwise, the material may break at points of folds. Each
country has separate regulations regarding movable structures (tents) and
unmovable structures. Please ask your local authorities whether permission be
obtained to pitch the tent. In some countries, this depends on the size of the
tent. The tarps should not come into contact with any objects with sharp
edges.
Contents
item no. | description | ID | 6x8m | 6x12m |
---|---|---|---|---|
31896 | Connector 3-way for roof Ø62mm x 680mm | 1 | 2 | 2 |
31906 | Connector 4-way for roof Ø62mm x 680mm | 2 | 3 | 5 |
31967 | pipe roof Ø62mm x 1260mm | 3 | 10 | 14 |
31969 | pipe roof Ø62mm x 2340mm | 4 | 10 | 14 |
31943 | pipe leg Ø62mm x 2260mm | 5 | 10 | 14 |
31976 | pipe roof top Ø62mm x 1910mm | 6 | 4 | 6 |
31963 | pipe roof Ø42mm x 2040mm | 7 | 24 | 36 |
31952 | pipe lower leg door frame Ø62mm x 2260mm | 8 | 4 | 4 |
31982 | pipe upper leg door frame Ø62mm x 930mm | 9 | 4 | 4 |
31928 | pipe endwall Ø40mm x 880mm | 10 | 4 | 4 |
31949 | pipe lower end wall Ø32mm x 780mm | 10A | 4 | 4 |
31913 | foot plate corner Ø62mm | 11 | 4 | 4 |
31919 | foot plate Ø62mm | 12 | 6 | 10 |
31916 | foot plate door Ø62mm | 12A | 4 | 4 |
31996 | Ratchet | 13 | 10 | 14 |
31997 | Ratchet for roof cover | 13A. | 4 | 4 |
31934 | pipe horizontal roof brace for Door (with wheels) Ø30mm x 2080mm | 14 | ||
4 | 4 | |||
31937 | pipe horizontal roof brace Ø25mm x 2060mm | 15 | 6 | 10 |
31989 | pipe vertical roof brace Ø25mm x 1160mm | 15A | 5 | 7 |
31922 | pipe diagonal Ø38mm x 2280mm | 16 | 4 | 4 |
32001 | Clip Ø62mm | 16A | 12 | 12 |
32007 | pipe Ø32mm x 2250mm fastenbar (fabric) Male | 17 | 6 | 10 |
32008 | pipe Ø32mm x 1490mm fastenbar (fabric) Female | 17 | 2 | |
32015 | pipe Ø32mm x 1150mm fastenbar (fabric) Female | 17 | 2 | |
30915 | bolt M8X70 | 18 | 104 | 140 |
item no. | description | ID | 6x8m | 6x12m |
--- | --- | --- | --- | --- |
32000 | bolt M10X80 | 19 | 34 | 46 |
32013 | pipe for door Ø32mm x 2200mm Male | 20 | 2 | 2 |
32014 | pipe for door Ø32mm x 2200mm Female | 20 | 2 | 2 |
31259 | peg 100cm massive | 21 | 42 | 54 |
31262 | bolt M10X30 | 22 | 14 | 22 |
31272 | bolt M10X60 | 23 | 6sets | 6sets |
31889 | Big band for ratchet | 24 | 10 | 14 |
31995 | Plastic cap | 25 | 12 | 12 |
31998 | Rope | 26 | 1 bundle | 1 bundle |
Roof cover | 27 | 1 | 1 | |
Front and back cover | 28 | 2 | 2 | |
32012 | Bungee 16 cm type 1 black | 29 | 2 | 2 |
tent stakes
Assembly instructions
Base Installation
Frame Installation
Door Installation
Roof Installation
Before the first usage
Please unpack the cartons and check against the packing list enclosed whether all parts have been delivered. Metal parts have been covered by a thin film of lubricant in the manufacturer‘s plant. Some parts may have more than the ordinary amount of lubricant on them. In such cases, use a cloth to remove excess lubricant. Please excuse us for that. The screws joining the pipes with connectors must be tightened manually, using a hexagon key or an automatic screwdriver, set at max. level 2, to avoid material wear.
Cleaning and storage
- Please do not use aggressive chemicals to clean the tarp material.
- The best cleaning agent is water with a slightly alkaline reaction.
- The tent should not be folded and packed when wet.
- First, dry it thoroughly.
- Do not make any modifications to the metal structure of the tent, such as connecting and/or welding additional loads, making grooves, and/or any deformations.
- Please be careful when handling individual components of the tent.
- During disassembly, please use the packing list again to check the possible missing parts, to avoid problems with the next assembly.
- For outdoor use only.
- To be stored outdoors only.
Enviroment
After the end of usage, please do not dispose of the tent or any of its
components with ordinary garbage, but recycle it. If in doubt, please ask the
manufacturer or an authorized sales representative. We will be happy to help
you recycle the tent correctly, at the same time preserving the environment.
Guarantee and customer services
For more information or replacement parts and accessories, please write an email or contact us by telephone. Our customer service will be happy to help you. For further questions please provide the article number. The product was manufactured with utmost care and under constant control. If you have any complaints, please contact the service hotline or contact us by e-mail. Our service staff will coordinate with you as soon as possible. Please keep the proof of purchase (receipt).
Do you have any questions?
Contact us, we are happy to help!
TOOLPORT GmbH • Gutenbergring 1–5 • 22848 Norderstedt
GERMANY Telefon +49 (0)40 / 60 87 27 17
Fax +49 (0)40 / 60 87 27 37
www.toolport.de
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>