BaByliss PRO BABNTHS40 Professional Hairsetter Instruction Manual
- June 6, 2024
- BaByliss PRO
Table of Contents
BaByliss PRO BABNTHS40 Professional Hairsetter
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:
DANGER
To reduce the risk of electrocution:
- Always unplug this appliance immediately after using.
- Do not use while bathing.
- Do not place or store appliance where it can fall or be pulled into a tub or sink.
- Do not place in or drop into water or other liquid.
- Do not reach for an appliance that has fallen into water. Unplug immediately.
WARNING
To reduce the risk of burns, electrocution, fire, or injury to persons:
- An appliance should never be left unattended when plugged in.
- Do not pull, twist or wrap line cord around appliance.
- This appliance should not be used by, on, or near children or individuals with certain disabilities.
- Use this appliance only for its intended use as described in the manual. Do not use attachments not recommended by BaByliss PRO.
- Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to an authorized service center for examination and repair.
- K eep the cord away from heated surfaces.
- Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
- Never use while sleeping.
- Never drop or insert any object into any opening or hose.
- Do not use outdoors or operate where aerosol ( spray ) products are being used or where oxygen is being administered.
- Do not use an extension cord with this appliance.
- Do not touch heat sink that hold rollers, as they will be hot.
OPERATING INSTRUCTIONS
How to Operate your Hairsetter:
- Place hairsetter on a firm, flat surface. With lid closed, plug cord into outlet. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
- Switch the hairsetter to the “LO” or “HI” position to begin warming the rollers. The red light will go on after switch on, the ionic energy will be automatically activated.
- The rollers are ready to use approximately 5 minutes after turned on. The rollers have each reached optimum temperature and you can begin styling your hair. Please refer to the HOW TO CURL YOUR HAIR section.
HOW TO CURL YOUR HAIR
- Place ends of hair on roller and wind toward the scalp. Roll up hair firmly, and secure clip, crossing over roller. Do not place clip in roller slit.
- The firmness of the curl is regulated by the temperature, the diameter of the rollers and the length of time the roller is left in your hair.
- For tight, firm curls, leave rollers in the hair for at least ten minutes before removing. For soft, wavy curls, the rollers should be removed from the hair after a shorter period of time.
- Removing roller: hold roller in one hand while removing clips with the other. Gently drop roller (DO NOT PULL) and let curl bounce back after roller has been completely removed. Let cool for one minute for a firmly set curl, and then style your hair into a look that lasts for hours.
- Hair should be clean and dry or slight damp – never wet when setting.
IMPORTANT:
After using the hair setter several times, you will find the best timing
for the texture of your hair and for the result you desire. The ionizing
function generates negative ions that can:
- Neutralize positive charge on flyaway, frizzy hair.
- Eliminate static electricity.
- Contribute to shine.
NANO TITANUM™
Your new Nano Titanium™ roller set has many benefits. Nano Titanium™ is an
exceptional conductor of heat and is stable in ultra-high temperatures. The
Nano Titanium™ technology fuses micro particles of titanium with ceramic to
provide the ultimate heating performance for beautiful, healthy-looking hair.
Nano titanium™ also yields maximum far-infrared heat, penetrating the hair
from within for gentle styling without damage, and emits negative ions for
faster styling while locking in hair’s natural moisture. These professional
rollers will give you smooth, silky curls while eliminating frizz.
GET TO KNOW YOUR HAIRSETTER
BABNTHS40 – 30 Rollers
- 8 Jumbo (1-1/2″)
- 8 Large (1-1/4″)
- 8 Medium (1″)
- 6 Small (3/4″)
USER MAINTENANCE
Your hairsetter is designed for professional use and is virtually maintenance- free. This product represents the highest standards of workmanship and engineering research. If cleaning becomes necessary, disconnect the appliance from the power source. Allow the setter to cool. Clean the unit and the heating posts with a cloth. (Occasionally you may want to clean your rollers. Use a damp cloth and mild detergent or soap.) If any abnormal condition occurs, unplug the hairsetter, allow it to cool, and return it to an authorized service representative for repair.
STORAGE
Allow hairsetter to cool. Handle cord carefully for longer life; avoid jerking
or straining at plug connections. Place hairsetter out of reach of children in
a safe, dry location.
CAUTION
NEVER allow the power supply cord to be pulled or twisted. Never wrap the cord
around the unit. Damage will occur at the high flex point of entry into the
unit, causing it to rupture and short circuit. Inspect the cord frequently for
damage. Stop use immediately if damage is visible or if unit stops or operates
intermittently.
WARNING: I F YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF, YOU’RE WRONG.
KEEP AWAY FROM WATER Everyone knows that electricity and water are a dangerous combination. But did you know that an electrical appliance is still electrically live even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged.
LIMITED TWO-YEAR WARRANTY
BabylissPro will repair or replace (at our option) your unit free of charge for 24 months from the date of purchase if the appliance is defective in workmanship or materials. To obtain service under this warranty, return the defective product to the service center listed on back, together with your purchase receipt and $5.00 for postage and handling. California residents need only provide proof of purchase and should call 1-800-326-6247 for shipping instructions. In the absence of a purchase receipt, the warranty period shall be 24 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 24-MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. IN NO EVENT SHALL BABYLISSPRO BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FORBREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion or limitation of special, incidental, or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
Service Center
BabylissPro
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307