METROVAC MB-3CD Air Force Master Blaster Instruction Manual

: June 6, 2024
: METROVAC

Table of Contents

METROVAC MB-3CD Air Force Master Blaster Instruction Manual
Before using, check your plug to make sure it is the proper voltage for
AIR FORCE MASTER BLASTER
AIR FORCE MASTER BLASTER Model MB-3CD
SERVICE
AIR FORCE MASTER BLASTER
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

METROVAC MB-3CD Air Force Master Blaster Instruction Manual

Before using, check your plug to make sure it is the proper voltage for

your country. Avant utilisation,

UK plug 220-240 volt Prise UK 220-240 volts

EURO plug 220-240 volt EURO prise 220-240 volts

AUSTRALIAN PLUG 220-240 Prise AUSTRALIAN 220-240

USA plug 110-120 can also be used in JAPAN
USA bouchon 110-120 peut également être utilisé au Japon.

AIR FORCE MASTER BLASTER

A. Two 4.0 Peek HP 2 Stage Dual Fan Motors (MVC-157D)
B. Handle (MVC-143A)
C. 10 ft. Commercial Grade Hose (MVC-56D)
D. Blower Nozzle (MVC-195)
E. On/Off Switch (MVC-74DA)
F. Cinq Kit Pièce de Fixation (BCK-5)

AIR FORCE MASTER BLASTER Model MB-3CD

The AIR FORCE MASTER BLASTER is designed to cut drying time by as much as 75%. The MASTER BLASTER provides gentle heat and dramatic air velocity to dry cars or motorcycles quickly and thoroughly.

Insert the grounded Power Supply Cord into a grounded outlet.
IMPORTANT: PRODUCT MUST BE GROUNDED.
WARNING: INPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONDUCTOR CAN RESULT IN A RISK OF ELECTRIC SHOCK!
Move car/motorcycle to a dry area to eliminate risk of electric shock.
Fit the 10 ft. by 1 ½” Hose (D) over the steel tube protruding from the front end cap of the power unit. Tighten the adjustable clamp to keep the hose securely on the dryer.
Start the dryer by pushing the On/Off Switch (B) from left to right. Dry the vehicle from top to bottom.
Attach or remove the Neoprene Nozzle, or other attachments from the hose to control the air velocity.
For even greater air flow, the hose cuff on the blower end screws off in a counter clockwise direction and screws back on in a clockwise direction.

SERVICE

NORMAL MAINTENANCE, SUCH AS MOTOR BRUSH REPLACEMENT, CAN BE MADE AT YOUR LOCAL SERVICE SHOP. MOTOR BUSH LIFE IS APPROXIMATELY 500 HOURS. BRUSHES SHOULD BE CHECKED BETWEEN 200-250 HOUR INTERVALS. SEE ENCLOSED INSTRUCTIONS. FILTER LIFE IS DEPENDENT ON USAGE. CHECK AND REPLACE WHEN REQUIRED.
CAUTION: DO NOT DROP THIS MACHINE. MOTOR MALFUNCXTION CAUSED BY PRODUCT BEING DROPPED IS NOT COVERED UNDER WARRANTY.