METROVAC SK-1 Air Force Blaster Sidekick Instruction Manual

June 6, 2024
METROVAC

METROVAC-logo

METROVAC SK-1 Air Force Blaster Sidekick

DELIBERATELY MADE BETTER IN THE U.S.A®

Before using, check your plug to make sure it is the proper voltage for your country.

  • 1.3 HP Motor (MVC-308)
  • On/Off Switch (MVC-74E)
  • Handle (MVC-49A)
  • Air Flare (MVC-195AB)
  • Blower Nozzle (MVC-196AB)
  • 14 inch Power Cord (MVC-285)

The BLASTER SIDEKICK is designed to cut drying time by as much as 75%. The BLASTER SIDEKICK dryer provides “Gentle Heat” and dramatic air velocity to dry motorcycles quickly and thoroughly.

READ ALL INSTRUCTIONS BEFORE USE

AIR FORCE BLASTER SIDEKICK
Model SK-1

  1. Insert the grounded plug of the Power Supply Cord (F) into a grounded three conductor 16/3 extension cord.
    IMPORTANT: THE PRODUCT MUST BE GROUNDED.
    WARNING: IMPROPER CONNECTION OF THE EQUIPMENT-GROUNDING CONDUCTOR CAN RESULT IN A RISK OF ELECTRIC SHOCK!

  2.  Move your motorcycle to a dry area of the driveway or garage to eliminate risk of electric shock.
    HOLD THE DRYER BY THE HANDLE

  3. Start your Blaster Sidekick by pushing the On/Off Switch (B) up for On and down for Off.

  4. The Blower Nozzle (E) and the Air Flare (D) fit directly at the end of the steel tube to control the air velocity.

PLEASE NOTE:
DUE TO THE TREMENDOUS VELOCITY OF AIR PRODUCED BY THE AIR FORCE BLASTER SIDEKICK, YOU MAY EXPERIENCE SOME AIR VENTING BY THE SEAMS, THIS IS COMPLETELY NORMAL AND HELPS KEEP THE UNIT RUNNING EFFICIENTLY.
FILTER LIFE IS DEPENDENT ON USAGE. CHECK AND REPLACE WHEN REQUIRED.
CAUTION: DO NOT DROP THIS APPLIANCE. MOTOR MALFUNCTION CAUSED BY-PRODUCT BEING DROPPED IS NOT COVERED UNDER WARRANTY.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals