Baseus BS-W508 Simple 2-in-1 Wireless Charger Turbo Edition User Manual
- June 6, 2024
- Baseus
Table of Contents
User Manual
Simple 2inl Wireless Charger Turbo Edition
Please read these instructions completely and keep them properly
Product Introduction
Thanks for your choosing our wireless charger. this wireless charger support charging for dual devices at the moment 8etoreyou use this product. Please read this manual carefully and save it.
Specification
Brand: Wows
Model: BS-MOB
Name: Baseus Simple 3n1 Wireless Charger
Material: aluminum alloy + glass + PC
Color: Black
Interface: Type- C Input
Input current: DC 9V 2.67A Max
Compatibly: SupponsQi-compliant wireless charging devices
Product Size: Wireless charger. 160.0mm 80.0mm 7.3mm
Product Weight: Wireless charger: 1303g (without packaging)
Package List
Wireless Charger 1
Adapter 1
User Manual 1
Warranty card 1
Charging Cable* 1
Instruction
-
After the product is inserted into the adapter, the indicator light will be on.
-
Charging mode: green light breath.
-
Point your phone at the center of the wireless charger, and the wireless charger starts working.
If it cannot work properly, please adjust the position of the mobile phone until the mobile phone displays normal charging; (please refer to the following figure for placement) -
FOD: light flicker.
Cautioni
- To achieve the best performance of this wireless charger, please use the standard adapter inside the package.
- In the process of charging, do not put any metal materials like a key, ring, metallic phone case, etc.. on the back of the phone device or wireless charger directly.
- It may occur occasional intermittent charging or serious heating due to the unjustified position of the phone receiver coil and wireless charging, please try to hold your phone, then move your phone to carry out the alignment.
- This product has over current /voltage protection, it will be shut off or reduce output if used in an incorrect way, Please check whether your device is abnormal or not.
- Please use this product under the temperature of 0-25°c, DO NOT Expose the product to water, fire, or overheated and lower temperature environment, the product will be unavailable, Do not let children touch accessories.
- Please use a dry, clean soft cloth to clean the product surface, DO NOT use chemistry material and soap to clean.
- The manufacturer will not be responsible for those defects caused by users, Please kindly understand. 8.iPhone will not be quickly charged in below three statuses:
a)The electricity power >60%
b)i0S version: below 11.1.2
c)iPhone’ s temperature: > 35-40°c
Shenzhen Times Innovation Technology Co., Ltd
Add: 5th Floor, Building B, Baseus Intelligence Park,
No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District,
Shenzhen TEL: +86 755-82433603 Hotline: 4000-712-711
Copyright©2010-2020 Shenzhen Times Innovation Technology Co., Ltd. All Rights
Reserved
The ‘QV symbol is a trademark of the Wireless Power Consortium
Warnings
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.