Huizhou Ronghui Technology RHWII2IN1 Controller User Manual
- June 6, 2024
- Huizhou Ronghui Technology
Table of Contents
Huizhou Ronghui Technology RHWII2IN1 Controller
OVERVIEW
All products and company names are trademarks or registered trademarks of their respective holders. These specifications are subject to change without notice. Version.
APEX CE SPECIALISTS LIMITED
UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK,
NEW MALLOW ROAD, CORK, T23AT2P, IRELAND
Info@apex-ce.com
euservice168@outlook.com
Manufacturer: Huizhou Ronghui Technology Co., Ltd.
Address: Liboshui First Industrial Zone, Shiwan Town, Boluo County, Huizhou
City Tel: 0752-6802133 Fax: 0752-6802036
Product Description
This product is suitable for the Wii game consoles. It uses a Bluetooth module to wirelessly communicate with the console. The built-in CMOS sensor can detect infrared rays and output the position information of the corresponding indicator of the handle. There is a sound module in the CMOS sensor to convey the information sent by the Wii game console. It senses the sound, and the G-Sensor acceleration sensor (Acceleratermeter) senses the movement of the handle to detect the player’s swing motion path and direction when the Wiimote is manipulated, and the Wiimote tilt angle (linear acceleration of gravity and center of gravity) when the player is standing still. The built-in MotionPlus detects the real-time rotation direction and force (such as rotation vector and angular velocity) when the player controls Wiimote.
Function Description
-
Provide 13 digital buttons
Front buttons:Wii host power(Power),Cross key(Up,Down,Left,Right),A,[+],Home,[-],1,2.
Back button:B, Register
Provide 4 player controller number indicator lights
An indicator that shows which player is the user -
Provide 1 set of Motion Sensor
With kinetic energy-sensing function, it can detect the change of the controller’s stereo tilt. -
Provide 1 set of Bluetooth module
Use Bluetooth wireless communication to connect with the host. -
Provide a set of CMOS Sensor sensors
Detect the infrared light of the Sensor Bar, obtain the movement information of the light spot, and provide the movement information of the Bluetooth indicator. Support host sensitivity switching function, the built-in sound group uses the Slave IIC communication interface, and the Wii host transmits the 6KHz sampled audio data to the Wii remote through the Bluetooth communication interface and decodes the 6KHz ADPCM audio data through the Class D amplifier MCU. Play the sound via the speaker. -
Provide a set of MotionPlus
MotionPlus uses a gyro sensor (Gyroscope) to detect the real-time rotation direction and force (such as rotation vector and angular velocity) when the player controls the Wiimote to increase the joy of control in interactive games. -
Provide a set of power supply
Use two AA alkaline batteries to supply Remote and built-in MotionPlus power. -
Provide a set of motors
Provide vibration feedback function. -
Provide a speaker
Provide sound output, with 8 ohm 0.5W specification speakers. -
Expansion unit connection terminal
Can connect Nunchuk and other compatible peripheral devices
Bluetooth receiving distance
The Bluetooth receiving distance of the handle can be received normally in
an open environment within 10M.
Note: It cannot be used in harsh environments such as a strong magnetic field
or a complex power grid around it, so as not to affect the service life of the
handle.
WARNINGS:
- Do not put this product into the fire to bake or burn, so as to avoid danger and environmental pollution.
- Please do not wipe with corrosive liquids to avoid hard objects scratching the surface of the case and affecting the appearance.
- Do not place this product in the following environments: places that are too hot, cold or too humid, places that are exposed to direct sunlight, and places that are too dusty.
- When the surface of the cabinet is stained with dirt and dust, wipe it with a dry muslin cloth. Do not use cleaning fluids and other chemical solvents. So as not to corrode the surface of the casing and damage the components in the injection machine.
- When not in use for a long time, the battery should be taken out.
- Do not try to disassemble, disassemble or modify any part of this product by yourself. Such behavior may damage the product and invalidate your product warranty.
- If you want to discard this product, please put it in a professional recycling station for disposal.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.