cellularline TUCK Wireless Stereo Bluetooth Headset with Charging Case User Guide
- June 6, 2024
- cellularline
Table of Contents
cellular line TUCK Wireless Stereo Bluetooth Headset with Charging
Case
OVERVIEW
PRELIMINARY OPERATIONS
Charge the Charging Case and earbuds before initial setup. CONNECTION TO THE PHONE: before connecting CELLULARLINE TUCK to the phone, the connection between the two earbuds must be established. Open the flap of the Charging Case and activate the phone’s Bluetooth to search for devices and select CELLULARLINE TUCK when detected.
OPERATION
Turning on: remove the devices from the charging case or keep the touch
control pressed for 5 seconds
Turning off place the earbuds inside the charging case or keep the touch
control pressed for 5 seconds
Answering a call
you can answer calls from both earbuds by pressing the MFB touch control once.
Ending a call
you can end calls from both earbuds by pressing the touch control once. Play/Pause: press the touch control on one of the two earbuds once
Voice assistant
keep the touch control pressed for 2 seconds on one of the two earbuds.
FF
press the touch control on the right earbud twice to advance to the next track.
Rew
press the touch control of the left earbud twice to return to the previous track.
LOUDSPEAKER VOLUME ADJUSTMENT: press the touch control (1) on the right earbud 3 times to increase the volume, to decrease it press the touch control on the left earbud 3 times. LOW BATTERY INDICATOR: the red flashing of the LED indicates that the earbuds’ battery charge is low.
CHARGING THE EARBUDS
insert the devices into their respective slots and close the cover door of the Charging Case, charging will start automatically. The red LED indicates charging in progress, when charging is complete, the LED will switch off. CHARGING THE
CHARGING CASE
Plug the charging cableinto any USB port and connect the connector to the MicroUSB charging socket, the LED will flash red slowly, turning green when charging is complete. Once the charging is complete, disconnect the Charging Case from the power supply.
Reset
if there are problems with operation of the device, you can reset it to restore its initial operation.- Delete previous pairings from the Bluetooth® menu of the phone. Turn off the Bluetooth®.
- Take an earphone out of the charging case and close the cover. Put on the earphone and quickly press the button 5 times. You will hear “RESET” confirming success of the procedure. Put the earphone inside the charging case.
- Take an earphone out of the charging case and close the cover. Put on the earphone and quickly press the button 5 times. You will hear “RESET” confirming success of the procedure. Put the earphone inside the charging case.
- Press the button on the charging case. The LED will light up.
- Remove both earphones from the case. Activate the Bluetooth® on your phone and pair again.
EARBUDS TECHNICAL SPECIFICATIONS
- Bluetooth : v5
- Profiles supported : Headset – Handsfree – A2DP – AVRCP
- Range : 10mt
- Bluetooth Frequency Range : 2.402HZ-2.48HZ
- Battery Voltage : 3.7V
- Battery Capacity : 30mAh X 2
- Charging Case battery capacity : 300mAh / 1.11Wh
- MicroUSB port Voltage (V) : 5V
- MicroUSB port current (A) : 1A
- ERP : 5.30dBm
- SAR :< 20mW(13dBm)
- Stand by Time : 150 hours
- Talk Time : about 3 hours
- Play Time : about 3 hours
- Earbud charging : about 1.5 hours
- Charging Case charging : about 1.5 hours
- Weight: 41 grams
Cellularline S.p.A. declares that this bluetooth headset with charging case complies with Directive 2014/53/EU. The full text of the EU Declaration of conformity is available at the following Internet address: www.cellularline.com/_/declaration-of-conformity. Cellularline S.p.A. also declares that this bluetooth headset with charging case complies with Directive 2011/65/EU updated from 2015/863/EU.
References
- Cellularline Site WW | Homepage
- Cellularline Site WW | Homepage
- Declaration of conformity | Cellularline Site WW
- CellularLine Site IT | Homepage