AJAZZ A1 Wireless Bluetooth 5.0 Gaming Earbud Instructions
- June 6, 2024
- AJAZZ
Table of Contents
Recharge
Need to put the earphones in the earphone box
Game mode
“3-click” left or right earphone functional area, English voice prompt “Boom-
Game ON”
Exit game mode
“3-click” left or right earphone functional area, English voice prompt “Boom-
Game OFF”
Turn on
Take out the headset from the charging compartment to automatically turn on
turn on /off
Put the earphone into the charging compartment to automatically shut down, or
manually long press the function area for about 5 seconds
play/pause
Left or right ear “double dice function area
Answer the call/hang up the call
Left or right earphone “click” the ribbon
Reject the call
Left or right earphonenshod press” the function area for about 2 seconds
Voice assistant Siri
“Press and hole the left or right earphone of the ribbon to hear “beep” and
release your hand
Follow-up connection
Take out the headset and pair the headset with the device. If the pairing is
not successful, Then manually click on the Bluetooth pairing Interface.
The red and blue lights flash alternately for pairing status. The red and blue
lights flash regularly as the working state.
Initial connection
Open the headset box and take out the headset, turn on the Bluetooth to search
for the pano name. ‘Al’ and connect
Basic Information
Product name: Al Support protocol: A2DP1.3 / AVCTP1.4/ AVRCP1.6 /
HFP1.7/GAVDP1.3/AAC/ Chip model: Torch ATS3015 Bluetooth version: V5.0 BR+EDR
Bluetooth chip specification: 4’4’0.75mm Working distance: 10 meters (without
obstacles) Working frequency: 2.44GHZ-2.48GHZ Power level: classl, class2 Talk
time: 5 hours Music time: 5 hours Standby time: 120 hours Charging time: 1.5
hours Call mode: Binaural call Charging method: Type-C charging compartment,
magnetic earphone charging Product material: ABS+PC Product weight: earphones
about 3.4g/charging box + earphones 42g Product size: earphone size:
34.18*21mm/ charging box size: 65’48.29mm
http://weixin.qq.com/r/WnXF3XnEliTprT2_9yBI
Product Warranty
Warranty Card
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. -
Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>