AJAZZ AK33 Wireless Keyboard User Guide
- June 6, 2024
- AJAZZ
Table of Contents
AJAZZ AK33 Wireless Keyboard User Guide
Driver Installation
Use the type-C cable to connect the keyboard to the computer. When the computer is on, the driver required by the keyboard will be installed automatically.
Technical Specification
Brand: AVAZINEi
Product Model:AK33 Item Dimensions:310.5x120x36.8±0.5mm
Item Weight: 560g±20g Keys Number:82key
Keyboard Wire: 1.6m Professional anti interference shielded five core
wire Item Interface: Type-C Working Current: 150mA Life Time:50 million
times
Keys: N-key Rollover
System Requirement: Windows XP/Win7/Win8, Win10/MAC
Multimedia Keys
FN+F5=Main Page
FN+F6=Play/Stop
FN+F7=Previous Song
FN+F8=Play/Pause
FN+F9=Next Song
FN+F10=Volume-
FN+F11=Mute
FN+F12=Volume+
FN+WIN_L=Windows Lock
FN+A=Mac System Switch
FN+S=Windows System Switch FN+DEL=INSERT
FN+END=PRTSC/SYSRQ FN+HOME=PAUSE/BREAK
Backlight Modes
FN+PGUP: Backlit switches to the previous mode, 18 backlit modes (Turn off, keep the current mode) FN+PGDN: Backlit switches to the next mode, 18 backlit modes (Turn off, keep the current mode)
Backlight Modes
Brightness adjustment, increase / decrease of 5 levels brightness. Speed adjustment, increase / decrease of 5 levels speed.
Item Connection
FN+ESC Long press 3S to restore the factory default settings (Clear Bluetooth
pairing information)
FN+TAB Bluetooth and Wired modes switch
FN+1,2,3 3 Bluetooth Devices switch
Indicator light description
CAPSLK Indicator Light
- Letter Case Indicator, the light is on when capital is on and off when it is off.
- When charging, the indicator light turns red and goes out after full charge.
Tab Indicator Light
FN+TAB Bluetooth and Wired modes switch, after the mode switch is successful, the backlight flashes twice
Bluetooth Mode
- FN+TAB to switch to Bluetooth Mode
- Short press FN+1,FN+2, and FN+3 to switch
- different devices. The backlit flashes once to indicate that the switch is complete.
- Long press the corresponding FN+1, FN+2, and FN+3 for 3 seconds until the indicator light of 1.2.3 flashes to enter the matching state. The indicator light will stop flashing when the code matching is successful.
- Keyboard name: AK33 Bluetooth 5.0 Keyboard
- When Bluetooth is connected, the backlit will be turned off without operation for 5 minutes, wake up with any operation.
- When Bluetooth is connected, the device will enter the sleep state without any operation for 20 minutes. Any operation will wake up and disconnect the device before.
- Built-in 1000mA lithium battery, which can be charged when connect USB cable.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>