Shenzhen Ajazz Tongchuang Electronic Technology STK61 Gaming Keyboard Instruction Manual
- June 5, 2024
- Shenzhen Ajazz Tongchuang Electronic Technology
Table of Contents
Shenzhen Ajazz Tongchuang Electronic Technology STK61 Gaming Keyboard
Basic parameters:
Basic parameters
- Product Brand: DAIDAI
- Product Model: STK611
- Size: 291x102x39 +0.5mm
- Weight: 550gt10g
- Buttons: wired full key without punch,any 6 keys in
- Bluetooth mode without punch
- Contact life: 50 million times
- Wired: 1.6 meters, type C cable
- Wireless: Bluetooth 5.0
- Battery: Lithium battery 1000 mAh
- System requirements: Windows 2000/XP/Vista/7/8/108&Mac OS/Linux
Uppercase and lowercase indicator lights,on the CAPS button, to indicate that the function is turned on, the indicator light is off, and the function off indicator is on (default) Lock Win key indicator light: FN+Win lock/unlock Win, the indicator light is on the Win key, the function is on, the indicator light is off, the function.
FUNCTION KEYS
- FN+ESC=
- FN+1 F1
- FN+2 F2
- FN+3-F3
- FN+4 F4
- FN+5=F5
- FN+6=F6
- FN+7 F7
- FN+8-F8
- FN+9=F9
- FN+10-F10
- FN+”-“=F11
- FN+”=”=F12
- FN+Left Shift+ESC
- FN+Left Shift+1=!
- FN+Left Shift+2=@
- FN+Left Shift+3=#
- FN+Left Shift +4=*
- FN+Left Shift+5=%
- FN+Left Shift+6=A
- FN+Left Shift+7=&
- FN+Left Shift+8=E*
- FN+Left Shift+9=
- FN+Left Shift+10=)
- FN+Left Shift+”-“=-.
- FN+Left Shift+”=”=+
- FN+U=PrtSc
- FN+1=ScrLK
- FN+O Pause
- FN+J=ns
- FN+K=Home
- FN+L=PgUp
- FN+””=End
- FN+”>”=PgDn
- FN+ Backspace =Delete
BLUETOOTH
When using Bluetooth mode, when the keyboard power is low, the backlight of the space key keeps flashing to indicate that it needs to be charged When the voltage is lower than 3.3V, the space key low voltage indicator flashes to remind Space key indicator light, the indicator light flashes when the voltage is low, flashes 4 times quickly when charging, and then goes out, it means charging, and it flashes 5 times when it is full, which means it is fully charged. Wired mode: When FN+TAB is switched.arnd the QW/E key light does not flash, it is the wired mode; Type-c line access can be wired mode regardless of whether the bottom button is ON or OFF.(The factory default Bluetooth mode. It can be used only after FN+Tab switch) Wireless mode: When the bottom switch is in the ON state, it is in Bluetooth mode. For the first use, it must be paired to be used normally. In the wireless Bluetooth state, if there is no operation within 1 minute, the keyboard will enter the sleep state, the keyboard backlight will be off, press any key to wake up directly.deep sleep 10 minutes without operation, enter deep sleep The backlight is on, the default is always on, and the continuous use time is about 6 hours The backlight is off, and the continuous use time is about 40 hours. Bluetooth does not have any device link. Switch to the ON state (must be in Bluetooth mode) No operation standby time: about 550 hours. Bluetooth connection is successful, no operation standby time: about 400 hours.
Bluetooth Connection:
- Make sure the bottom switch is in the ON state (that is, the keyboard is in Bluetooth mode):f it is not in Bluetooth mode, please FN+TAB Switch wired/wireless.
- Use FN+Q/W/E to select any combination of keys to connect, such as FN+Q.
- Press and hold FN+P for 3 seconds, at this time,P seconds will flash continuously to enter the wireless pairing mode
- Turn on the computer or wireless phone, search for the Bluetooth device name “STK61 BT Keyboard” and connect successfully;
- The connection is successful, the P key stops flashing, and it can be used;:Quickly press FN+Q/W/E once and release it to switch the paired devices. The indicator light flashes slowly after successfully reconnecting, and the corresponding color of the current device is always on.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: this device may not cause harmful interference,
and this device must accept any interference received, including interference
that may cause undesıred operation. Changes or modifications not expressly
approved by the party responsible for compliance could void the user s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relOcate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RE exposure requirement. The device can be used in portable exposure condition without restriction.