Shenzhen Huacai Lijing Electronic Technology KZQY24J Remote Controller User Manual
- June 6, 2024
- Shenzhen Huacai Lijing Electronic Technology
Table of Contents
Specification
| Input Voltage | DC12V-16V |
|---|---|
| Operating tempera | -20°C~50°C |
| IP Grade | IP68 |
| Control mode | mobile phone+infrared direct control |
| Color | 16 million colors |
| Chasing mode | more than 200 chasing mode |
The package comes with a led light bar, Controller, Remote control, screws, Brackets, Bracket rubber.
How to build up a light bar
Remote control instructions
- 01 —— Press it for three seconds to enter the setting mode and the RGB halo will be off as well. Select one or more static colors then press the button 05 09 or 13 to set up the mode of FLASH JUMP or FADE and it also has a memory function.
- 02 —— Turn on Halo ring
- 03 / 11 —— 1-Changing the speed of the halo ring when the main white light is off.
- 2-Changing the speed of flashing to the main white light when it is on.
- 04 —— Turn off the Halo ring.
- 05 —— Flashing to the Halo ring.
- 06 / 08 —— 1-Changing the modes halo ring when the main white light is off.
- 2-Changing the brightness of the main white light when it is on.
- 07 —— Auto modes of halo ring
- 09 —— Colorful jumping of halo ring
- 10 —— Static Orange
- 12 —— Static White
- 13 —— Colorful fading of halo ring
- 14 —— Static Red
- 15 —— Static Green
- 16 —— Static Blue
- 17 —— Static Gold
- 18 —— Static Yellow
- 19 —— Static Cyan
- 20 —— Static Purple
- 21 —— Static Pink
- 22 —— Main white Flashing
- 23 —— Main white light OFF
- 24 —— Main white light ON
How to connect the Bluetooth
- Scan the QR code of the control box or manual, or search “LED LAMP” on the app store to download the app. http://url.szszjkj.com/79810915950
- Turn on your phone’s Bluetooth, and match the app successfully.
Open the APP show the Bluetooth connection fails.
- please check whether your Bluetooth device is in a state of electricity.
- please check whether your Bluetooth device is within range of a mobile phone’s Bluetooth.
- usually mobile phone Bluetooth within 10 meters, different mobile have different distances.
- please refer to the previous Bluetooth device connection to reconnect the device.
- please uninstall the APP first, then restart your phone and reinstall the APP again!!!
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference
that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. if this equipment
does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>