T G TG-351 TWS Cylindrical Portable Wireless Bluetooth Speaker User Manual
- June 1, 2024
- T G
Table of Contents
T G TG-351 TWS Cylindrical Portable Wireless Bluetooth Speaker
Specifications
- Compliance: Part 15 of FCC Rules
- Conditions: Must not cause harmful interference; must accept any received interference
Product Usage Instructions
- Compliance with FCC Rules:
- Ensure that the device is operated by part 15 of the FCC Rules to prevent harmful interference.
- Avoiding Interference:
- Place the device in a location where it can accept interference without causing undesired operation.
- Modifications:
- Do not make any changes or modifications to the device that are not expressly approved by the responsible party for compliance to avoid voiding the user’s authority to operate the equipment.
PRODUCT SPECIFICATIONS
Wireless: V5.3
Support : L2CAP/A2DP/AVCTP, can receive an AUDIO signal and control the
AUDIO device.
Support HSP/HFP(Handsfree profile), with HANDS-FREE functions.
- Working distance: 10M
- SNR: ≥ 90db
- Battery: 3.7V about 1200mAh
- Normal volume playing time: about 4h
- Speaker driver: C57mm*1
- Power: 42/5W *1
- Frequency response: 120Hz-20KHz
- Unit size: 9292109mm
- Unit weight: about 349g (not including accessories)
- Charging: 5V/500mA
- Charging time: about 4h
PRODUCT FEATURE
- International advanced wireless chip and circuit design techniques, support wireless devices.
- With the FM function, can search radio station broadcasts automatically.
- With a Hi-Fi speaker, to make sure a clear and bright sound.
- Support Micro SD card and USB card, play MP3 format audio.
- The wireless working distance is 10 meters.
- With AUX line in, can directly connect the outside devices, for example, tablet PC/TV/cell phones.
- It will close automatically after 30 minutes if disconnected Wireless
- Support TWS.
KEY AND SLOT FUNCTION
- DC 5V slot: Use the standard Micro USB V8 charging cable for power charging.
- TF slot: It can decode and play MP3 format audio when put TF card into the slot.
- USB slot: It can decode and play MP3 format audio when the USB card into the slot.
- AUX line in the slot: Use the Mini 3.5 head input through outside devices.
- Power switch: Press long for power on /power off.
- When playing music, (USB card/TF card/Wireless/line in), short press for “play/pause”.
- When playing music, Press short for the last song, and long press to turn down the volume.
- When playing music, press short for the next song, and long press to turn up the volume.
- Short press to switch model (USB card/TF card/Wireless/line in/FM).
Keep the two speakers under Wireless mode without pairing, press the “M” key for 2-3 seconds on either of the speakers until hear a hint and meantime the indicator light stops flashing, now it is TWS mode, then can paire the mobile; Press the “M” key for 3 seconds either of the speaker to stop TWS after disconnect wireless.
NOTE: In the FM mode, put in an AUX cable to increase the FM radio
signal.
If this speaker crashes during use, you can press and hold the power button
for 8 seconds to reset and shut down.
USB/T card pls use FAT32 format.
FCC Statement
Warning Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and (2)
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Frequently Asked Questions
- Q: What should I do if the device is causing interference?
- A: If the device is causing interference, try relocating it to a different position to minimize the impact on other equipment.
- Q: Can I modify the device for better performance?
- A: No, any modifications not approved may void your authority to operate the equipment. Contact the responsible party for compliance for any approved modifications.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>